Uncertainty in shear resistance models of reinforced concrete beams according to fib MC2010

This study is an outcome of research project 16‐04132S, supported by the Czech Science Foundation, and of research project IPT‐370000‐2010‐029, supported by the Spanish Ministry of Economy and Competitiveness.

[1]  Arnaud Castel,et al.  Experimental and analytical study of corroded shear-critical reinforced concrete beams , 2014 .

[2]  Joost C. Walraven,et al.  Critical shear displacement theory: on the way to extending the scope of shear design and assessment for members without shear reinforcement , 2016 .

[3]  Pier Paolo Rossi,et al.  Evaluation of the ultimate strength of R.C. rectangular columns subjected to axial force, bending moment and shear force , 2013 .

[4]  Aurelio Muttoni,et al.  Shear Strength of Members without Transverse Reinforcement as Function of Critical Shear Crack Width , 2008 .

[5]  Aurelio Muttoni,et al.  Levels-of-Approximation Approach in Codes of Practice , 2012 .

[6]  Milan Holický,et al.  Verification of existing reinforced concrete bridges using the semi-probabilistic approach , 2013 .

[7]  Kent Gylltoft,et al.  Safety formats for non-linear analysis of concrete structures , 2012 .

[8]  Ane de Boer,et al.  Proposal for the extension of the Eurocode shear formula for one-way slabs under concentrated loads , 2015 .

[9]  Peter Tanner,et al.  Acceptable risks to persons associated with building structures , 2015 .

[10]  Miroslav Sykora,et al.  Target reliability for existing structures considering economic and societal aspects , 2017, Life-Cycle of Structural Systems.

[11]  Robby Caspeele,et al.  The Design Value Method and Adjusted Partial Factor Approach for Existing Structures , 2013 .

[12]  Milan Holický,et al.  Economic and human safety reliability levels for existing structures , 2015 .

[13]  Sofia M. C. Diniz,et al.  Assessment of epistemic uncertainties in the shear strength of slender reinforced concrete beams , 2016 .

[14]  Oguzhan Bayrak,et al.  Design for Shear Based on Loading Conditions , 2006 .

[15]  Michael P. Collins,et al.  Where is Shear Reinforcement Required? Review of Research Results and Design Procedures , 2008 .

[16]  Sven Thelandersson,et al.  Uncertainty caused variability in preliminary structural design of buildings , 2015 .

[17]  Sankaran Mahadevan,et al.  Reliability analysis under epistemic uncertainty , 2016, Reliab. Eng. Syst. Saf..

[18]  Milan Holický,et al.  Assessment of model uncertainties for structural resistance , 2016 .

[19]  Miroslav Sykora,et al.  Uncertainties in resistance models for sound and corrosion-damaged RC structures according to EN 1992-1-1 , 2015 .

[20]  Gaetano Russo,et al.  Shear strength design formula for RC beams with stirrups , 2013 .

[21]  David Mikolášek,et al.  Experimental and Numerical Analysis of Steel Joints in Round Wood , 2014 .

[22]  Giuseppe Mancini,et al.  Modelling uncertainties for the loadbearing capacity of corroded simply supported RC beams , 2015 .

[23]  Aurelio Muttoni,et al.  Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results , 2015 .

[24]  Aurelio Muttoni,et al.  Background to the fib Model Code 2010 shear provisions – part I: beams and slabs , 2013 .

[25]  Vladimir Cervenka,et al.  Reliability‐based non‐linear analysis according to fib Model Code 2010 , 2013 .

[26]  Giuseppe Mancini,et al.  Global safety format for non‐linear analysis of reinforced concrete structures , 2013 .

[27]  F. E. Grubbs.  Procedures for Detecting Outlying Observations in Samples , 1969 .

[28]  Antoni Cladera,et al.  Shear Design and Assessment of Reinforced and Prestressed Concrete Beams Based on a Mechanical Model , 2016 .

[29]  Max A.N. Hendriks,et al.  A quantification of the modelling uncertainty of non-linear finite element analyses of large concrete structures , 2017 .

[30]  Gabriele Bertagnoli,et al.  Reliability-based evaluation of bond strength for tensed lapped joints and anchorages in new and existing reinforced concrete structures , 2018 .

[31]  Antoni Cladera,et al.  Shear-flexural strength mechanical model for the design and assessment of reinforced concrete beams subjected to point or distributed loads , 2014, Frontiers of Structural and Civil Engineering.

[32]  William M. Bulleit,et al.  Uncertainty in Structural Engineering , 2008 .

[33]  Josef Hegger,et al.  Querkraftmodell für Bauteile aus Normalbeton und Hochleistungsbeton , 2006 .

[34]  Agnieszka Bigaj-van Vliet,et al.  Reliability in the performance‐based concept of fib Model Code 2010 , 2013 .

[35]  F. Vecchio,et al.  Simplified Modified Compression Field Theory for Calculating Shear Strength of Reinforced Concrete Elements , 2006 .

[36]  Kent Gylltoft,et al.  Safety formats for nonlinear analysis tested on concrete beams subjected to shear forces and bending moments , 2011 .