Two-Degree-Of-Freedom Dynamic Model-Based Terminal Sliding Mode Control with Observer for Dual-Driving Feed Stage

The position synchronous control of multi-axis gantry-type feed stage is crucial in precision machine tools. Industrial position control which aims to widen the bandwidth and improve disturbance rejection of single axis is not enough to achieve precise synchronization in a dual-driving feed stage. The characteristics diversity, transmission-mechanism deformation, and mechanical coupling effect between dual axes will degrade the control accuracy. Hence, the novel two-degree-of-freedom (2-DOF) dynamic model-based terminal sliding mode control (TSMC) with disturbance and state observer is proposed in this paper for the synchronous control of a 2-DOF dual-driving feed stage. The 2-DOF dynamic model, based on Lagrange equation, is established along with the parameters identification method. The predictive natural frequencies and vibration modes frequencies by the proposed dynamic model are compared by a modal experiment. Then, the 2-DOF dynamic model-based TSMC is provided to satisfy the tracking and synchronization control. In order to reduce the chattering and to increase the robustness against the mechanical coupling, the disturbance and state observer is designed. Moreover, Lyapunov stability criterion is used to analyze the stability of the proposed control scheme. Finally, an industrial application of 2-DOF dual-driving feed stage is utilized to validate the effectiveness of the proposed control scheme. The proposed 2-DOF dynamic model-based TSMC with observer has been effectively demonstrated to improve synchronous performance and tracking accuracy.

[1]  Daehie Hong,et al.  Synchronizing dual-drive gantry of chip mounter with LQR approach , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[2]  Jun Ma,et al.  Integrated Mechatronic Design in the Flexure-Linked Dual-Drive Gantry by Constrained Linear–Quadratic Optimization , 2018, IEEE Transactions on Industrial Electronics.

[3]  Faa-Jeng Lin,et al.  DSP-Based Cross-Coupled Synchronous Control for Dual Linear Motors via Intelligent Complementary Sliding Mode Control , 2012, IEEE Transactions on Industrial Electronics.

[4]  K. S. Zakiuddin,et al.  Electronic Line Shafting-Control for Paper Machine Drives , 2012 .

[5]  E. Díaz-Tena,et al.  Propagation of assembly errors in multitasking machines by the homogenous matrix method , 2013 .

[6]  Masayoshi Tomizuka,et al.  Synchronization of Two Motion Control Axes Under Adaptive Feedforward Control , 1990 .

[7]  Eiji Shamoto,et al.  Design and application of a sliding mode controller for accurate motion synchronization of dual servo systems , 2013 .

[8]  Jang-Myung Lee,et al.  Tracking Error Constrained Terminal Sliding Mode Control for Ball-Screw Driven Motion Systems with State Observer , 2018 .

[9]  Yong Xiao,et al.  Generalized synchronization control of multi-axis motion systems , 2005 .

[10]  Jon Rigelsford,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2004 .

[11]  He Ling,et al.  Cross-coupled fuzzy logic sliding mode control of dual-driving feed system , 2018 .

[12]  T S Giam,et al.  Precision coordinated control of multi-axis gantry stages. , 2007, ISA transactions.

[13]  Yao Cheng.  Non-synchronous Error and Modeling of Dual-drive System in Gantry-type Machine Tools with Travelling Bridge , 2013 .

[14]  Yoram Koren,et al.  Advanced Controllers for Feed Drives , 1992 .

[15]  Sung-Chong Chung,et al.  Integrated design methodology of ball-screw driven servomechanisms with discrete controllers. Part I: Modelling and performance analysis , 2006 .

[16]  Sung-Soo Kim,et al.  Design of a dual-drive mechanism for precision gantry , 2002 .

[17]  Faa-Jeng Lin,et al.  Robust Adaptive Backstepping Motion Control of Linear Ultrasonic Motors Using Fuzzy Neural Network , 2008, IEEE Transactions on Fuzzy Systems.

[18]  Hong Lu,et al.  Dynamic Characteristics Analysis and Test of Dual-Driving Feed System Driven by Center of Gravity , 2018 .

[19]  Sam-Sang You,et al.  Precise position synchronous control of multi-axis servo system , 2008 .

[20]  Faa-Jeng Lin,et al.  Robust Fuzzy Neural Network Sliding-Mode Control for Two-Axis Motion Control System , 2006, IEEE Transactions on Industrial Electronics.

[21]  Oliver Sawodny,et al.  Friction parameter identification and compensation using the ElastoPlastic friction model , 2017 .

[22]  L. N. López de Lacalle,et al.  The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres , 2008 .

[23]  Aitzol Lamikiz,et al.  Recording of real cutting forces along the milling of complex parts , 2006 .

[24]  Wu-Sung Yao,et al.  Modeling and synchronous control of a single-axis stage driven by dual mechanically-coupled parallel ball screws , 2007 .

[25]  Kazuo Yamazaki,et al.  A Study on the Drive at Center of Gravity (DCG) Feed Principle and Its Application for Development of High Performance Machine Tool Systems , 2005 .

[26]  Sung-Soo Kim,et al.  Optimal Cross-Coupled Synchronizing Control of Dual-Drive Gantry System for a SMD Assembly Machine , 2004 .

[27]  Chek Sing Teo,et al.  Dynamic modeling and adaptive control of a H-type gantry stage , 2007 .

[28]  Long-Yeu Chung,et al.  Robust reliable Hinfinity control for uncertain nonlinear systems via LMI approach , 2008, Appl. Math. Comput..