A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC

In the preparation of electrodes for the proton exchange membrane (PEMFC), the effect of the fabrication method and the thickness of the gas diffusion layer and the impregnation method of Nafion solution on the cell performance was investigated, and unit cell tests were performed. The gas diffusion layer was prepared by rolling, spraying, and screen printing methods, and Nafion solution was impregnated using spraying and brushing methods. The diffusion layer in a PEMFC consists of a thin layer of carbon black mixed with polytetrafluoroethylene (PTFE) that is coated onto a sheet of macro-porous carbon backing cloth. The effects of different fabrication methods and thicknesses of gas diffusion layer are discussed in the light of porosimetry and I–V polarization curves and variables related to the electrode analyzed by numerical simulation. The spraying method proved to be more profitable for cell performance than the brushing method for the impregnation of Nafion solution because it reduced the charge transfer resistance and extended the three-phase region. The goals of this work are to find the optimum thickness of the gas diffusion layer and to undertake an analysis of the system.

[1]  Gregor Hoogers,et al.  Fuel Cell Technology Handbook , 2002 .

[2]  J. Jindra,et al.  Porosity and catalyst utilization of thin layer cathodes in air operated PEM-fuel cells , 1998 .

[3]  K. Yasuda,et al.  Effects of ionomer content on mass transport in gas diffusion electrodes for proton exchange membrane fuel cells , 2003 .

[4]  Sharon D. Fritts,et al.  Report of the Electrolytic Industries for the Year 1992 , 1993 .

[5]  E. Passalacqua,et al.  Influence of the PTFE content in the diffusion layer of low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[6]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[7]  A. A. Kornyshev,et al.  Modelling the performance of the cathode catalyst layer of polymer electrolyte fuel cells , 1998 .

[8]  E. Passalacqua,et al.  Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC , 1999 .

[9]  A. Parthasarathy,et al.  High energy efficiency and high power density proton exchange membrane fuel cells: Electrode kinetics and mass transport , 1991 .

[10]  Edson A. Ticianelli,et al.  Methods to Advance Technology of Proton Exchange Membrane Fuel Cells , 1988 .

[11]  R. Lemons.  Fuel cells for transportation , 1989 .

[12]  Shimshon Gottesfeld,et al.  Thin-film catalyst layers for polymer electrolyte fuel cell electrodes , 1992 .

[13]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[14]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[15]  Sanjeev Mukerjee,et al.  Effects of Nafion impregnation on performances of PEMFC electrodes , 1998 .

[16]  S. Gottesfeld,et al.  Oxygen Reduction Kinetics on a Platinum RDE Coated with a Recast Nafion Film , 1987 .

[17]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[18]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[19]  G. Squadrito,et al.  Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance , 2001 .

[20]  Charles R. Martin,et al.  Electrode kinetics of oxygen reduction at carbon-supported and unsupported platinum microcrystallite/Nafion® interfaces , 1992 .