Numerical electromagnetic analysis methods and its applications to surge phenomena

Full-wave numerical electromagnetic analysis (NEA) methods are defined as methodologies allowing the direct numerical solution of Maxwell's equations in both frequency and time domain. These methods are becoming the most promising approach to study complex transient phenomena that cannot be straightforwardly solved by means of circuit-theory or transmission line approaches (e.g. by using Electromagnetic Transient Program — EMTP). Indeed, as known, circuit-theory/transmission line based approaches cannot solve transients that involve non-TEM propagation modes. Furthermore, they cannot be applied in case of unknown circuit parameters. Within the context of NEA, this paper describes the basic theory of the finite-difference time-domain (FDTD) method as a representative NEA method. Also, some typical examples are presented to demonstrate its usefulness and advantages.

[1]  Jeremy A. Landt,et al.  Three Dimensional Time Domain Modelling of Lightning , 1987, IEEE Transactions on Power Delivery.

[2]  S. Gedney An anisotropic perfectly matched layer-absorbing medium for the truncation of FDTD lattices , 1996 .

[3]  R. Melo e Silva de Oliveira,et al.  Computational Environment for Simulating Lightning Strokes in a Power Substation by Finite-Difference Time-Domain Method , 2009 .

[4]  Roger F. Harrington,et al.  Field computation by moment methods , 1968 .

[5]  Taku Noda,et al.  Experimental and analytical studies of lightning overvoltages in wind turbine generator systems , 2009 .

[6]  G J Burke,et al.  Numerical Electromagnetic Code (NEC) - Method of Moments. A User-Oriented Computer Code for Analysis of the Electromagnetic Response of Antennas and Other Metal Structures. Part III. User's Guide. Volume 2. Revised. , 1977 .

[8]  K. Yamamoto,et al.  Transient grounding characteristics of wind turbines , 2012, 2012 International Conference on Lightning Protection (ICLP).

[9]  Andrew J. Poggio,et al.  Numerical Electromagnetic Code (NEC) , 1979, 1979 IEEE International Symposium on Electromagnetic Compatibility.

[10]  Taku Noda,et al.  Improvements of an FDTD-based surge simulation code and its application to the lightning overvoltage calculation of a transmission tower , 2007 .

[11]  Jeremy A. Landt,et al.  Three-Dimensional Time Domain Modeling of Lightning , 1987, IEEE Power Engineering Review.

[12]  Jin-Fa Lee,et al.  A perfectly matched anisotropic absorber for use as an absorbing boundary condition , 1995 .

[13]  Jean-Pierre Berenger,et al.  A perfectly matched layer for the absorption of electromagnetic waves , 1994 .

[14]  Kazuo Yamamoto,et al.  Transient Grounding Characteristics of an Actual Wind Turbine Generator System at a Low-resistivity Site , 2010 .

[15]  G. Mur Absorbing Boundary Conditions for the Finite-Difference Approximation of the Time-Domain Electromagnetic-Field Equations , 1981, IEEE Transactions on Electromagnetic Compatibility.

[16]  E. K. Miller,et al.  An integro-differential equation technique for the time-domain analysis of thin-wire structures. II. Numerical results , 1973 .

[17]  K. Yee Numerical solution of initial boundary value problems involving maxwell's equations in isotropic media , 1966 .

[18]  R. Higdon Absorbing boundary conditions for difference approximations to the multi-dimensional wave equation , 1986 .

[19]  S Sekioka,et al.  Analytical Surveys of Transient and Frequency-Dependent Grounding Characteristics of a Wind Turbine Generator System on the Basis of Field Tests , 2010, IEEE Transactions on Power Delivery.

[20]  Zhenpeng Liao,et al.  A TRANSMITTING BOUNDARY FOR TRANSIENT WAVE ANALYSES , 1984 .

[21]  Akihiro Ametani,et al.  A study of transient magnetic fields in a wind turbine nacelle , 2010, 2010 Asia-Pacific International Symposium on Electromagnetic Compatibility.