Back propagation genetic and recurrent neural network applications in modelling and analysis of squeeze casting process

Abstract Today, in competitive manufacturing environment reducing casting defects with improved mechanical properties is of industrial relevance. This led the present work to deal with developing the input-output relationship in squeeze casting process utilizing the neural network based forward and reverse mapping. Forward mapping is aimed to predict the casting quality (such as density, hardness and secondary dendrite arm spacing) for the known combination of casting variables (that is, squeeze pressure, pressure duration, die and pouring temperature). Conversely, attempt is also made to determine the appropriate set of casting variables for the required casting quality (that is, reverse mapping). Forward and reverse mapping tasks are carried out utilizing back propagation, recurrent and genetic algorithm tuned neural networks. Parameter study has been conducted to adjust and optimize the neural network parameters utilizing the batch mode of training. Since, batch mode of training requires huge data, the training data is generated artificially using response equations. Furthermore, neural network prediction performances are compared among themselves (reverse mapping) and with those of statistical regression models (forward mapping) with the help of test cases. The results shown all developed neural network models in both forward and reverse mappings are capable of making effective predictions. The results obtained will help the foundry personnel to automate and precised control of squeeze casting process.

[1]  S. Rajagopal.  Squeeze casting: A review and update , 1981 .

[2]  Pandu Ranga Vundavilli,et al.  Weighted Average-Based Multi-Objective Optimization of Tube Spinning Process using Non-Traditional Optimization Techniques , 2013, Int. J. Swarm Intell. Res..

[3]  Amalia Utamima,et al.  A comparative study of GA, PSO and ACO for solving construction site layout optimization , 2015 .

[4]  K. Neailey,et al.  Macrosegregation in thin walled castings produced via the direct squeeze casting process , 2003 .

[5]  Dilip Kumar Pratihar,et al.  Forward and reverse mappings in green sand mould system using neural networks , 2008, Appl. Soft Comput..

[6]  Prasad Krishna,et al.  Squeeze casting process modeling by a conventional statistical regression analysis approach , 2016 .

[7]  Wei-Chang Yeh,et al.  Artificial bee colony algorithm-neural networks for S-system models of biochemical networks approximation , 2010, Neural Computing and Applications.

[8]  Mustafa Inalli,et al.  Artificial neural networks and adaptive neuro-fuzzy assessments for ground-coupled heat pump system , 2008 .

[9]  Mehmet Esen,et al.  Forecasting of a ground-coupled heat pump performance using neural networks with statistical data weighting pre-processing , 2008 .

[10]  T. M. Yue,et al.  Squeeze casting of high-strength aluminium wrought alloy AA7010 , 1997 .

[11]  Z. Konopka,et al.  The solidification of squeeze cast AlCu4Ti alloy , 2007 .

[12]  B. Niroumand,et al.  Effects of squeeze casting parameters on the microstructure of LM13 alloy , 2009 .

[13]  Himadri Chattopadhyay,et al.  Simulation of transport processes in squeeze casting , 2007 .

[14]  Mustafa Inalli,et al.  Performance prediction of a ground-coupled heat pump system using artificial neural networks , 2008, Expert Syst. Appl..

[15]  Dilip Kumar Pratihar,et al.  Modelling of input–output relationships in cement bonded moulding sand system using neural networks , 2007 .

[16]  B. Niroumand,et al.  Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy , 2006 .

[17]  Abdulkadir Sengür,et al.  Artificial neural network and wavelet neural network approaches for modelling of a solar air heater , 2009, Expert Syst. Appl..

[18]  V. P. Arunachalam,et al.  Experimental study of squeeze casting of gunmetal , 2005 .

[19]  Hikmet Esen,et al.  Modelling and experimental performance analysis of solar-assisted ground source heat pump system , 2017, J. Exp. Theor. Artif. Intell..

[20]  Woo-Il Kim,et al.  The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy , 2001 .

[21]  Houfa Shen,et al.  Prevention of macrosegregation in squeeze casting of an Al-4.5 wt pct Cu alloy , 1998 .

[22]  Dilip Kumar Pratihar,et al.  Neural Network-Based Approaches for Forward and Reverse Mappings of Sodium Silicate-Bonded, Carbon Dioxide Gas Hardened Moulding Sand System , 2008 .

[23]  Paul Xirouchakis,et al.  An intelligent system for predicting HPDC process variables in interactive environment , 2008 .

[24]  L. J. Yang.  The effect of casting temperature on the properties of squeeze cast aluminium and zinc alloys , 2003 .

[25]  O. Weck,et al.  A COMPARISON OF PARTICLE SWARM OPTIMIZATION AND THE GENETIC ALGORITHM , 2005 .

[26]  Dilip Kumar Pratihar,et al.  Knowledge-based systems using neural networks for electron beam welding process of reactive material (Zircaloy-4) , 2014, J. Intell. Manuf..

[27]  P. Senthil,et al.  Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method , 2012 .

[28]  Dilip Kumar Pratihar,et al.  Expert systems in manufacturing processes using soft computing , 2015, The International Journal of Advanced Manufacturing Technology.

[29]  Mohan Kumar Pradhan,et al.  Recurrent neural network estimation of material removal rate in electrical discharge machining of AISI D2 tool steel , 2011 .

[30]  Dian Wu Zhou,et al.  Effects of squeeze casting parameters on solidification time based on neural network , 2013 .

[31]  Manolis A. Christodoulou,et al.  Adaptive Control with Recurrent High-order Neural Networks , 2000, Advances in Industrial Control.

[32]  L. J. Yang.  The effect of solidification time in squeeze casting of aluminium and zinc alloys , 2007 .

[33]  Mohamed Ben Amar,et al.  Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method , 2014 .

[34]  Prasad Krishna,et al.  Forward and Reverse Process Models for the Squeeze Casting Process Using Neural Network Based Approaches , 2014, Appl. Comput. Intell. Soft Comput..

[35]  Rong Ji Wang,et al.  Determination of temperature difference in squeeze casting hot work tool steel , 2012 .

[36]  S. Skolianos,et al.  Effect of applied pressure on the microstructure and mechanical properties of squeeze-cast aluminum AA6061 alloy , 1997 .

[37]  Pandu Ranga Vundavilli,et al.  Neural network-based expert system for modeling of tube spinning process , 2015, Neural Computing and Applications.