SAS Processing Results for the Detection of Buried Objects with a Ship-Mounted Sonar

In September 2002, TNO-FEL and GESMA carried out a sea experiment with a low frequency (20 kHz) sonar mounted on a mine hunter. To our knowledge, it is the first time the synthetic aperture sonar technique has been implemented on board an operational mine hunter for the purpose of buried mines detection. The collected data set is mainly made up of sonar runs in several SAS geometries (side scan, squinted, spotlight and tomographic configuration). This paper presents preliminary results that have been obtained after synthetic aperture processing of the sonar data, with or without using additional non-acoustic data for motion correction and geo-referencing. It is concluded that targets that are not too deeply buried can be detected. In addition, the technique has also been evaluated on non-military data for the purpose of surveying shipwrecks.

[1]  Lucan,et al.  5 = 6 M , 1993 .

[2]  B. Zerr,et al.  Experiments with a Ship-Mounted Low Frequency SAS for the Detection of Buried Objects , 2004 .

[3]  B. Zerr,et al.  Buried Mine Detection and Classification (Research Summary 1996-1999) , 1999 .

[4]  T. R. Clem,et al.  Progress in the development of buried minehunting systems , 2003, Oceans 2003. Celebrating the Past ... Teaming Toward the Future (IEEE Cat. No.03CH37492).

[5]  Hugh Griffiths,et al.  Experimental validation of autofocus algorithms for high-resolution imaging of the seabed using synthetic aperture sonar , 2003 .

[6]  D.C. Summey,et al.  Mobile Underwater Debris Survey System (MUDSS) , 1999, Oceans '99. MTS/IEEE. Riding the Crest into the 21st Century. Conference and Exhibition. Conference Proceedings (IEEE Cat. No.99CH37008).

[7]  A. Bellettini,et al.  Real- and synthetic-array signal processing of buried targets , 2002 .