Geometry Design Optimization of a Wind Turbine Blade Considering Effects on Aerodynamic Performance by Linearization

For a wind turbine to extract as much energy as possible from the wind, blade geometry optimization to maximize the aerodynamic performance is important. Blade design optimization includes linearizing the blade chord and twist distribution for practical manufacturing. As blade linearization changes the blade geometry, it also affects the aerodynamic performance and load characteristics of the wind turbine rotor. Therefore, it is necessary to understand the effects of the design parameters used in linearization. In this study, the effects of these parameters on the aerodynamic performance of a wind turbine blade were examined. In addition, an optimization algorithm for linearization and an objective function that applies multiple tip speed ratios to optimize the aerodynamic efficiency were developed. The analysis revealed that increasing the chord length and chord profile slope improves the aerodynamic efficiency at low wind speeds but lowers it at high wind speeds, and that the twist profile mainly affects the behaviour at low wind speeds, while its effect on the aerodynamic performance at high wind speeds is not significant. When the blade geometry was optimized by applying the linearization parameter ranges obtained from the analysis, blade geometry with improved aerodynamic efficiency at all wind speeds below the rated wind speed was derived.

[1]  Michael S. Selig,et al.  Application of a genetic algorithm to wind turbine design , 1996 .

[2]  Helge Aagaard Madsen,et al.  Optimization method for wind turbine rotors , 1999 .

[3]  K. Y. Maalawi,et al.  A practical approach for selecting optimum wind rotors , 2003 .

[4]  Mariusz Pawlak,et al.  Optimisation of wind turbine blades , 2005 .

[5]  Spyros G. Voutsinas,et al.  STATE OF THE ART IN WIND TURBINE AERODYNAMICS AND AEROELASTICITY , 2006 .

[6]  Jeppe Johansen,et al.  Design of a Wind Turbine Rotor for Maximum Aerodynamic Efficiency , 2009 .

[7]  João Tavares Pinho,et al.  An extension of BEM method applied to horizontal-axis wind turbine design , 2011 .

[8]  Xin Long,et al.  Aerodynamic loads calculation and analysis for large scale wind turbine based on combining BEM modified theory with dynamic stall model , 2011 .

[9]  Michele Messina,et al.  BEM theory: How to take into account the radial flow inside of a 1-D numerical code , 2012 .

[10]  Ismail H. Tuncer,et al.  Aerodynamic Shape Optimization of Wind Turbine Blades Using a Parallel Genetic Algorithm , 2013 .

[11]  Lin Wang,et al.  Optimized linearization of chord and twist angle profiles for fixed-pitch fixed-speed wind turbine blades , 2013 .

[12]  Joaquim R. R. A. Martins,et al.  Multidisciplinary design optimization of offshore wind turbines for minimum levelized cost of energy , 2014 .

[13]  Wen Zhong Shen,et al.  Prediction of the wind turbine performance by using BEM with airfoil data extracted from CFD , 2014 .

[14]  Mojtaba Tahani,et al.  Aerodynamic optimal design of wind turbine blades using genetic algorithm , 2014 .

[15]  Yun Zou,et al.  A Multi-Point Method Considering the Maximum Power Point Tracking Dynamic Process for Aerodynamic Optimization of Variable-Speed Wind Turbine Blades , 2016 .

[16]  M. Tahani,et al.  Aerodynamic design of horizontal axis wind turbine with innovative local linearization of chord and twist distributions , 2017 .

[17]  Jiankun Liu,et al.  Aerodynamic optimization for variable-speed wind turbines based on wind energy capture efficiency , 2018, Applied Energy.

[18]  Viviana Cocco Mariani,et al.  Wind turbine blade geometry design based on multi-objective optimization using metaheuristics , 2018, Energy.