Fuel cell powered octocopter for inspection of mobile cranes: Design, cost analysis and environmental impacts

In this paper, the possible development of a drone for mobile crane inspection is investigated. Since the flying time of the drones currently in commerce is too short for the designed application, proton exchange membrane fuel cells and lithium-ion batteries are considered as alternative power systems to extend the flying time. Both systems are analyzed from an economical point of view and a life cycle assessment is performed to identify the main contributors to the environmental impact. From a commercial point of view, the lightweight fuel cell, being a niche product, results more expensive with respect to the Li-ion battery. On the other hand, the life cycle assessment results show a lower burdens of both technologies with respect to other components of the two systems, as carbon fiber. The source of the hydrogen and the electricity mix play a critical role as well.

[1]  Janko Petrovčič,et al.  Impact of fuel cell and battery size to overall system performance – A diesel fuel-cell APU case study , 2016 .

[2]  T. Gutowski,et al.  Life cycle energy analysis of fiber-reinforced composites , 2009 .

[3]  Anders Hammer Strømman,et al.  Life cycle environmental assessment of lithium-ion and nickel metal hydride batteries for plug-in hybrid and battery electric vehicles. , 2011, Environmental science & technology.

[4]  Catur Aries Rokhmana,et al.  The Potential of UAV-based Remote Sensing for Supporting Precision Agriculture in Indonesia☆ , 2015 .

[5]  Lance W. Traub,et al.  Range and Endurance Estimates for Battery-Powered Aircraft , 2011 .

[6]  Jenn-Jiang Hwang,et al.  Sustainability study of hydrogen pathways for fuel cell vehicle applications , 2013 .

[7]  Anshuman Bhardwaj,et al.  UAVs as remote sensing platform in glaciology: Present applications and future prospects , 2016 .

[8]  P. Rizzi,et al.  A comparison of energy storage from renewable sources through batteries and fuel cells: A case study in Turin, Italy , 2016 .

[9]  Taegyu Kim,et al.  Compact PEM fuel cell system combined with all-in-one hydrogen generator using chemical hydride as a hydrogen source , 2015 .

[10]  Marcello Baricco,et al.  Case Studies of Energy Storage with Fuel Cells and Batteries for Stationary and Mobile Applications , 2017 .

[11]  Marco Frey,et al.  Comparison between hydrogen and electric vehicles by life cycle assessment: A case study in Tuscany, Italy , 2011 .

[12]  Christian Bauer,et al.  A life-cycle perspective on automotive fuel cells , 2015 .

[13]  Milan Simic,et al.  Investigation in Wireless Power Transmission for UAV Charging , 2015, KES.

[14]  M. Williams,et al.  Assessment of the Performance of Fuel Cells and Batteries , 2013 .

[15]  Sejin Kwon,et al.  Design and development of a fuel cell-powered small unmanned aircraft , 2012 .

[16]  Pierre Karrasch,et al.  Measuring gullies by synergetic application of UAV and close range photogrammetry - A case study from Andalusia, Spain , 2015 .

[17]  Surya P. N. Singh,et al.  Development of micro-UAV with integrated motion planning for open-cut mining surveillance , 2015, Microprocess. Microsystems.

[18]  Félix Barreras,et al.  Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission , 2016 .

[19]  Parvathy Rajendran,et al.  Implications of longitude and latitude on the size of solar-powered UAV , 2015 .

[20]  Daniel Garraín,et al.  Exploratory environmental impact assessment of the manufacturing and disposal stages of a new PEM fuel cell , 2014 .

[21]  Antonio Ficarella,et al.  A new approach to calculating endurance in electric flight and comparing fuel cells and batteries , 2017 .

[22]  Dimitri N. Mavris,et al.  Development and experimental characterization of a fuel cell powered aircraft , 2007 .

[23]  J. Fernández-Lozano,et al.  Improving archaeological prospection using localized UAVs assisted photogrammetry: An example from the Roman Gold District of the Eria River Valley (NW Spain) , 2016 .

[24]  Abdul Nishar,et al.  Thermal infrared imaging of geothermal environments and by an unmanned aerial vehicle (UAV): A case study of the Wairakei – Tauhara geothermal field, Taupo, New Zealand , 2016 .

[25]  Tan Chang,et al.  Improving Electric Powered UAVs’ Endurance by Incorporating Battery Dumping Concept , 2015 .

[26]  M. Pehnt.  Life-cycle assessment of fuel cell stacks , 2001 .

[27]  J. Flexas,et al.  UAVs challenge to assess water stress for sustainable agriculture , 2015 .

[28]  Hans-Jörg Althaus,et al.  The environmental performance of current and future passenger vehicles: Life cycle assessment based on a novel scenario analysis framework , 2015 .

[29]  Mariagiovanna Minutillo,et al.  Design methodology for a PEM fuel cell power system in a more electrical aircraft , 2017 .

[30]  Janko Petrovčič,et al.  A model-based approach to battery selection for truck onboard fuel cell-based APU in an anti-idling application , 2015 .