Formation and Development of Iridescent Rings Around Cavitation Erosion Pits
暂无分享,去创建一个
[1] S. Karrab,et al. Investigation of the Ring Area Formed Around Cavitation Erosion Pits on the Surface of Carbon Steel , 2012, Tribology Letters.
[2] Haosheng Chen. Iridescent rings around cavitation erosion pits on surface of mild carbon steel , 2010 .
[3] Wei Wang,et al. Pits with coloured halos formed on 1Cr18Ni9Ti stainless steel surface after ennoblement in seawater , 2009 .
[4] C. Haosheng,et al. A ring area formed around the erosion pit on 1Cr18Ni9Ti stainless steel surface in incipient cavitation erosion , 2009 .
[5] Chao-Chang A. Chen,et al. Form error analysis of mould insert for large angle lens with ICP algorithm , 2009 .
[6] C. Haosheng,et al. Thermal Effect at the Incipient Stage of Cavitation Erosion on a Stainless Steel in Ultrasonic Vibration Cavitation , 2009 .
[7] Wei-lin Xu,et al. A High-Speed Photographic Study of Ultrasonic Cavitation Near Rigid Boundary , 2008 .
[8] Wang Jia-dao,et al. Damages on steel surface at the incubation stage of the vibration cavitation erosion in water , 2008 .
[9] Jiang Li,et al. Affected zone generated around the erosion pit on carbon steel surface at the incipient stage of vibration cavitation , 2008 .
[10] J. Franc. Incubation Time and Cavitation Erosion Rate of Work-Hardening Materials , 2006 .
[11] T. Hodgkiess,et al. Erosion-corrosion behaviour of high-velocity oxy-fuel Ni-Cr-Mo-Si-B coatings under high-velocity seawater jet impingement , 2005 .
[12] M. Stack,et al. Modelling impact angle effects on erosion–corrosion of pure metals: Construction of materials performance maps , 2005 .
[13] N. Bourne,et al. The temperature of a shock-collapsed cavity , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.
[14] Brian D. Storey,et al. Heat and mass transfer during the violent collapse of nonspherical bubbles , 2003 .
[15] R. Wood,et al. Investigation of erosion–corrosion processes using electrochemical noise measurements , 2002 .
[16] Margaret Stack,et al. Some recent advances in the development of theoretical approaches for the construction of erosion-corrosion maps in aqueous conditions , 1999 .
[17] A. Neville,et al. Electrochemical and mechanical during erosion-corrosion of High-Velocity Oxy-Fuel (HVOF) coatings , 1999 .
[18] R. E. Trevisan,et al. An SEM-Based Method for the Evaluation of the Cavitation Erosion Behavior of Materials , 1998 .
[19] K. Hokkirigawa,et al. Scanning electron microscopy observation on the incubation period of vibratory cavitation erosion , 1991 .
[20] François Avellan,et al. Comparison of erosion mechanisms in different types of cavitation , 1986 .
[21] T. Misawa,et al. The mechanism of formation of iron oxide and oxyhydroxides in aqueous solutions at room temperature , 1974 .
[22] E. N. Harvey,et al. On Cavity Formation in Water , 1947 .