Heterostructures of Cut Carbon Nanotube-Filled Array of TiO2 Nanotubes for New Module of Photovoltaic Devices

In this work, a new photovoltaic device was prepared. The device uses titanium (Ti) foil/TiO2 nanotubes as the photoanode and multi-walled carbon nanotubes (MWCNTs) as a photosensitizer. Titanium dioxide nanotube arrays (TiO2-NTs) were prepared by one-step anodic oxidation. Cut-MWCNTs with a length of less than 100 nm were obtained by the mixed-acid oxidation of MWCNTs. The two materials were combined to form a TiO2-NTs@cut-MWCNT heterostructure by electrophoresis. TiO2-NTs@cut-MWCNTs were characterized by field-emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD), which showed that the two materials were effectively combined. We fabricated the heterostructure into a photovoltaic device, showing an enhanced photocurrent response and an efficiency of 0.0138%, and explained this phenomenon by performing UV-vis absorption spectroscopy and electrochemical tests. It is hoped that this work can provide a reference value for the application of carbon nanotubes in photovoltaic devices.

[1]  Claudia Barolo,et al.  Recent advances in eco-friendly and cost-effective materials towards sustainable dye-sensitized solar cells , 2020, Green Chemistry.

[2]  K. Popat,et al.  Synthesis of Eu-modified luminescent Titania nanotube arrays and effect of voltage on morphological, structural and spectroscopic properties , 2020 .

[3]  G. Tobias,et al.  Comparative study of shortening and cutting strategies of single-walled and multi-walled carbon nanotubes assessed by scanning electron microscopy , 2018, Carbon.

[4]  S. Aruna,et al.  Effect of metal oxide charge transfer layers on the photovoltaic performance of carbon nanotube heterojunction solar cells , 2018, Materials Letters.

[5]  A. Matsuda,et al.  TiO2 nanotube arrays formation in fluoride/ethylene glycol electrolyte containing LiOH or KOH as photoanode for dye-sensitized solar cell , 2017 .

[6]  Hongbing Zhan,et al.  Electrochemistry of partially unzipped carbon nanotubes , 2014 .

[7]  C. Zha,et al.  Double-sided brush-shaped TiO2 nanostructure assemblies with highly ordered nanowires for dye-sensitized solar cells. , 2014, ACS applied materials & interfaces.

[8]  N. Rajalakshmi.  Carbon Nanotubes and Graphene for Photonic Applications , 2013 .

[9]  Jiawei Gong,et al.  Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials , 2012 .

[10]  Xiaomin Li,et al.  Advantages of using Ti-mesh type electrodes for flexible dye-sensitized solar cells , 2012, Nanotechnology.

[11]  Zhang Lan,et al.  A Large‐Area Light‐Weight Dye‐Sensitized Solar Cell based on All Titanium Substrates with an Efficiency of 6.69% Outdoors , 2012, Advanced materials.

[12]  C. Hsieh,et al.  Graphite Oxide with Different Oxygenated Levels for Hydrogen and Oxygen Production from Water under Illumination: The Band Positions of Graphite Oxide , 2011 .

[13]  B. Delley,et al.  Light harvesting with multiwall carbon nanotube/silicon heterojunctions , 2011, Nanotechnology.

[14]  F. Rosei,et al.  Photocurrent generation in random networks of multiwall-carbon-nanotubes grown by an “all-laser” process , 2009 .

[15]  M. Venanzi,et al.  Photon harvesting with multi wall carbon nanotubes , 2009 .

[16]  S. Khondaker,et al.  Diffusion mediated photoconduction in multiwalled carbon nanotube films , 2009, 0904.4452.

[17]  Ji‐Guang Zhang,et al.  Self-assembled TiO2-graphene hybrid nanostructures for enhanced Li-ion insertion. , 2009, ACS nano.

[18]  M. Venanzi,et al.  Multiwall carbon nanotubes decorated with copper nanoparticles: Effect on the photocurrent response , 2009 .

[19]  G. Oskam,et al.  Phase-pure TiO2 nanoparticles: anatase, brookite and rutile , 2008, Nanotechnology.

[20]  M. Katsnelson,et al.  Modeling of graphite oxide. , 2008, Journal of the American Chemical Society.

[21]  Rakesh A. Afre,et al.  Cutting carbon nanotubes for solar cell application , 2008 .

[22]  Xiaosong Wu,et al.  Epitaxial-graphene/graphene-oxide junction: an essential step towards epitaxial graphene electronics. , 2007, Physical review letters.

[23]  Kang L. Wang,et al.  A chemical route to graphene for device applications. , 2007, Nano letters.

[24]  J. Macák,et al.  Filling of TiO2 Nanotubes by Self‐Doping and Electrodeposition , 2007 .

[25]  N. Lewis.  Toward Cost-Effective Solar Energy Use , 2007, Science.

[26]  F. Tombolini,et al.  Large photocurrent generation in multiwall carbon nanotubes , 2006 .

[27]  Jingdong Lin,et al.  MWNT-TiO2:Ni composite catalyst : A new class of catalyst for photocatalytic H2 evolution from water under visible light illumination , 2006 .

[28]  Mohammad Khaja Nazeeruddin,et al.  High-efficiency (7.2%) flexible dye-sensitized solar cells with Ti-metal substrate for nanocrystalline-TiO2 photoanode. , 2006, Chemical communications.

[29]  Craig A. Grimes,et al.  Backside illuminated dye-sensitized solar cells based on titania nanotube array electrodes , 2006 .

[30]  Wendong Wang,et al.  Visible light photodegradation of phenol on MWNT-TiO2 composite catalysts prepared by a modified sol–gel method , 2005 .

[31]  K. Matsushige,et al.  Chemical treatment and modification of multi-walled carbon nanotubes , 2002 .

[32]  Hongjie Dai,et al.  Carbon nanotubes: opportunities and challenges , 2002 .

[33]  Stanislaus S. Wong,et al.  Synthesis and Characterization of Carbon Nanotube−Nanocrystal Heterostructures , 2002 .

[34]  Craig A. Grimes,et al.  Titanium oxide nanotube arrays prepared by anodic oxidation , 2001 .

[35]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[36]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[37]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .

[38]  F. Wei,et al.  Characterization of single-wall carbon nanotubes by N2 adsorption , 2004 .

[39]  S. Martin,et al.  Environmental Applications of Semiconductor Photocatalysis , 1995 .