Laser-treated hydrophobic paper: an inexpensive microfluidic platform.

We report a method for fabricating inexpensive microfluidic platforms on paper using laser treatment. Any paper with a hydrophobic surface coating (e.g., parchment paper, wax paper, palette paper) can be used for this purpose. We were able to selectively modify the surface structure and property (hydrophobic to hydrophilic) of several such papers using a CO(2) laser. We created patterns down to a minimum feature size of 62±1 µm. The modified surface exhibited a highly porous structure which helped to trap/localize chemical and biological aqueous reagents for analysis. The treated surfaces were stable over time and were used to self-assemble arrays of aqueous droplets. Furthermore, we selectively deposited silica microparticles on patterned areas to allow lateral diffusion from one end of a channel to the other. Finally, we demonstrated the applicability of this platform to perform chemical reactions using luminol-based hemoglobin detection.

[1]  Bingcheng Lin,et al.  Rapid prototyping of paper‐based microfluidics with wax for low‐cost, portable bioassay , 2009, Electrophoresis.

[2]  S. Aguirre,et al.  Paper-based bioassays using gold nanoparticle colorimetric probes. , 2008, Analytical chemistry.

[3]  Emanuel Carrilho,et al.  Paper microzone plates. , 2009, Analytical chemistry.

[4]  G. Whitesides,et al.  Simple telemedicine for developing regions: camera phones and paper-based microfluidic devices for real-time, off-site diagnosis. , 2008, Analytical chemistry.

[5]  Junfei Tian,et al.  Paper-based microfluidic devices by plasma treatment. , 2008, Analytical chemistry.

[6]  G. Whitesides,et al.  Patterned paper as a platform for inexpensive, low-volume, portable bioassays. , 2007, Angewandte Chemie.

[7]  R. G. Albridge,et al.  Binding energy of the "2p" electrons of silicon in various compounds , 1970 .

[8]  Wei Shen,et al.  Fabrication of paper-based microfluidic sensors by printing. , 2010, Colloids and surfaces. B, Biointerfaces.

[9]  George M Whitesides,et al.  FLASH: a rapid method for prototyping paper-based microfluidic devices. , 2008, Lab on a chip.

[10]  B. Lin,et al.  Fabrication and characterization of paper-based microfluidics prepared in nitrocellulose membrane by wax printing. , 2010, Analytical chemistry.

[11]  G. Whitesides,et al.  Low-cost printing of poly(dimethylsiloxane) barriers to define microchannels in paper. , 2008, Analytical chemistry.

[12]  G. Whitesides,et al.  Understanding wax printing: a simple micropatterning process for paper-based microfluidics. , 2009, Analytical chemistry.

[13]  Weian Zhao,et al.  Lab on paper. , 2008, Lab on a chip.

[14]  G. Whitesides,et al.  Three-dimensional microfluidic devices fabricated in layered paper and tape , 2008, Proceedings of the National Academy of Sciences.

[15]  D. Citterio,et al.  Inkjet-printed microfluidic multianalyte chemical sensing paper. , 2008, Analytical chemistry.