Piezo-Polymer-Composite Unimorph Actuators for Active Cancellation of Flow Instabilities Across Airfoils

This article presents a smart device for active cancellation of flow instabilities. An array of two piezo unimorph actuators fabricated in piezo-polymer-composite technology is combined with a thin silicone membrane to mimic a movable wall with a closed surface. By locally displacing the thin membrane, a surface wave is generated that interferes with naturally occurring flow instabilities within the boundary layer of an airfoil. Using flow sensors and an intelligent control enables a destructive interference and therefore, an attenuation of natural flow instabilities. This leads to a delay of transition. The boundary layer remains laminar which means drag is reduced. Within the next pages, the setup of the device with actuators, membrane, sensors, and control is introduced. The main focus of this article is on actuator design, modeling, and implementation for wind tunnel experiments. Results of actuator characterization are presented. The non-linear behavior of the piezoactuator (harmonic distortions and impact of high electric fields) is investigated in detail. This study concludes with the results obtained in wind tunnel experiments which prove the functionality of the presented approach. A maximal attenuation of natural occurring flow instabilities of 80% is achieved.

[1]  Andrew S. W. Thomas.  The control of boundary-layer transition using a wave-superposition principle , 1983, Journal of Fluid Mechanics.

[2]  L. E. Cross,et al.  Nonlinear piezoelectric behavior of ceramic bending mode actuators under strong electric fields , 1999 .

[3]  Changhoon Lee,et al.  Control of the viscous sublayer for drag reduction , 2002 .

[4]  L. Yao,et al.  Nonlinear static characteristics of piezoelectric bending actuators under strong applied electric field , 2004 .

[5]  B. Houston,et al.  Modeling and measurement of nonlinear dynamic behavior in piezoelectric ceramics with application to 1-3 composites , 1998 .

[6]  Scott D Snyder.  Active Noise Control Primer , 2000 .

[7]  Yury S. Kachanov,et al.  PHYSICAL MECHANISMS OF LAMINAR-BOUNDARY-LAYER TRANSITION , 1994 .

[8]  R. E. Rossi,et al.  Vibration frequencies for a uniform beam with one end spring-hinged and subjected to a translational restraint at the other end , 1976 .

[9]  Cameron Tropea,et al.  Active cancellation of artificially introduced Tollmien–Schlichting waves using plasma actuators , 2008 .

[10]  K. Uchino,et al.  The "cymbal" electromechanical actuator , 1996, ISAF '96. Proceedings of the Tenth IEEE International Symposium on Applications of Ferroelectrics.

[11]  Wolfgang Nitsche,et al.  Model Predictive Flow Control - Invited Paper - , 2008 .

[12]  S. Joshi.  Non-linear constitutive relations for piezoceramic materials , 1992 .

[13]  L. Yao,et al.  Nonlinear dynamic characteristics of piezoelectric bending actuators under strong applied electric field , 2004, Journal of Microelectromechanical Systems.

[14]  John Kim,et al.  Turbulent boundary layer control utilizing the Lorentz force , 2000 .

[15]  F. Laadhari,et al.  Turbulence reduction in a boundary layer by a local spanwise oscillating surface , 1994 .

[16]  J. Hempel,et al.  A piezo-actuated closed loop MEMS system for active delay of transition , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[17]  W. Nitsche,et al.  In-flight experiments for delaying laminar—turbulent transition on a laminar wing glove , 2009 .

[18]  W. Nitsche,et al.  Active cancellation of Tollmien–Schlichting instabilities on a wing using multi-channel sensor actuator systems , 2003 .

[19]  P. Woias,et al.  Assessing the elastostriction and the electrostriction parameter of bulk PZT ceramics , 2010 .

[20]  Wolfgang Nitsche,et al.  The surface hot wire as a means of measuring mean and fluctuating wall shear stress , 2001 .