Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

The polypropylene (PP)/wood flour (WF) composites were prepared using a co-rotating twin-screw extruder followed by a single-screw extruder foaming system in this paper. Polymers, such as polyolefin elastomer (POE), high-density polyethylene (HDPE) or microcrystalline wax, were blended with PP in the preparation of composites to improve the melt strength. And a cavity transfer mixer was introduced to increase the distribution uniformity of components in composites. Meanwhile, the effect of the polymer blends on the microstructure and mechanical properties of samples was investigated. The experimental results show that the addition of POE and HDPE resulted in the second melting peak in the differential scanning calorimeter (DSC) curves and a great decrease in the cell size was caused by the added POE. However, due to the velocity difference of composites in the die, the shape of bubbles gradually became irregular. Moreover, the impact strength of samples significantly increased by 85% for the added POE and the apparent density decreased by 6.7%. And the minimum Vicat softening temperature of 133.7 °C was obtained when the mass ratio of HDPE to PP was 4/6.

[1]  Xu Wu,et al.  Cell structure of microcellular combustible object foamed by supercritical carbon dioxide , 2019, Defence Technology.

[2]  Blanca S. Pascual,et al.  Microcellular foamed aromatic polyamides (aramids). Structure, thermal and mechanical properties , 2019, European Polymer Journal.

[3]  M.A. Hulsen,et al.  Mixing processes in the cavity transfer mixer: a thorough study , 2018 .

[4]  Xiangfang Peng,et al.  Fabrication and mechanism of poly(butylene succinate) urethane ionomer microcellular foams with high thermal insulation and compressive feature , 2018 .

[5]  B. Du,et al.  Effect of elastomer type on electrical and mechanical properties of polypropylene/elastomer blends , 2017, 2017 International Symposium on Electrical Insulating Materials (ISEIM).

[6]  B. Du,et al.  Effects of mechanical stretching on space charge behaviors of PP/POE blend for HVDC cables , 2017, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  W. Gong,et al.  Application of a novel organic nucleating agent: Cucurbit[6]uril to improve polypropylene injection foaming behavior and their physical properties , 2017 .

[8]  M. Jia,et al.  The property of polycarbonate/acrylonitrile butadiene styrene‐based conductive composites filled by nickel‐coated carbon fiber and nickel–graphite powder , 2017 .

[9]  Linsheng Xie,et al.  Extrusion foaming behavior of a polypropylene/nanoclay microcellular foam , 2016 .

[10]  Jian Wang,et al.  Microcellular polypropylene single-polymer composites prepared by insert-microcellular injection molding , 2016 .

[11]  G. Hu,et al.  Preparation of open-cell polymer foams by CO2 assisted foaming of polymer blends , 2016 .

[12]  L. Xiaohu,et al.  Solid-state foaming of isotactic polypropylene and its composites with spherical or fibrous poly(butylenes terephthalate) , 2015 .

[13]  Chul B. Park,et al.  Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors , 2015 .

[14]  Chul B. Park,et al.  Superhydrophobic and oleophilic open-cell foams from fibrillar blends of polypropylene and polytetrafluoroethylene. , 2014, ACS applied materials & interfaces.

[15]  P. U. Jung.  Development of Innovative Gas-assisted Foam Injection Molding Technology , 2014 .

[16]  Chul B. Park,et al.  In situ fibrillation of CO2-philic polymers: Sustainable route to polymer foams in a continuous process , 2013 .

[17]  Ali Shalbafan,et al.  Investigation of Foam Materials to be Used in Lightweight Wood Based Composites , 2013 .

[18]  A. Salimi.  Characterization of nano scale adhesion at solid surface of oxidized PP wax/PP blends , 2012 .

[19]  N. Petchwattana,et al.  Influences of particle sizes and contents of chemical blowing agents on foaming wood plastic composites prepared from poly(vinyl chloride) and rice hull , 2011 .

[20]  C. Atas,et al.  On the impact response of sandwich composites with cores of balsa wood and PVC foam , 2010 .

[21]  Hu Guo-sheng.  Isothermal Crystallization Behavior of In-Situ Crosslinking Modified PP/POE Composites , 2010 .

[22]  W. Yuan,et al.  Effects of crystal structure on the foaming of isotactic polypropylene using supercritical carbon dioxide as a foaming agent , 2009 .

[23]  H. Sheu,et al.  Fabrication and characterization of polyamide 6,6/organo-montmorillonite nanocomposites with and without a maleated polyolefin elastomer as a toughener , 2008 .

[24]  Xiangfang Peng,et al.  Microcellular foaming of PE/PP blends , 2007 .

[25]  B. Riedl,et al.  Preparation and morphology of polypropylene/wood flour composite foams via extrusion , 2005 .

[26]  S. Selke,et al.  CHARACTERIZATION OF MICROCELLULAR FOAMED POLYOLEFIN BLEND COMPOSITES WITH WOOD FIBER , 2004 .

[27]  Smita Mohanty,et al.  Effect of MAPP as a Coupling Agent on the Performance of Jute–PP Composites , 2004 .

[28]  Jinhai Yang,et al.  Brittle–ductile transition of PP/POE blends in both impact and high speed tensile tests , 2003 .

[29]  S. Selke,et al.  Microcellular foam of polymer blends of HDPE/PP and their composites with wood fiber , 2003 .

[30]  A. D. Souza,et al.  Influence of composition on the linear viscoelastic behavior and morphology of PP/HDPE blends , 2002 .

[31]  Carmen Albano,et al.  Polypropylene/wood flour composites: treatments and properties , 2001 .

[32]  D. F. Caulfield,et al.  Effect of compatibilizer on the structure-property relationships of kenaf-fiber/polypropylene composites , 2001 .

[33]  Q. Fu,et al.  Polyethylene toughened by rigid inorganic particles , 1992 .