Identify the best glass forming ability criterion

[1]  M. Ferry,et al.  Influence of Casting Parameters on the Critical Casting Size of Bulk Metallic Glass , 2009 .

[2]  Jianfei Sun,et al.  Critical cooling rate and thermal stability for a Ti–Zr–Ni–Cu–Be metallic glass , 2009 .

[3]  A. Inoue,et al.  On the new criterion to assess the glass-forming ability of metallic alloys , 2009 .

[4]  A. Inoue,et al.  A new criterion for predicting the glass-forming ability of bulk metallic glasses , 2009 .

[5]  E. Ma,et al.  High glass-forming ability correlated with fragility of Mg–Cu(Ag)–Gd alloys , 2007 .

[6]  O. Senkov.  Correlation between fragility and glass-forming ability of metallic alloys , 2007 .

[7]  H. Bei,et al.  Recent progress in quantifying glass-forming ability of bulk metallic glasses , 2007 .

[8]  E. Ma,et al.  Modified efficient cluster packing model for calculating alloy compositions with high glass forming ability , 2007 .

[9]  Jun Shen,et al.  Binary eutectic clusters and glass formation in ideal glass-forming liquids , 2006 .

[10]  A. Inoue,et al.  Pd30Pt17.5Cu32.5P20 alloy with low critical cooling rate of 0.067K∕s , 2006 .

[11]  T. Shen,et al.  Lowering critical cooling rate for forming bulk metallic glass , 2006 .

[12]  H. Fan,et al.  Critical cooling rate and thermal stability of Fe–Co–Zr–Y–Cr–Mo–B amorphous alloy , 2006 .

[13]  Edgar Dutra Zanotto,et al.  Can glass stability parameters infer glass forming ability , 2005 .

[14]  G. Wang,et al.  Exceptionally high glass-forming ability of an FeCoCrMoCBY alloy , 2005 .

[15]  J. Schroers,et al.  Influence of Kinetic and Thermodynamic Factors on the Glass-Forming Ability of Zirconium-Based Bulk Amorphous Alloys , 2005 .

[16]  W. Johnson,et al.  Noncontact measurement of crystallization behavior, specific volume, and viscosity of bulk glass-forming Zr-Al-Co-(Cu) alloys , 2004 .

[17]  D. Miracle,et al.  A structural model for metallic glasses , 2004, Microscopy and Microanalysis.

[18]  J. F. Löffler,et al.  Thermodynamics, enthalpy relaxation and fragility of the bulk metallic glass-forming liquid Pd43Ni10Cu27P20 , 2004 .

[19]  Do Hyang Kim,et al.  Fabrication and Mechanical Properties of Mg65Cu15Ag5Pd5Gd10 Bulk Metallic Glass , 2003 .

[20]  Z. Lu,et al.  Glass formation criterion for various glass-forming systems. , 2003, Physical review letters.

[21]  D. Kim,et al.  Fabrication of ternary Mg–Cu–Gd bulk metallic glass with high glass-forming ability under air atmosphere , 2003 .

[22]  A. Inoue,et al.  Direct Comparison between Critical Cooling Rate and Some Quantitative Parameters for Evaluation of Glass-Forming Ability in Pd-Cu-Ni-P Alloys , 2002 .

[23]  J. R. Rogers,et al.  Vitrification and determination of the crystallization time scales of the bulk-metallic-glass-forming liquid Zr58.5Nb2.8Cu15.6Ni12.8Al10.3 , 2001 .

[24]  Yat Li,et al.  Glass Forming Ability of La-rich La-Al-Cu Ternary Alloys , 2001 .

[25]  J. Schroers,et al.  Critical cooling rate and thermal stability of Zr–Ti–Cu–Ni–Be alloys , 2001 .

[26]  J. Schroers,et al.  Crystallization kinetics of the bulk-glass-forming Pd43Ni10Cu27P20 melt , 2000 .

[27]  Yat Li,et al.  Reduced glass transition temperature and glass forming ability of bulk glass forming alloys , 2000 .

[28]  Zhaoping Lu,et al.  The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses , 2000 .

[29]  W. Johnson,et al.  Thermodynamics of Cu47Ti34Zr11Ni8, Zr52.5Cu17.9Ni14.6Al10Ti5 and Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloys , 2000 .

[30]  Yat Li,et al.  Glass formation in La-based La-Al-Ni-Cu-(Co) alloys by Bridgman solidification and their glass forming ability , 1999 .

[31]  W. Liu,et al.  Thermodynamics and kinetics of the Mg 65 Cu 25 Y 10 bulk metallic glass forming liquid , 1998 .

[32]  Yat Li,et al.  Easy glass formation in La55Ni20Al25 by Bridgman solidification , 1998 .

[33]  A. Inoue,et al.  Preparation and thermal stability of bulk amorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter , 1997 .

[34]  H. Hng,et al.  Critical cooling rates for glass formation in ZrAlCuNi alloys , 1996 .

[35]  H. Jones,et al.  Easy glass formation in magnesium-based Mg-Ni-Nd alloys , 1996, Journal of Materials Science.

[36]  W. Johnson,et al.  Formation of Ti–Zr–Cu–Ni bulk metallic glasses , 1995 .

[37]  Edgar Dutra Zanotto,et al.  “Nose Method” of Calculating Critical Cooling Rates for Glass Formation , 1989 .

[38]  D. Day,et al.  Glass formation and properties in the gallia-calcia system , 1984 .

[39]  Jose Manuel Barandiaran,et al.  Continuous cooling approximation for the formation of a glass , 1981 .

[40]  R. Ray,et al.  Metallic glass formation and properties in Zr and Ti alloyed with Be—I the binary Zr-Be and Ti-Be systems☆ , 1979 .

[41]  D. Uhlmann,et al.  Nucleating heterogeneities and glass formation , 1976 .

[42]  H. Davies,et al.  The stabilities and kinetics of formation of glassy palladiumsilicon phases in the composition range 5 – 25 At.% Si , 1976 .

[43]  D. Turnbull,et al.  Formation, stability and structure of palladium-silicon based alloy glasses , 1969 .

[44]  P. Duwez,et al.  Non-crystalline Structure in Solidified Gold–Silicon Alloys , 1960, Nature.

[45]  Michael K Miller,et al.  Bulk Metallic Glasses : an overview , 2008 .

[46]  G. J. Fan,et al.  A new criterion for the glass-forming ability of liquids , 2007 .

[47]  C. Liu,et al.  A new glass-forming ability criterion for bulk metallic glasses , 2002 .

[48]  A. Inoue.  Stabilization of metallic supercooled liquid and bulk amorphous alloys , 2000 .

[49]  A. Paxton,et al.  HIGH PURITY SILICON VI , 2000 .

[50]  A. Inoue,et al.  Preparation of 16 mm Diameter Rod of Amorphous Zr65Al7.5Ni10Cu17.5 Alloy , 1993 .

[51]  C. Suryanarayana,et al.  Rapidly Quenched Metals , 1980 .

[52]  H. Davies,et al.  Metallic glasses and the avoidance of crystallization in metallic melts , 1976 .