Applying the logistic regression in electrical impedance tomography to analyze conductivity of the examined objects

The article presents machine learning methods in the field of reconstruction of tomographic images. The presented research results show that electric tomography makes it possible to analyze objects without interfering with them. The work focused mainly on electrical impedance tomography and image reconstruction using deterministic methods and machine learning, reconstruction results were compared and various numerical models were used. The main advantage of the presented solution is the ability to analyze spatial data and high speed of processing. The implemented algorithm based on logistic regression is promising in image reconstruction. In addition, the elastic net method was used to solve the problem of selecting input variables in the regression model.

[1]  Andrzej Krawczyk,et al.  Magnetofosfeny - historia i współczesne implikacje , 2018 .

[2]  Przemyslaw Lopato,et al.  A Circular Microstrip Antenna Sensor for Direction Sensitive Strain Evaluation † , 2018, Sensors.

[3]  Tomasz Rymarczyk,et al.  Increasing the Reliability of Flood Embankments with Neural Imaging Method , 2018, Applied Sciences.

[4]  Antoni Świć,et al.  Maintenance of industrial reactors supported by deep learning driven ultrasound tomography , 2019 .

[5]  Dariusz Mazurkiewicz.  Maintenance of belt conveyors using an expert system based on fuzzy logic , 2015 .

[6]  Trevor Hastie,et al.  Regularization Paths for Generalized Linear Models via Coordinate Descent. , 2010, Journal of statistical software.

[7]  H. Zou,et al.  Regularization and variable selection via the elastic net , 2005 .

[8]  Manuchehr Soleimani,et al.  Planar array 3D electrical capacitive tomography , 2013 .

[9]  Przemyslaw Lopato,et al.  Full wave numerical modelling of terahertz systems for nondestructive evaluation of dielectric structures , 2013 .

[10]  William R B Lionheart,et al.  Uses and abuses of EIDORS: an extensible software base for EIT , 2006, Physiological measurement.

[11]  Arkadiusz Gola,et al.  Integer Linear Programming in Optimization of Waste After Cutting in the Furniture Manufacturing , 2017 .

[12]  Jacek Kryszyn,et al.  Switchless charge-discharge circuit for electrical capacitance tomography , 2014 .

[13]  Andrzej Romanowski.  Contextual Processing of Electrical Capacitance Tomography Measurement Data for Temporal Modeling of Pneumatic Conveying Process , 2018, 2018 Federated Conference on Computer Science and Information Systems (FedCSIS).

[14]  S. Osher,et al.  Level set methods: an overview and some recent results , 2001 .

[15]  Pavel Fiala,et al.  Numerical Modeling of Magnetic Field Deformation as Related to Susceptibility Measured with an MR System , 2008 .

[16]  Jan Mikulka,et al.  GPU-Accelerated Reconstruction of T2 Maps in Magnetic Resonance Imaging , 2015 .

[17]  R. Tibshirani.  Regression Shrinkage and Selection via the Lasso , 1996 .

[18]  Dariusz Mazurkiewicz,et al.  Assessment model of cutting tool condition for real-time supervision system , 2019, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

[19]  Hao Chen,et al.  Standard Plane Localization in Fetal Ultrasound via Domain Transferred Deep Neural Networks , 2015, IEEE Journal of Biomedical and Health Informatics.

[20]  Lidia Jackowska-Strumiłło,et al.  Acceleration of image reconstruction process in the electrical capacitance tomography 3D in heterogeneous, Multi-GPU system , 2017 .

[21]  R. Wehrens.  Chemometrics with R , 2020, Use R!.

[22]  Anna Hoła,et al.  A non-destructive method of the evaluation of the moisture in saline brick walls using artificial neural networks , 2018 .

[23]  Tomasz Rymarczyk,et al.  New electrical tomographic method to determine dampness in historical buildings , 2016 .

[24]  David Valis,et al.  Application of selected Levy processes for degradation modelling of long range mine belt using real-time data , 2018 .

[25]  Robert Banasiak,et al.  Metrological evaluation of a 3D electrical capacitance tomography measurement system for two-phase flow fraction determination , 2013 .

[26]  Tomasz Rymarczyk,et al.  New methods to determine moisture areas by electrical impedance tomography , 2016 .

[27]  Tomasz Rymarczyk,et al.  Logistic Regression for Machine Learning in Process Tomography , 2019, Sensors.

[28]  Manuchehr Soleimani,et al.  A Quantitative Ultrasonic Travel-Time Tomography to Investigate Liquid Elaborations in Industrial Processes , 2019, Italian National Conference on Sensors.

[29]  Jacek Kryszyn,et al.  Toolbox for 3D modelling and image reconstruction in electrical capacitance tomography , 2017 .

[30]  Marcin Ziolkowski,et al.  Analytical and numerical models of the magnetoacoustic tomography with magnetic induction , 2018 .

[31]  Tom Fawcett,et al.  An introduction to ROC analysis , 2006, Pattern Recognit. Lett..

[32]  Grzegorz Psuj.  Multi-Sensor Data Integration Using Deep Learning for Characterization of Defects in Steel Elements † , 2018, Sensors.

[33]  T. Rymarczyk,et al.  Innovative methods of neural reconstruction for tomographic images in maintenance of tank industrial reactors , 2019, Ekspolatacja i Niezawodnosc - Maintenance and Reliability.

[34]  Tomasz Rymarczyk,et al.  Comparison of Selected Machine Learning Algorithms for Industrial Electrical Tomography , 2019, Sensors.

[35]  Andrzej Romanowski,et al.  Big Data-Driven Contextual Processing Methods for Electrical Capacitance Tomography , 2019, IEEE Transactions on Industrial Informatics.

[36]  Jacek Kryszyn,et al.  METHODS OF SMALL CAPACITANCE MEASUREMENT IN ELECTRICAL CAPACITANCE TOMOGRAPHY , 2017 .

[37]  Phyo Phyo San,et al.  Non-invasive hypoglycemia monitoring system using extreme learning machine for Type 1 diabetes. , 2016, ISA transactions.

[38]  A. Wood,et al.  Report of the Editors—2004 , 2005 .