Quality improvement of chemical-mechanical wafer planarization process in semiconductor manufacturing using a combined generalized linear modelling - non-linear programming approach

This paper is aimed at how to develop and utilize a specialized response surface method, combined with state-of-the-art mathematical programming techniques, for quality improvements of the chemical-mechanical planarization (CMP) process in semiconductor manufacturing. CMP is one of the fastest growing technologies that enables to polish the topography of interlayer dielectrics (ILDs) and to obtain a high degree of global planarity due to increasingly stringent requirements of photolithography between process steps. A wafer held on a carrier is rotated against a polishing pad in the presence of a silica-based alkaline slurry while applying a down-force onto it. Two major challenging works posed by CMP involve maintaining stable removal rate with polishing time and achieving acceptable within-wafer non-uniformity (WIWNU) over an entire die. In this research, to robustly characterize and therefore optimize such a still unclear and fully complex process, the response surface methodology (RSM) as an external modelling technique and non-linear programming (NLP) approaches as an optimum-seeking procedure are proposed to the bicriteria situation. An example with real CMP data is rigorously investigated, revealing that not only does the proposed method flexibly and appropriately portray CMP, but also helps locate the optimal parameter settings that attain better polishing quality.

[1]  Jinn-Yi Yeh,et al.  An adaptive run-to-run optimizing controller for linear and nonlinear semiconductor processes , 1998, ICMTS 1998.

[2]  M. Fury.  Emerging developments in CMP for semiconductor planarization , 1995 .

[3]  K. Taraman,et al.  Multi machining output—multi independent variable turning research by response surface methodology , 1974 .

[4]  Douglas C. Montgomery,et al.  A response surface approach to improving traffic signal settings in a street network , 1972 .

[5]  Enrique Del Castillo,et al.  THE COMPUTATION OF GLOBAL OPTIMA IN DUAL RESPONSE SYSTEMS , 1997 .

[6]  Douglas C. Montgomery,et al.  Development of a TiW plasma etch process using a mixture experiment and response surface optimization , 1996 .

[7]  R. H. Myers,et al.  Response Surface Techniques for Dual Response Systems , 1973 .

[8]  R. E. Jones,et al.  Use of screening and response surface experimental designs for development of a 0.5- mu m CMOS self-aligned titanium silicide process , 1991 .

[9]  A. Khuri,et al.  Simultaneous Optimization of Multiple Responses Represented by Polynomial Regression Functions , 1981 .

[10]  Peter Henry Renteln,et al.  Characterization of mechanical planarization processes , 1990, Seventh International IEEE Conference on VLSI Multilevel Interconnection.

[11]  Michael A. Saunders,et al.  A projected Lagrangian algorithm and its implementation for sparse nonlinear constraints , 1982 .

[12]  Jorge J. Moré,et al.  Computing a Trust Region Step , 1983 .

[13]  Enrique del Castillo,et al.  Optimization of dual response systems: A comprehensive procedure for degenerate and nondegenerate problems , 1999, Eur. J. Oper. Res..

[14]  H. Lifka,et al.  Chemical Mechanical Polishing for Planarisation of Advanced IC Processes , 1993, ESSDERC '93: 23rd European solid State Device Research Conference.

[15]  C. Daniel.  Use of Half-Normal Plots in Interpreting Factorial Two-Level Experiments , 1959 .

[16]  R. Kolenkow,et al.  CHEMICAL-MECHANICAL WAFER POLISHING AND PLANARIZATION IN BATCH SYSTEMS , 1992 .

[17]  G. Nanz,et al.  Modeling of chemical-mechanical polishing: a review , 1995 .

[18]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[19]  Duane S. Boning,et al.  DOE/Opt: a system for design of experiments, response surface modeling, and optimization using process and device simulation , 1994 .

[20]  Pandu R. Tadikamalla,et al.  Multicriteria design and control of a cellular manufacturing system through simulation and optimization , 1998 .

[21]  I. Ali,et al.  Chemical-mechanical polishing of interlayer dielectric: a review , 1994 .

[22]  A. Zellner.  An Efficient Method of Estimating Seemingly Unrelated Regressions and Tests for Aggregation Bias , 1962 .

[23]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[24]  Anthony J. Walton,et al.  The integration of simulation and response surface methodology for the optimization of IC processes , 1994 .

[25]  Charles L. Standley,et al.  Application of Chemical Mechanical Polishing to the Fabrication of VLSI Circuit Interconnections , 1991 .

[26]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .