MR compatible continuum robot based on closed elastica with bending and twisting

In this paper, we propose a novel continuum robot based on closed loop elastic structure with bending and twisting. The proposed continuum robot consists of an elastic tube and a closed loop arm completely independent from the tube. The closed loop arm is a simple thin belt-shaped elastic strip which has two translational joints and one rotary degree of freedom. Here we found that when the closed loop arm was inside the tube and the one side of the translational joint was pushed or pulled, the tube could be bent easily. Based on this basic result, we proposed three types of the closed loop arm shape using bending and twisting of the elastic strip and showed that these arms made the tube deformed into completely different shapes including 180 degrees of rotation. The proposed mechanism was applied to two prototypes. One of them is the magnet resonance compatible manipulator which consists of the β titanium pipe of outer radius of 3 mm and the wall thickness of 0.2 mm and the polyetheretherketone resin elastic strip.

[1]  R. J. Black,et al.  Real-Time Estimation of 3-D Needle Shape and Deflection for MRI-Guided Interventions , 2010, IEEE/ASME Transactions on Mechatronics.

[2]  Robert J. Webster,et al.  Toward Active Cannulas: Miniature Snake-Like Surgical Robots , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Pierre E. Dupont,et al.  Inverse Kinematics of Concentric Tube Steerable Needles , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[4]  D. Caleb Rucker,et al.  Parsimonious Evaluation of Concentric-Tube Continuum Robot Equilibrium Conformation , 2009, IEEE Transactions on Biomedical Engineering.

[5]  Adam Morecki,et al.  Elephant trunk type elastic manipulator - a tool for bulk and liquid materials transportation , 1999, Robotica.

[6]  Guy Immega,et al.  The KSI tentacle manipulator , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[7]  Hiromi Mochiyama,et al.  An asymmetric robotic catapult based on the closed elastica for jumping robot , 2008, 2008 IEEE International Conference on Robotics and Automation.

[8]  Ian D. Walker,et al.  Kinematics for multisection continuum robots , 2006, IEEE Transactions on Robotics.

[9]  Robert J. Webster,et al.  Design and Kinematic Modeling of Constant Curvature Continuum Robots: A Review , 2010, Int. J. Robotics Res..

[10]  Robert J. Webster,et al.  Mechanics of Precurved-Tube Continuum Robots , 2009, IEEE Transactions on Robotics.

[11]  John Kenneth Salisbury,et al.  Mechanics Modeling of Tendon-Driven Continuum Manipulators , 2008, IEEE Transactions on Robotics.

[12]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[13]  Robert J. Webster,et al.  Design and mechanics of continuum robots for surgery , 2008 .

[14]  Ian D. Walker,et al.  Kinematics and the Implementation of an Elephant's Trunk Manipulator and Other Continuum Style Robots , 2003, J. Field Robotics.

[15]  Hiromi Mochiyama,et al.  Kinematics and statics of robotic catapults based on the closed elastica , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Kyle B. Reed,et al.  Mechanics of Flexible Needles Robotically Steered through Soft Tissue , 2010, Int. J. Robotics Res..

[17]  Pierre E. Dupont,et al.  A Steerable Needle Technology Using Curved Concentric Tubes , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[18]  Mark R. Cutkosky,et al.  An optical actuation system and curvature sensor for a MR-compatible active needle , 2012, 2012 IEEE International Conference on Robotics and Automation.