Multi-objective efficiency enhancement using workload spreading in an operational data center

The cooling systems of rapidly growing Data Centers (DCs) consume a considerable amount of energy, which is one of the main concerns in designing and operating DCs. The main source of thermal inefficiency in a typical air-cooled DC is hot air recirculation from outlets of servers into their inlets, causing hot spots and leading to performance reduction of the cooling system. In this study, a thermally aware workload spreading method is proposed for reducing the hot spots while the total allocated server workload is increased. The core of this methodology lies in developing an appropriate thermal DC model for the optimization process. Given the fact that utilizing a high-fidelity thermal model of a DC is highly time consuming in the optimization process, a three dimensional reduced order model of a real DC is developed in this study. This model, whose boundary conditions are determined based on measurement data of an operational DC, is developed based on the potential flow theory updated with the Rankine vortex to account for buoyancy and air recirculation effects inside the DC. Before evaluating the proposed method, this model is verified with a computational fluid dynamic (CFD) model simulated with the same boundary conditions. The efficient load spreading method is achieved by applying a multi-objective particle swarm optimization (MOPSO) algorithm whose objectives are to minimize the hot spot occurrences and to maximize the total workload allocated to servers. In this case study, by applying the proposed method, the Coefficient of Performance (COP) of the cooling system is increased by 17%, and the total allocated workload is increased by 10%. These results demonstrate the effectiveness of the proposed method for energy efficiency enhancement of DCs.

[1]  Richard E. Brown,et al.  Report to Congress on Server and Data Center Energy Efficiency: Public Law 109-431 , 2008 .

[2]  J. Rambo,et al.  Reduced-Order Modeling of Multiscale Turbulent Convection: Application to Data Center Thermal Management , 2006 .

[3]  Saman K. Halgamuge,et al.  Minimizing the thermal impact of computing equipment upgrades in data centers , 2012 .

[4]  A. Khalaj,et al.  Modeling of heat transfer enhancement by wire coil inserts using artificial neural network analysis , 2010 .

[5]  Ayan Banerjee,et al.  Spatio-temporal thermal-aware job scheduling to minimize energy consumption in virtualized heterogeneous data centers , 2009, Comput. Networks.

[6]  Jeffrey Rambo,et al.  Modeling of data center airflow and heat transfer: State of the art and future trends , 2007, Distributed and Parallel Databases.

[7]  Amip J. Shah,et al.  Computational and Experimental Validation of a Vortex-Superposition-Based Buoyancy Approximation for the COMPACT Code in Data Centers , 2013 .

[8]  M. N. Vrahatis,et al.  Particle swarm optimization method in multiobjective problems , 2002, SAC '02.

[9]  Hoseyn Sayyaadi,et al.  THERMO-HYDRAULIC BEHAVIOR MODELING OF PASSIVE HEAT TRANSFER ENHANCEMENT TECHNIQUES USING A SOFT COMPUTING APPROACH , 2014 .

[10]  S. Gupta,et al.  Thermal-aware task scheduling for data centers through minimizing heat recirculation , 2007, 2007 IEEE International Conference on Cluster Computing.

[11]  Karsten Schwan,et al.  CoolIT: coordinating facility and it management for efficient datacenters , 2008, CLUSTER 2008.

[12]  Madhusudan K. Iyengar,et al.  Reduced Order Thermal Modeling of Data Centers via Distributed Sensor Data , 2012 .

[13]  Ali Habibi Khalaj,et al.  Heat Transfer Coefficient and Friction Factor Prediction of Corrugated Tubes Combined With Twisted Tape Inserts Using Artificial Neural Network , 2010 .

[14]  David Joseph Lettieri.  Expeditious Data Center Sustainability, Flow, and Temperature Modeling: Life-Cycle Exergy Consumption Combined with a Potential Flow Based, Rankine Vortex Superposed, Predictive Method , 2012 .

[15]  Michael M. Ohadi,et al.  Optimum Cooling of Data Centers , 2014 .

[16]  Yogendra Joshi,et al.  Energy Efficient Thermal Management of Data Centers , 2012 .

[17]  Saman K. Halgamuge,et al.  Potential of air-side economizers for data center cooling: A case study for key Australian cities , 2013 .

[18]  Jacqueline Moore,et al.  Multiobjective particle swarm optimization , 2000, ACM-SE 38.

[19]  Qinghui Tang,et al.  Sensor-Based Fast Thermal Evaluation Model For Energy Efficient High-Performance Datacenters , 2006, 2006 Fourth International Conference on Intelligent Sensing and Information Processing.

[20]  Van P. Carey,et al.  Experimental Validation of the COMPACT Code in Data Centers , 2010 .

[21]  Van P. Carey,et al.  Exploration of a Potential-Flow-Based Compact Model of Air-Flow Transport in Data Centers , 2009 .

[22]  Yogendra Joshi,et al.  Proper Orthogonal Decomposition for Reduced Order Thermal Modeling of Air Cooled Data Centers , 2010 .

[23]  M. M. Toulouse,et al.  Evaluation of a vortex model of buoyancy-driven recirculation in potential flow analysis of data center performance , 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[24]  S. Patankar.  Airflow and Cooling in a Data Center , 2010 .

[25]  Tapabrata Ray,et al.  A Swarm Metaphor for Multiobjective Design Optimization , 2002 .

[26]  Yogendra Joshi,et al.  Multi-parameter model reduction in multi-scale convective systems , 2010 .

[27]  Bahgat Sammakia,et al.  Data Center Cooling Prediction Using Artificial Neural Network , 2007 .

[28]  Jayantha Senarath Siriwardana Atalelage.  Energy efficiency enhancement and optimisation for data centres , 2012 .

[29]  Carlos A. Coello Coello,et al.  Handling multiple objectives with particle swarm optimization , 2004, IEEE Transactions on Evolutionary Computation.

[30]  B.G. Sammakia,et al.  Optimization of cluster cooling performance for data centers , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.

[31]  Yogendra Joshi,et al.  Data Center Cooling Optimization: Ambient Intelligence Based Load Management (AILM) , 2009 .

[32]  Bahgat Sammakia,et al.  Multivariate Prediction of Airflow and Temperature Distributions Using Artificial Neural Networks , 2011 .

[33]  Qinghui Tang,et al.  Thermal -aware scheduling in Environmentally Coupled Cyber-Physical Distributed Systems , 2008 .

[34]  Jürgen Teich,et al.  Strategies for finding good local guides in multi-objective particle swarm optimization (MOPSO) , 2003, Proceedings of the 2003 IEEE Swarm Intelligence Symposium. SIS'03 (Cat. No.03EX706).

[35]  Jeffrey S. Chase,et al.  Making Scheduling "Cool": Temperature-Aware Workload Placement in Data Centers , 2005, USENIX Annual Technical Conference, General Track.

[36]  George Keith Batchelor,et al.  An Introduction to Fluid Dynamics. , 1969 .

[37]  Hoseyn Sayyaadi,et al.  Efficiency enhancement of a gas turbine cycle using an optimized tubular recuperative heat exchanger , 2012 .

[38]  Basman Elhadidi,et al.  Application of proper orthogonal decomposition to indoor airflows , 2005 .

[39]  Sandeep K. S. Gupta,et al.  Energy-Efficient Thermal-Aware Task Scheduling for Homogeneous High-Performance Computing Data Centers: A Cyber-Physical Approach , 2008, IEEE Transactions on Parallel and Distributed Systems.

[40]  Z. Yue.  A method for group decision-making based on determining weights of decision makers using TOPSIS , 2011 .

[41]  Jeffrey S. Chase,et al.  Weatherman: Automated, Online and Predictive Thermal Mapping and Management for Data Centers , 2006, 2006 IEEE International Conference on Autonomic Computing.

[42]  John F. Dannenhoffer,et al.  Efficient coupling of multizone and CFD indoor flow models through proper orthogonal decomposition , 2007 .