Using the branch-line directional coupler in the design of microwave bandpass filters

This paper addresses the application of the branch-line directional coupler to the design of microwave bandpass filters. The basic idea consists of using the branch-line coupler as a transversal filtering section by loading the coupled ports of the coupler with suitable transmission-line segments ending in an open circuit and taking the isolated port as the output node. Thus, under the signal interference philosophy involved in classic transversal filter schemes, bandpass transfer functions with perceptible stopbands and sharp cutoff slopes are derived. Furthermore, the main characteristics of the synthesized filtering response, such as the bandwidth or the position of the out-of-band power transmission zeros, can be easily controlled by means of the design parameters of the transversal section. Hence, a large variety of bandpass filtering profiles different from those offered by classical filter schemes can be realized. Finally, the experimental usefulness of the transversal filtering section based on the branch-line coupler is proven with the design and construction in microstrip technology of two microwave bandpass filter prototypes at 5 GHz.

[1]  R. Collin.  Foundations for microwave engineering , 1966 .

[2]  W. Jutzi,et al.  Microwave Bandwidth Active Transversal Filter Concept With MESFETs , 1971 .

[3]  C. L. Chao.  N-Way Branch Line Directional Couplers , 1974 .

[4]  E. M. Jones,et al.  Microwave Filters, Impedance-Matching Networks, and Coupling Structures , 1980 .

[5]  C. Rauscher,et al.  Microwave Active Filters Based on Transversal and Recursive Principles , 1985 .

[6]  Y. Tajima,et al.  A novel MMIC active filter with lumped and transversal elements , 1989, Digest of Papers.,Microwave and Millimeter-Wave Monolithic Circuits Symposium.

[7]  P. Guillon,et al.  Stability diagnosis of microwave recursive structures using the NDF methodology , 1995, Proceedings of 1995 IEEE MTT-S International Microwave Symposium.

[8]  C. Rauscher,et al.  Microwave channelized active filters-a new modular approach to achieving compactness and high selectivity , 1996 .

[9]  Theodore S. Rappaport,et al.  Wireless communications - principles and practice , 1996 .

[10]  P. Guillon,et al.  Microwave filters-applications and technology , 2002 .

[11]  Eric Rius,et al.  Recent advances in microwave active filter design. Part 1: Low‐frequency techniques and noise optimization , 2002 .

[12]  J. Alonso,et al.  On the design of high-linear and low-noise two-branch channelized active bandpass filters , 2003, IEEE Trans. Circuits Syst. II Express Briefs.

[13]  Kai Chang,et al.  Compact, low insertion-loss, sharp-rejection, and wide-band microstrip bandpass filters , 2003 .

[14]  C. Karpuz,et al.  Uniplanar compact wideband bandstop filter , 2003, IEEE Microwave and Wireless Components Letters.

[15]  Jose I. Alonso,et al.  MMIC Tunable Transversal Bandpass Active Filter at 9-12 GHz , 2003 .

[16]  L. Billonnet,et al.  Novel design approach for transversal notch filter using recursive principles , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[17]  H. Ghali,et al.  Miniaturized fractal rat-race, branch-line, and coupled-line hybrids , 2004, IEEE Transactions on Microwave Theory and Techniques.

[18]  Ming-Lin Chuang.  Miniaturized ring coupler of arbitrary reduced size , 2005, IEEE Microwave and Wireless Components Letters.

[19]  J.I. Alonso,et al.  Design of sharp-rejection and low-loss wide-band planar filters using signal-interference techniques , 2005, IEEE Microwave and Wireless Components Letters.

[20]  Kae-Oh Sun,et al.  A compact branch-line coupler using discontinuous microstrip lines , 2005 .

[21]  Shry-Sann Liao,et al.  A novel compact-size branch-line coupler , 2005 .