Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process

[1]  B. Tang,et al.  An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy , 2014 .

[2]  A. Mikhaylovskaya,et al.  A high-strength aluminium-based alloy with advanced superplasticity , 2014 .

[3]  B. Tang,et al.  Grain boundary character distribution and texture evolution in cold-drawn Ti–45Nb wires , 2013 .

[4]  R. Gauvin,et al.  Effect of extrusion temperature on texture evolution and recrystallization in extruded Mg-1% Mn and Mg-1% Mn-1.6%Sr alloys , 2013 .

[5]  Yang Ren,et al.  Texture in two cold-drawn beta Ti alloys , 2013 .

[6]  A. Singh,et al.  Effect of mode of deformation by rolling on texture evolution and yield locus anisotropy in a multifunctional β titanium alloy , 2012 .

[7]  D. Yi,et al.  Effects of cold deformation on microstructure, texture evolution and mechanical properties of Ti–Nb–Ta–Zr–Fe alloy for biomedical applications , 2012 .

[8]  Shujun Li,et al.  Microstructure and mechanical behavior of a Ti–24Nb–4Zr–8Sn alloy processed by warm swaging and warm rolling , 2012 .

[9]  A. Singh,et al.  Ti based biomaterials, the ultimate choice for orthopaedic implants – A review , 2009 .

[10]  S. Suwas,et al.  Study of texture evolution in metastable β-Ti alloy as a function of strain path and its effect on α transformation texture , 2009 .

[11]  C. H. Ward,et al.  A comparative study of the mechanical properties of high-strength -titanium alloys , 2008 .

[12]  D. Raabe,et al.  Texture inhomogeneity in a Ti–Nb-based β-titanium alloy after warm rolling and recrystallization , 2008 .

[13]  M. Meyers,et al.  Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis , 2007 .

[14]  K. Tsuzaki,et al.  Microstructure evolution in dual-phase stainless steel during severe deformation , 2006 .

[15]  J. G. Ferrero,et al.  Candidate materials for high-strength fastener applications in both the aerospace and automotive industries , 2005 .

[16]  M. Hasegawa,et al.  Formation mechanism of texture during dynamic recrystallization in γ-TiAl, nickel and copper examined by microstructure observation and grain boundary analysis based on local orientation measurements , 2003 .

[17]  Wei Sha,et al.  Experimental study and computer modelling of the β⇒α+β phase transformation in β21s alloy at isothermal conditions , 2003 .

[18]  P. Markovsky,et al.  E study and computer modelling of the b⇒ a1b phase transformation in b21s alloy at isothermal conditions , 2003 .

[19]  M. Hasegawa,et al.  Microstructural Study on Dynamic Recrystallization and Texture Formation in Pure Nickel , 2002 .

[20]  A. Singh,et al.  Microstructure and texture of rolled and annealed β titanium alloy Ti-10V-4.5Fe-1.5Al , 1999 .

[21]  R. Keith Bird,et al.  Titanium Alloys and Processing for High Speed Aircraft , 1998 .

[22]  N. Hansen,et al.  High angle boundaries formed by grain subdivision mechanisms , 1997 .

[23]  R. Boyer.  An overview on the use of titanium in the aerospace industry , 1996 .

[24]  N. Hansen,et al.  High angle boundaries and orientation distributions at large strains , 1995 .

[25]  D. Raabe,et al.  Relationship between rolling textures and shear textures in f.c.c. and b.c.c. metals , 1994 .

[26]  D. Raabe,et al.  Application of the method of superposition of harmonic currents for the simulation of inhomogeneous deformation during hot rolling of FeCr , 1994 .

[27]  D. Raabe,et al.  Texture and microstructure of hot rolled steel , 1992 .

[28]  S. Matthies,et al.  On the Reproduction of the Orientation Distribution Function of Texturized Samples from Reduced Pole Figures Using the Conception of a Conditional Ghost Correction , 1982 .

[29]  Hsun Hu,et al.  TEXTURE OF METALS , 1974 .

[30]  E. Starke,et al.  Deformation behavior and texture development in beta Ti-V alloys , 1974, Metallurgical and Materials Transactions B.