A theoretical model for the field-dependent conductivity of magneto-rheological gels and experimental verification

Abstract A magneto-rheological gel (MRG) is a kind of smart material fabricated by dispersing ferromagnetic particles in high viscosity polymer gel. The internal particles of MRG are uniformly dispersed under off-state. While with the precondition of an external applied magnetic field, the particles will form a reversible chain-like structure, in which process the electrical resistivity of MRG has an immense change. In order to deeply understand the changing mechanism of the magneto-resistance of MRG, a theoretical model based on both the magnetic-dipole behavior and the percolation theory was proposed in this work. This model incorporates the parameters of the magnetic field intensity and carbonyl iron powder (CIP) volume fraction. As a further effort to explore the magneto-resistance properties of MRG, a series of experimental testing were conducted. The magneto-resistance properties of MRG with different CIP volume fractions and under different magnetic fields were investigated. The experimental results indicated that the conductivity of MRG was significantly increased with the increasing magnetic field and CIP volume fraction. In addition, in order to verify the effectiveness of the proposed theoretical model, the experimental measured results and theoretically obtained results were compared. The validation results demonstrated that the theoretical model proposed in this work is capable of reproducing the field-dependent magneto-resistance properties of MRG.

[1]  Structure evolution in a paramagnetic latex suspension , 1992 .

[2]  Georges Bossis,et al.  Electrical resistivity mechanism in magnetorheological elastomer , 2009 .

[3]  Z. Weinberg,et al.  On tunneling in metal‐oxide‐silicon structures , 1982 .

[4]  Robert A. Anderson,et al.  Controlling percolation in field-structured particle composites: Observations of giant thermoresistance, piezoresistance, and chemiresistance , 2003 .

[5]  I. Bica.  Influence of magnetic field upon the electric capacity of a flat capacitor having magnetorheological elastomer as a dielectric , 2009 .

[6]  R. Negri,et al.  A flexible strain gauge exhibiting reversible piezoresistivity based on an anisotropic magnetorheological polymer , 2014 .

[7]  Patel,et al.  Differentiation of chemical components in a binary solvent vapor mixture using carbon/polymer composite-based chemiresistors , 2000, Analytical chemistry.

[8]  A. Safari,et al.  V2O3-Polymer Composite Thermistors , 1987 .

[9]  F. Lux,et al.  Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials , 1993 .

[10]  Seung-bok Choi,et al.  Magnetoresistance Characteristics of Magnetorheological Gel under a Magnetic Field , 2014 .

[11]  Jie Fu,et al.  A novel porous magnetorheological elastomer: preparation and evaluation , 2012 .

[12]  Xin Lan,et al.  Significantly reducing electrical resistivity by forming conductive Ni chains in a polyurethane shape-memory polymer/carbon-black composite , 2008 .

[13]  F. Carmona.  Conducting filled polymers , 1989 .

[14]  M. Pyo,et al.  Composites of low bandgap conducting polymer-wrapped MWNT and poly(methyl methacrylate) for low perc , 2010 .

[15]  S. Kirkpatrick.  Percolation and Conduction , 1973 .

[16]  Nonlinear pressure-dependent conductivity of magnetorheological elastomers , 2010 .

[17]  B. D. H. Tellegen,et al.  Magnetic-Dipole Models , 1962 .

[18]  Tongfei Tian,et al.  Sensing capabilities of graphite based MR elastomers , 2011 .

[19]  Abbas A. Dehghani-Sanij,et al.  Carbon based conductive polymer composites , 2007 .

[20]  O. E. Pérez,et al.  Anisotropic magnetoresistance and piezoresistivity in structured Fe3O4-silver particles in PDMS elastomers at room temperature. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[21]  J. Janzen.  On the critical conductive filler loading in antistatic composites , 1975 .

[22]  M. Tanemura,et al.  Double percolation effect on the electrical conductivity of conductive particles filled polymer blends , 1992 .

[23]  H. Thomas Hahn,et al.  Giant Magnetoresistance Behavior of an Iron/Carbonized Polyurethane Nanocomposite , 2007 .

[24]  Jie Fu,et al.  Magnetic Field-Dependent Normal Force of Magnetorheological Gel , 2013 .

[25]  Bin Sun,et al.  Long time response of soft magnetorheological gels. , 2012, The journal of physical chemistry. B.

[26]  J. Glatz-Reichenbach,et al.  FEATURE ARTICLE Conducting Polymer Composites , 1999 .

[27]  R. Hall.  Computer modelling of rubber-toughened plastics: random placement of monosized core-shell particles in a polymer matrix and interparticle distance calculations , 1991 .

[28]  Eduardo Mendes,et al.  Enhanced hardening of soft self-assembled copolymer gels under homogeneous magnetic fields , 2010 .

[29]  R M Scarisbrick,et al.  Electrically conducting mixtures , 1973 .

[30]  Pierre Delhaes,et al.  Piezoresistivity of heterogeneous solids , 1987 .

[31]  Seung-bok Choi,et al.  A new measurement method of magnetic flux density using magnetorheological fluid characteristics and a variable resistor circuit , 2015 .

[32]  M. Zilberman,et al.  On the "curiosity" of electrically conductive melt processed doped‐polyaniline/polymer blends versus carbon‐black/polymer compounds , 1997 .

[33]  E. Kramarenko,et al.  Strong magnetodielectric effects in magnetorheological elastomers , 2013 .

[34]  F. Bueche.  A new class of switching materials , 1973 .

[35]  G. Bossis,et al.  Thermoresistance and giant magnetoresistance of magnetorheological elastomers , 2009 .