Enhanced mechanical properties of lightweight Al 2 O 3 ‐C refractories reinforced by combined one‐dimensional ceramic phases

[1]  Chao Yu,et al.  In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3–C refractories with Al4SiC4 additives , 2021 .

[2]  Yawei Li,et al.  Microstructure and mechanical properties of lightweight Al2O3-C refractories using different carbon sources , 2020 .

[3]  Yawei Li,et al.  Optimized mechanical properties and oxidation resistance of low carbon Al2O3-C refractories through Ti3AlC2 addition , 2020 .

[4]  M. G. Kakroudi,et al.  Characterization of Ni-doped pyrolyzed phenolic resin and its addition to the Al2O3–C refractories , 2020 .

[5]  Qiang Wang,et al.  A novel approach to lightweight alumina‐carbon refractories for flow control of molten steel , 2020 .

[6]  H. Biermann,et al.  Recycling of carbon fiber composites in carbon-bonded alumina refractories , 2020 .

[7]  D. Das,et al.  Recycling of coal fly ash for fabrication of elongated mullite rod bonded porous SiC ceramic membrane and its application in filtration , 2020 .

[8]  M. Kuna,et al.  Influence of carbon content and coking temperature on the biaxial flexural strength of carbon-bonded alumina at elevated temperatures , 2020 .

[9]  R. Sarkar,et al.  Low carbon containing Al2O3-C refractories with nanocarbon as the sole carbon source , 2020, Ceramics International.

[10]  Guangqiang Li,et al.  A comparative study on the microstructures and mechanical properties of a dense and a lightweight magnesia refractories , 2019, Journal of Alloys and Compounds.

[11]  Chao Yu,et al.  Preparation and application of ZrC-coated flake graphite for Al2O3-C refractories , 2019, Journal of Alloys and Compounds.

[12]  B. Han,et al.  Effect of microporous corundum aggregates on microstructure and mechanical properties of lightweight corundum refractories , 2019, Ceramics International.

[13]  B. Zhu,et al.  Thermo-mechanical properties of Al2O3-C refractories with in situ synthesized non-oxide bonding phases , 2019, Ceramics International.

[14]  R. Sarkar,et al.  Study on the nanocarbon containing Al2O3 – C continuous casting refractories with reduced fixed carbon content , 2019, Journal of Alloys and Compounds.

[15]  D. Xiang,et al.  Mullite rod-enhanced porous SiC ceramics prepared at low temperature from photovoltaic waste , 2018, Journal of the European Ceramic Society.

[16]  Shaowei Zhang,et al.  Corrosion and penetration behaviors of slag/steel on the corroded interfaces of Al2O3-C refractories: Role of Ti3AlC2 , 2018, Corrosion Science.

[17]  H. Gu,et al.  Properties and microstructures of lightweight alumina containing different types of nano-alumina , 2018, Ceramics International.

[18]  Nan Li,et al.  Energy efficient lightweight periclase-magnesium alumina spinel castables containing porous aggregates for the working lining of steel ladles , 2018, Journal of the European Ceramic Society.

[19]  D. Jia,et al.  Enhanced thermal shock resistance of low-carbon Al2O3-C refractories with direct CVD synthesis of nano carbon decorated oxides , 2018 .

[20]  W. Xue,et al.  In situ synthesis mechanism of 15R–SiAlON reinforced Al2O3 refractories by Fe–Si liquid phase sintering , 2018 .

[21]  R. Sarkar,et al.  Nanocarbon containing Al2O3 – C continuous casting refractories: Effect of graphite content , 2018 .

[22]  Guanghui Wang,et al.  Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite , 2018 .

[23]  B. Fan,et al.  Influence of bonding carbon on low carbon Al2O3-C refractory composites , 2017 .

[24]  D. Jia,et al.  Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories , 2017 .

[25]  Yawei Li,et al.  Strengthening of Al2O3-C slide gate plate refractories with microcrystalline graphite , 2017 .

[26]  Yawei Li,et al.  Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide , 2017 .

[27]  Dietmar Gruber,et al.  Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness , 2017 .

[28]  H. Harmuth,et al.  Phase formation in Al2O3-C refractories with Al addition , 2017 .

[29]  Yawei Li,et al.  Combined Effects of Boron Carbide, Silicon, and MWCNTs in Alumina‐Carbon Refractories on Their Microstructural Evolution , 2017 .

[30]  B. Zhu,et al.  Microstructure evolution and its effect on thermo-mechanical properties of low-carbon Al2O3-C refractories , 2016 .

[31]  B. Zhu,et al.  Effect of in situ synthesized SiC whiskers and mullite phases on the thermo-mechanical properties of Al2O3–SiC–C refractories , 2016 .

[32]  R. Tronstad,et al.  Synthesis of SiC whiskers by VLS and VS process , 2016 .

[33]  Yawei Li,et al.  Enhanced mechanical performance of Al 2 O 3 -C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs) , 2016 .

[34]  Xuan He,et al.  The fabrication of porous corundum spheres with core-shell structure for corundum-spinel castables , 2015 .

[35]  Yawei Li,et al.  Effect of the reactivity and porous structure of expanded graphite (EG) on microstructure and properties of Al2O3–C refractories , 2015 .

[36]  Jingkun Yu,et al.  Preparation and Properties of Low-Carbon Al2O3–ZrO2–SiC–C Composite Refractories Containing LaAl11O18 Ceramic Phase , 2015, Refractories and Industrial Ceramics.

[37]  E. Storti,et al.  Development of multi-walled carbon nanotubes-based coatings on carbon-bonded alumina filters for steel melt filtration , 2015 .

[38]  Junfeng Chen,et al.  Preparation and characterization of porous MgO–Al2O3 refractory aggregates using an in-situ decomposition pore-forming technique , 2015 .

[39]  Yawei Li,et al.  Microstructures and mechanical properties of Al2O3–C refractories with addition of microcrystalline graphite , 2014 .

[40]  Lei Zhao,et al.  Synthesis of silicon carbide whiskers using reactive graphite as template , 2014 .

[41]  Ya-wei Li,et al.  Microstructure and mechanical properties of multi-walled carbon nanotubes containing Al2O3–C refractories with addition of polycarbosilane , 2013 .

[42]  Lei Zhao,et al.  Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes , 2012 .

[43]  Yawei Li,et al.  Microstructures and mechanical properties of Al2O3–C refractories with silicon additive using different carbon sources , 2011 .

[44]  H. Harmuth.  Characterisation of the Fracture Path in ‘Flexible’ Refractories , 2010 .

[45]  Jingkun Yu,et al.  Synthesis of Al2O3-SiC Composite and Its Effect on the Properties of Low-carbon MgO-C Refractories , 2010 .

[46]  Jingkun Yu,et al.  Synthesis of ZrO2-SiC composite powder and effect of its addition on properties of Al2O3-C refractories , 2007 .

[47]  V. Sahajwalla,et al.  Dissolution of carbon from alumina-carbon mixtures into liquid iron: Influence of carbonaceous materials , 2006 .

[48]  H. Rezaie,et al.  The effect of additives on the properties and microstructures of Al2O3-C refractories , 2006 .

[49]  Dong Xu,et al.  Synthesis of $beta;-SiC nanowhiskers by high temperature evaporation of solid reactants , 2004 .

[50]  T. Langdon,et al.  High temperature deformation of an alumina composite reinforced with silicon carbide whiskers , 1995 .

[51]  J. Milewski,et al.  Growth of beta-silicon carbide whiskers by the VLS process , 1985 .

[52]  Junn Nakayama,et al.  Direct Measurement of Fracture Energies of Brittle Heterogeneous Materials , 1965 .