论文信息 - Inductive power transfer for auxiliary power of medium voltage converters

Inductive power transfer for auxiliary power of medium voltage converters

An inductive power transfer system is designed to supply the auxiliary power of a medium voltage converter. The design is optimized with respect to voltage stability, efficiency, component stress and simplicity. The system is operated without control feedback and achieves constant voltage for varying load by careful selection of component values of the series-series compensated inductive power transfer circuit. This paper includes a detailed discussion of the operation principle, measurement results and sensitivity analysis.

[1] Robert L. Steigerwald. A comparison of half-bridge resonant converter topologies , 1987 .

[2] Chi K. Tse,et al. Design for Efficiency Optimization and Voltage Controllability of Series–Series Compensated Inductive Power Transfer Systems , 2014, IEEE Transactions on Power Electronics.

[3] J. W. Kolar,et al. Comparative evaluation of control methods for Inductive Power Transfer , 2012, 2012 International Conference on Renewable Energy Research and Applications (ICRERA).

[4] P. K. Steimer,et al. Contactless energy transmission for an isolated 100W gate driver supply of a medium voltage converter , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[5] F. Canales,et al. Modeling and η-α-Pareto Optimization of Inductive Power Transfer Coils for Electric Vehicles , 2015 .

[6] Grant Covic,et al. Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems , 2004, IEEE Transactions on Industrial Electronics.

[7] Ivica Stevanovic,et al. Modeling and $\eta $ - $\alpha $ -Pareto Optimization of Inductive Power Transfer Coils for Electric Vehicles , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[8] Enrico Santi,et al. Optimal design method to achieve both good robustness and efficiency in loosely-coupled wireless charging system employing series-parallel resonant tank with asymmetrical magnetic coupler , 2013, 2013 IEEE Energy Conversion Congress and Exposition.