Mesoscale modelling of selective laser melting: Thermal fluid dynamics and microstructural evolution
暂无分享,去创建一个
Moataz M. Attallah | Magnus Anderson | Richard Turner | Hector Basoalto | Chinnapat Panwisawas | C. Qiu | C. Panwisawas | H. Basoalto | J. Brooks | Y. Sovani | Magnus J. Anderson | R. Turner | Chunlei Qiu | Jeffery Brooks | Yogesh Sovani | M. Anderson | J. Brooks
[1] W. Johnson,et al. Thermal expansion of liquid Ti–6Al–4V measured by electrostatic levitation , 2006 .
[2] S. Khairallah,et al. Mesoscopic Simulation Model of Selective Laser Melting of Stainless Steel Powder , 2014 .
[3] Chee Kai Chua,et al. Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting , 2015 .
[4] Todd Palmer,et al. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium , 2007 .
[5] Modeling of powder absorption in additive manufacturing , 2014, 2014 Conference on Lasers and Electro-Optics (CLEO) - Laser Science to Photonic Applications.
[6] D. Brüggemann,et al. Shell-and-tube type latent heat thermal energy storage: numerical analysis and comparison with experiments , 2011 .
[7] Tom Craeghs,et al. A pragmatic model for selective laser melting with evaporation , 2009 .
[8] Wei Liu,et al. 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT , 2015 .
[9] L. Scriven,et al. The Marangoni Effects , 1960, Nature.
[10] L. Murr,et al. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting , 2012 .
[11] Wilfried Kurz,et al. Theory of Microstructural Development during Rapid Solidification , 1986 .
[12] Guoliang Qin,et al. Adaptive volumetric heat source models for laser beam and laser + pulsed GMAW hybrid welding processes , 2011 .
[13] C. Panwisawas,et al. A Multi‐Scale Multi‐Physics Approach to Modelling of Additive Manufacturing in Nickel‐Based Superalloys , 2016 .
[14] T. Ytrehus,et al. Kinetic theory approach to interphase processes , 1996 .
[15] Moataz M. Attallah,et al. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .
[16] A. Rubenchik,et al. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.
[17] Christoph Beckermann,et al. Diffuse interface modeling of two-phase flows based on averaging: mass and momentum equations , 2004 .
[18] D. Gu,et al. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties , 2014 .
[19] Xiangzhong Jin,et al. A study on fresnel absorption and reflections in the keyhole in deep penetration laser welding , 2002 .
[20] Moataz M. Attallah,et al. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy , 2014 .
[21] C. Körner,et al. Mesoscopic simulation of selective beam melting processes , 2011 .
[22] Alexander M. Rubenchik,et al. Denudation of metal powder layers in laser powder bed fusion processes , 2016 .
[23] Thomas Graf,et al. Multiple reflections and Fresnel absorption in an actual 3D keyhole during deep penetration laser welding , 2006 .
[24] T. DebRoy,et al. Heat transfer and fluid flow during electron beam welding of 21Cr–6Ni–9Mn steel and Ti–6Al–4V alloy , 2009 .
[25] Moataz M. Attallah,et al. On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting , 2015 .
[26] Moataz M. Attallah,et al. On the role of melt flow into the surface structure and porosity development during selective laser melting , 2015 .
[27] J. Brackbill,et al. A continuum method for modeling surface tension , 1992 .
[28] J. Mazumder,et al. Modelling of high-density laser-material interaction using fast level set method , 2001 .
[29] Manfred Geiger,et al. A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets , 2009, Prod. Eng..
[30] Moataz M. Attallah,et al. Microstructural and texture development in direct laser fabricated IN718 , 2014 .
[31] C. Gandin,et al. A three-dimensional cellular automation-finite element model for the prediction of solidification grain structures , 1999 .
[32] C. Gandin,et al. A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processes , 1994 .
[33] P. Masson,et al. A new approach to compute multi-reflections of laser beam in a keyhole for heat transfer and fluid flow modelling in laser welding , 2013 .
[34] M. Cross,et al. An enthalpy method for convection/diffusion phase change , 1987 .
[35] Yuwen Zhang,et al. Numerical Simulation of Random Packing of Spherical Particles for Powder-Based Additive Manufacturing , 2009 .
[36] C. Gandin,et al. Probabilistic modelling of microstructure formation in solidification processes , 1993 .