Study of Joining Different Types of Polymers by Friction Stir Welding

[1]  Kazuhiro Nakata,et al.  Joining of metal to plastic using friction lap welding , 2014 .

[2]  Ali Doniavi,et al.  An experimental study on mechanical properties of friction stir welded ABS sheets , 2013 .

[3]  Z. Kiss,et al.  Effect of welding parameters on the heat affected zone and the mechanical properties of friction stir welded poly(ethylene-terephthalate-glycol) , 2012 .

[4]  Yahya Bozkurt,et al.  The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets , 2012 .

[5]  Amir Mostafapour,et al.  A study on the role of processing parameters in joining polyethylene sheets via heat assisted friction stir welding: Investigating microstructure, tensile and flexural properties , 2012 .

[6]  Wallop Ratanathavorn.  Hybrid joining of aluminium to thermoplastics with friction stir welding (FSW) , 2012 .

[7]  Tibor Czigány,et al.  Microscopic analysis of the morphology of seams in friction stir welded polypropylene , 2012 .

[8]  S. Kashani-Bozorg,et al.  The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer , 2011 .

[9]  Gholamhassan Payganeh,et al.  Effects of friction stir welding process parameters on appearance and strength of polypropylene composite welds , 2011 .

[10]  Z. Kiss,et al.  Friction stir welding of fiber reinforced polymer composites , 2011 .

[11]  Yong Yan,et al.  Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy , 2010 .

[12]  M. Aydın,et al.  Effects of Welding Parameters and Pre-Heating on the Friction Stir Welding of UHMW-Polyethylene , 2010 .

[13]  A. Scialpi,et al.  Viblade™: friction stir welding for plastics , 2009 .

[14]  Y. Chen,et al.  Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys , 2009 .

[15]  S. Kashani-Bozorg,et al.  Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing , 2009 .

[16]  F. Quadrini,et al.  Friction stir welding of polyethylene sheets , 2009 .

[17]  A. Arici,et al.  Effects of tool tilt angle on tensile strength and fracture locations of friction stir welding of polyethylene , 2007 .

[18]  Chul B. Park,et al.  Effects of nanoparticles on the density reduction and cell morphology of extruded metallocene polyethylene/wood fiber nanocomposites , 2007 .

[19]  Hirofumi Takayama,et al.  Joining of aluminum alloy to steel by friction stir welding , 2006 .

[20]  J. C. Huang,et al.  Mg based nano-composites fabricated by friction stir processing , 2006 .

[21]  Radovan Kovacevic,et al.  Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper , 2006 .

[22]  Seung-Boo Jung,et al.  Microstructural investigation of friction stir welded pure titanium , 2005 .

[23]  A. Armagan Arici,et al.  Effects of double passes of the tool on friction stir welding of polyethylene , 2005 .

[24]  A. Yousefpour,et al.  Fusion Bonding/Welding of Thermoplastic Composites , 2004 .

[25]  Masao Ushio,et al.  Microstructures and mechanical properties of friction stir welds of 60% Cu–40% Zn copper alloy , 2004 .

[26]  S. Jung,et al.  The joint properties of copper by friction stir welding , 2004 .

[27]  S. Strand,et al.  Joining plastics - can friction stir welding compete? , 2003, Proceedings: Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Technology Conference (Cat. No.03CH37480).

[28]  N. Takasu.  Friction welding of plastics , 2003 .

[29]  Yutaka S. Sato,et al.  Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test , 2003 .

[30]  Lawrence E Murr,et al.  Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC , 2003 .

[31]  Anthony P. Reynolds,et al.  Structure, Properties, and Residual Stress of 304L Stainless Steel Friction Stir Welds , 2003 .

[32]  R. Mishra,et al.  Friction stir processing: a novel technique for fabrication of surface composite , 2003 .

[33]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[34]  W. Thomas,et al.  Friction stir welding for the transportation industries , 1997 .

[35]  Kalpana Mistry,et al.  Tutorial Plastics welding technology for industry , 1997 .