Sensory carbon fiber based textile-reinforced concrete for smart structures

This article investigates the feasibility of intelligent textile-reinforced concrete structural elements with sensing capabilities. The concept is based on dual use of glass and carbon fiber textiles as reinforcement and, at the same time, as a sensory agent. Experimental investigation demonstrates the feasibility of the concept in two applications: detecting strains in a mechanically loaded textile-reinforced concrete beam and monitoring the interaction of the structural element with a wet environment. By detecting the changes to the integrative electrical resistance of the carbon tow, the ability of the textile to sense strain and exposure to water is demonstrated. For strain sensing, the hybrid reinforcing textile provides electro-mechanical sensing with a gauge factor of the order of 1 and a detectable correlation with the load, strain, and displacement responses. For the detection of wetting, the implementation of the carbon tow in a Wheatstone bridge detects fractional resistance changes in the order of 10−5, a figure that is effectively detected by monitoring the voltage across the bridge. The response to wetting, which is conditioned by the cracking of the beam and the exposure to ionic conductive solutions, provides a mean to monitor the functionality and the structural health of the textile-reinforced concrete beam.

[1]  D.D.L. Chung,et al.  Effects of temperature and stress on the interface between concrete and its carbon fiber epoxy-matrix composite retrofit, studied by electrical resistance measurement , 2000 .

[2]  D.D.L. Chung,et al.  Continuous carbon fiber polymer-matrix composites and their joints, studied by electrical measurements , 2001 .

[3]  R. Montanini,et al.  Structural health monitoring of reinforced concrete beams by means of embedded fiber Bragg grating sensors , 2012, Other Conferences.

[4]  D.D.L. Chung,et al.  Piezoresistivity in continuous carbon fiber polymer-matrix and cement-matrix composites , 2000 .

[5]  D.D.L. Chung,et al.  Self-sensing of flexural damage and strain in carbon fiber reinforced cement and effect of embedded steel reinforcing bars , 2006 .

[6]  D.D.L. Chung,et al.  Carbon‐Fiber‐Reinforced Concrete as an Intrinsically Smart Concrete for Damage Assessment during Dynamic Loading , 1995 .

[7]  D. Chung,et al.  Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection , 1993 .

[8]  Jaycee H. Chung,et al.  Comparison of the Electrical Resistance and Potential Techniques for the Self-sensing of Damage in Carbon Fiber Polymer-Matrix Composites , 2006 .

[9]  Assaf Klar,et al.  Measures for identifying cracks within reinforced concrete beams using BOTDR , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  D. Chung,et al.  Effect of Moisture on Piezoresistivity of Carbon Fiber-Reinforced Cement Paste , 2008 .

[11]  Erez N. Allouche,et al.  Strain sensing of carbon fiber reinforced geopolymer concrete , 2011 .

[12]  D.D.L. Chung,et al.  CEMENT-MATRIX COMPOSITES FOR SMART STRUCTURES , 2000 .

[13]  Phillip Frank Gower Banfill,et al.  Activation energy and conduction in carbon fibre reinforced cement matrices , 2007 .

[14]  D. Chung.  Cement reinforced with short carbon fibers: a multifunctional material , 2000 .

[15]  D.D.L. Chung,et al.  Continuous carbon fibre epoxy-matrix composite as a sensor of its own strain , 1996 .

[16]  Jinping Ou,et al.  Electrode design, measuring method and data acquisition system of carbon fiber cement paste piezoresistive sensors , 2007 .

[17]  D.D.L. Chung,et al.  Electrical conduction behavior of cement-matrix composites , 2002 .

[18]  Byoungho Lee,et al.  Review of the present status of optical fiber sensors , 2003 .

[19]  D.D.L. Chung,et al.  Strain sensing using carbon fiber , 1999 .

[20]  Phil E. Irving,et al.  The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain , 2004 .

[21]  Jinping Ou,et al.  Piezoresistive Cement-based Strain Sensors and Self-sensing Concrete Components , 2009 .

[22]  D. Chung.  Cement-Based Electronics , 2001 .

[23]  Zhishen Wu,et al.  Self-structural Health Monitoring Function of RC Structures with HCFRP Sensors , 2006 .

[24]  D. Chung,et al.  Temperature/light sensing using carbon fiber polymer-matrix composite , 1999 .

[25]  Sergei Khotiaintsev,et al.  Structural health monitoring of concrete elements with embedded arrays of optical fibers , 2013, Smart Structures.

[26]  Assaf Klar,et al.  Damage Identification in Reinforced Concrete Beams Using Spatially Distributed Strain Measurements , 2013 .

[27]  F. Nanni,et al.  Self-sensing Nanocomposite CnP—GFRP Rods as Reinforcement and Sensors of Concrete Beams , 2009 .

[28]  D. Chung,et al.  Thermoelectric property tailoring by composite engineering , 2002 .

[29]  D.D.L. Chung,et al.  Analytical model of piezoresistivity for strain sensing in carbon fiber polymer-matrix structural composite under flexure , 2007 .

[30]  D. Chung,et al.  Damage detection using self-sensing concepts , 2007 .

[31]  Akira Todoroki,et al.  Electrical Resistance Change of Unidirectional CFRP Due to Applied Load , 2004 .

[32]  K. Krebber,et al.  Structural Health Monitoring by Distributed Fiber Optic Sensors Embedded into Technical Textiles , 2012 .

[33]  D.D.L. Chung,et al.  Damage in cement-based materials, studied by electrical resistance measurement , 2003 .

[34]  D. Chung.  Dispersion of Short Fibers in Cement , 2005 .

[35]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[36]  D.D.L. Chung,et al.  Carbon fiber reinforced concrete as an electrical contact material for smart structures , 1993 .

[37]  Josef Hegger,et al.  Schlanke Fußgängerbrücke aus Textilbeton , 2011 .

[38]  D.D.L. Chung,et al.  Electrical-resistance-based Sensing of Impact Damage in Carbon Fiber Reinforced Cement-based Materials , 2010 .

[39]  Fernando Pacheco-Torgal,et al.  Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam , 2013 .

[40]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[41]  Sihai Wen,et al.  Piezoresistivity in continuous carbon fiber cement-matrix composite , 1999 .

[42]  D.D.L. Chung,et al.  Early fatigue damage in carbon-fibre composites observed by electrical resistance measurement , 1998 .

[43]  Sihai Wen,et al.  Strain-Sensing Characteristics of Carbon Fiber-Reinforced Cement , 2005 .

[44]  T. Gries,et al.  Humidity and Strain Monitoring for Textile Reinforced Concrete , 2013 .

[45]  D. Chung,et al.  Silane-treated carbon fiber for reinforcing cement , 2001 .

[46]  Sihai Wen,et al.  Electrical-resistance-based damage self-sensing in carbon fiber reinforced cement , 2007 .

[47]  D. Chung,et al.  Carbon fiber structural composites as thermistors , 1999 .

[48]  M. Lieboldt.  Textile reinforced concrete multilayer composite pipes , 2006 .

[49]  C. Bakis,et al.  Self-monitoring, pseudo-ductile, hybrid FRP reinforcement rods for concrete applications , 2001 .

[50]  D. Chung.  Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing , 2012 .

[51]  D. Chung,et al.  Apparent negative electrical resistance in carbon fiber composites , 1999 .