Bending vibration of flat plates is controlled using patches of active constrained layer damping (ACLD) treatments. Each ACLD patch consists of a visco-elastic damping layer which is sandwiched between two piezo-electric layers. The first layer is directly bonded to the plate to sense its vibration and the second layer acts as an actuator to actively control the shear deformation of the visco-elastic damping layer according to the plate response. With such active/passive control capabilities the energy dissipation mechanism of the visco-elastic layer is enhanced and the damping characteristics of the plate vibration is improved. A finite element model is developed to analyze the dynamics and control of flat plates which are partially treated with multi-patches of ACLD treatments. The model is validated experimentally using an aluminum plate which is 0.05 cm thick, 25.0 cm long and 12.5 cm wide. The plate is treated with two ACLD patches, each of which is made of SOUNDCOAT (Dyad 606) visco-elastic layer sandwiched between two layers of AMP/polyvinylidene fluoride (PVDF) piezo-electric films. The piezo-electric axes of the patches are set at zero degrees relative to the plate longitudinal axis to control the bending mode. The effect of the gain of a proportional control action on the system performance is presented. Comparison between the theoretical predictions and the experimental results suggest the validity of the developed finite element model. Also, comparisons with the performance of conventional passive constrained layer damping clearly demonstrate the merits of the ACLD as an effective means for suppressing the vibration of flat plates.
[1]
Y. K. Cheung,et al.
Bending and vibration of multilayer sandwich beams and plates
,
1973
.
[2]
D. K. Rao,et al.
Frequency and Loss Factors of Sandwich Beams under Various Boundary Conditions
,
1978
.
[3]
N. T. Asnani,et al.
Vibration and damping analysis of multilayered rectangular plates with constrained viscoelastic layers
,
1984
.
[4]
T. Bailey,et al.
Distributed Piezoelectric-Polymer Active Vibration Control of a Cantilever Beam
,
1985
.
[5]
N. T. Asnani,et al.
Refined vibration and damping analysis of multilayered rectangular plates
,
1987
.
[6]
E. Crawley,et al.
Use of piezoelectric actuators as elements of intelligent structures
,
1987
.
[7]
J. C. Clemens,et al.
Vibrations of composite plate structures consisting of a constrained-layer damping sandwich with viscoelastic core
,
1992
.
[8]
Kevin Napolitano,et al.
Active constrained layer viscoelastic damping
,
1993
.
[9]
I. Y. Shen.
Bending vibration control of composite plate structures through intelligent constrained-layer treatments
,
1994,
Smart Structures.
[10]
I. Y. Shen,et al.
Hybrid Damping Through Intelligent Constrained Layer Treatments
,
1994
.
[11]
Ben Azvine,et al.
Initial studies into the use of active constrained-layer damping for controlling resonant vibration
,
1994,
Smart Structures.
[12]
J. Ro,et al.
Performance Characteristics of Active Constrained Layer Damping
,
1995
.
[13]
Daniel J. Inman,et al.
Finite element model for active constrained layer damping
,
1995,
Other Conferences.