Toward Computer-Aided Food Engineering: Mechanistic Frameworks for Evolution of Product, Quality and Safety During Processing
暂无分享,去创建一个
[1] M. Farid,et al. The analysis of heat and mass transfer during frying of food using a moving boundary solution procedure , 1998 .
[2] P. Fryer,et al. A finite-element analysis of heat generation and transfer during ohmic heating of food , 1990 .
[3] S. Sastry,et al. Heat Transfer During Frying of Potato Slices , 1999 .
[4] A. Datta,et al. Heat Transfer During Microwave Combination Heating: Computational Modeling and MRI Experiments , 2010 .
[5] R.G.M. van der Sman,et al. Moisture transport during cooking of meat: An analysis based on Flory-Rehner theory. , 2007 .
[6] H. Pitsch,et al. An automatic chemical lumping method for the reduction of large chemical kinetic mechanisms , 2008 .
[7] Robert W. Ivester,et al. Productivity Improvement through Modeling: An Overview of Manufacturing Experience for the Food Industry , 2008 .
[8] Antonio Valero,et al. Predictive Microbiology in Foods , 2012 .
[9] F. Rombouts,et al. Modeling of the Bacterial Growth Curve , 1990, Applied and environmental microbiology.
[10] A. Datta,et al. Microwave drying of spheres: Coupled electromagnetics-multiphase transport modeling with experimentation. Part II: Model validation and simulation results , 2015 .
[11] Randy L. Bell,et al. Computer Simulations to Support Science Instruction and Learning: A critical review of the literature , 2012 .
[12] R. Singh,et al. Heat transfer during immersion frying of frozen foods , 1997 .
[13] F.A.R. Oliveira,et al. Modelling the kinetics of water loss during potato frying with a compartmental dynamic model. , 1999 .
[14] P. Verboven,et al. A Three-Dimensional Multiscale Model for Gas Exchange in Fruit1[C][W][OA] , 2011, Plant Physiology.
[15] D. G. Black,et al. Development of associations and kinetic models for microbiological data to be used in comprehensive food safety prediction software. , 2010, Journal of food science.
[16] A. Datta,et al. Texture prediction during deep frying: A mechanistic approach , 2012 .
[17] G. Trystram,et al. Heat and Mass Transfer During Frying , 2008 .
[18] F. Jousse,et al. Modeling to Improve the Efficiency of Product and Process Development , 2008 .
[19] Kai Knoerzer,et al. Multiphysics Simulation of Innovative Food Processing Technologies , 2015, Food Engineering Reviews.
[20] A. Datta,et al. Coupled multiphase transport, large deformation and phase transition during rice puffing , 2016 .
[21] D. C. Esveld,et al. Effect of morphology on water sorption in cellular solid foods. Part I: Pore scale network model , 2012 .
[22] A. Datta. Status of Physics‐Based Models in the Design of Food Products, Processes, and Equipment , 2008 .
[23] R. Wallace,et al. Enhancing Food Safety , 2010 .
[24] R. V. D. Sman,et al. Prediction of the state diagram of starch water mixtures using the Flory–Huggins free volume theory , 2011 .
[25] Eva Balsa-Canto,et al. Quality and safety driven optimal operation of deep-fat frying of potato chips , 2013 .
[26] Alberto M. Sereno,et al. Modelling shrinkage during convective drying of food materials: a review , 2004 .
[27] John H. Cushman,et al. Three scale thermomechanical theory for swelling biopolymeric systems , 2003 .
[28] Ashim K. Datta,et al. Status of food process modeling and where do we go from here (Synthesis of the outcome from brainstorming) , 2008 .
[29] Convective control to microwave exposure of moist substrates. Part I: Model methodology , 2015 .
[30] R. Moreira,et al. Modeling the transport phenomena and structural changes during deep fat frying: Part I: model development , 2002 .
[31] J. N. Ikediala,et al. Finite element modeling of heat transfer in meat patties during single-sided pan-frying , 1996 .
[32] R. V. D. Sman. Soft condensed matter perspective on moisture transport in cooking meat , 2007 .
[33] Pawan Singh Takhar,et al. Hybrid mixture theory based moisture transport and stress development in corn kernels during drying: Coupled fluid transport and stress equations , 2011 .
[34] John H. Cushman,et al. Multiscale fluid transport theory for swelling biopolymers , 2003 .
[35] A. Datta,et al. An Improved, Easily Implementable, Porous Media Based Model for Deep-Fat Frying , 2007 .
[36] A. Datta,et al. Modeling Food Process, Quality and Safety: Frameworks and Challenges , 2013 .
[37] L. Boillereaux,et al. Modelling heat and mass transfer in deformable porous media: Application to bread baking , 2014 .
[38] J. D. Stigter,et al. A variance propagation algorithm for stochastic heat and mass transfer problems in food processes , 2001 .
[39] Ferruh Erdogdu,et al. Radio-frequency thawing of food products – A computational study , 2015 .
[40] Julio R. Banga,et al. On the Optimal Control of Contact-Cooking Processes , 2001 .
[41] G. Lian,et al. Modeling the hydration of foodstuffs: Temperature effects , 2003 .
[42] Ashim K. Datta,et al. An Introduction to Modeling of Transport Processes: Applications to Biomedical Systems , 2009 .
[43] A. Datta,et al. Mechanistic understanding of case-hardening and texture development during drying of food materials , 2015 .
[44] Ashim K. Datta,et al. Principles of Microwave Combination Heating , 2013 .
[45] A. A. Teixeira,et al. Numerical Modeling of Natural Convection Heating in Canned Liquid Foods , 1987 .
[46] A. Datta,et al. Transport in deformable food materials: A poromechanics approach , 2011 .
[47] William Johns,et al. Computer‐Aided Chemical Engineering , 2011 .
[48] Gilles Trystram,et al. Advances in research in food process engineering as presented at ICEF 9 , 2007 .
[49] Denis Cavallucci,et al. Building Innovation Pipelines through Computer-Aided Innovation - 4th IFIP WG 5.4 Working Conference, CAI 2011, Strasbourg, France, June 30 - July 1, 2011. Proceedings , 2011, IFIP CAI.
[50] A. Datta,et al. A multiphase porous medium transport model with distributed sublimation front to simulate vacuum freeze drying , 2015 .
[51] M. Boekel. Kinetic Modeling of Reactions In Foods , 2008 .
[52] Ashim K. Datta,et al. Simulation as an integrator in an undergraduate biological engineering curriculum , 2013, Comput. Appl. Eng. Educ..
[53] Paul Steinmann,et al. Models of Solvent Penetration in Glassy Polymers With an Emphasis on Case II Diffusion. A Comparative Review , 2011 .
[54] Ashim K. Datta,et al. A user-friendly general-purpose predictive software package for food safety , 2011 .
[55] Cédric Baudrit,et al. Modelling and analysis of complex food systems: State of the art and new trends , 2011 .
[56] B. Farkas,et al. Modeling heat and mass transfer in immersion frying. I, model development , 1996 .
[57] Ashim K. Datta,et al. Enabling computer-aided food process engineering: Property estimation equations for transport phenomena-based models , 2013 .
[58] I. Dincer,et al. Modelling of thermal and moisture diffusions in cylindrically shaped sausages during frying. , 1996 .
[59] Ignacio E. Grossmann,et al. Recent Advances in Mathematical Programming Techniques for the Optimization of Process Systems under Uncertainty , 2015 .
[60] R.G.M. van der Sman,et al. Thermodynamics of meat proteins , 2012 .
[61] A K Datta,et al. Uncertainty in thermal process calculations due to variability in first-order and Weibull kinetic parameters. , 2007, Journal of food science.
[62] J. Teixeira. [Quality and Safety]. , 2014, Revista portuguesa de cirurgia cardio-toracica e vascular : orgao oficial da Sociedade Portuguesa de Cirurgia Cardio-Toracica e Vascular.
[63] A. Datta,et al. Thermal stresses from large volumetric expansion during freezing of biomaterials. , 1998, Journal of biomechanical engineering.
[64] M. Balaban,et al. Computer Software for On‐Line Correction of Process Deviations in Batch Retorts , 2011 .
[65] N. Betoret,et al. Advanced food process engineering to model real foods and processes: The "SAFES" methodology , 2007 .
[66] M. Farid. A unified approach to the heat and mass transfer in melting, solidification, frying and different drying processes , 2001 .
[67] Eva Balsa-Canto,et al. Improving food processing using modern optimization methods , 2003 .
[68] Francesco Marra,et al. A numerical analysis of radio frequency heating of regular shaped foodstuff , 2008 .
[69] A. Datta,et al. Transport in deformable hygroscopic porous media during microwave puffing , 2013 .
[70] S. Guessasma,et al. Mechanical modelling of cereal solid foods , 2011 .
[71] Julio R. Banga,et al. Fuzzy finite element analysis of heat conduction problems with uncertain parameters , 2011 .
[72] B. Nicolai,et al. Computation of heat conduction in materials with random variable thermophysical properties , 1993 .
[73] Ashim K. Datta,et al. Modeling Transport in Porous Media With Phase Change: Applications to Food Processing , 2011 .
[74] A. Datta,et al. Microwave drying of spheres: Coupled electromagnetics-multiphase transport modeling with experimentation. Part I: Model development and experimental methodology , 2015 .
[75] K. Torrance,et al. Moisture transport in intensive microwave heating of biomaterials: a multiphase porous media model , 1999 .
[76] Y. Chen,et al. Modelling of a Batch Deep-Fat Frying Process for Tortilla Chips , 1997 .
[77] Jan Carmeliet,et al. Multiscale modeling in food engineering , 2013 .
[78] Jie Zhou,et al. Finite Element Modeling , 2015 .
[79] R G M van der Sman. Moisture transport during cooking of meat: An analysis based on Flory-Rehner theory. , 2007, Meat science.
[80] Tushar Gulati,et al. Soft matter approaches as enablers for food macroscale simulation. , 2012, Faraday discussions.
[81] P. Verboven,et al. Prediction of moisture loss across the cuticle of apple (Malus sylvestris subsp. mitis (Wallr.)) during storage: Part 1. Model development and determination of diffusion coefficients , 2003 .
[82] A. Datta. Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations , 2007 .
[83] Bradley P. Marks,et al. Status of Microbial Modeling in Food Process Models , 2008 .
[84] S. Mukherjee,et al. Transport processes and large deformation during baking of bread , 2005 .
[85] H. K. Mebatsion,et al. Three-Dimensional Gas Exchange Pathways in Pome Fruit Characterized by Synchrotron X-Ray Computed Tomography1[C][W][OA] , 2008, Plant Physiology.
[86] M. H. Gamble,et al. Technical note: Modelling moisture loss during potato slice frying , 2007 .
[87] R.G.M. van der Sman,et al. Simulations of confined suspension flow at multiple length scales , 2009 .
[88] Ashim K. Datta,et al. Electromagnetics, heat transfer, and thermokinetics in microwave sterilization , 2001 .
[89] Martin McKee,et al. Routine Medical Emergency Team Assessments of Patients Discharged From the PICU: Description of a Medical Emergency Team Follow-Up Program , 2015, Pediatric critical care medicine : a journal of the Society of Critical Care Medicine and the World Federation of Pediatric Intensive and Critical Care Societies.
[90] Kenneth E. Torrance,et al. Radiative heat exchange modeling inside an oven , 2009 .
[91] James K. Mitchell,et al. Components of Pore Water Pressure and their Engineering Significance , 1960 .
[92] P. Verboven,et al. A model for gas transport in pear fruit at multiple scales. , 2010, Journal of experimental botany.
[93] A. Datta,et al. Moisture, Oil and Energy Transport During Deep-Fat Frying of Food Materials , 1999 .
[94] Gilles Trystram,et al. Modelling of food and food processes , 2012 .
[95] Ashim K. Datta,et al. Interdisciplinary engineering approaches to study how pathogenic bacteria interact with fresh produce , 2013 .