Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries
暂无分享,去创建一个
Yong Tang | Xiaoqing Zhang | Yang Yang | Qiu Zhiqiang | Wei Yuan | Yuan Yuhang | Wang Chun | Yintong Ye | Yao Huang | Yong Tang | W. Yuan | Yao Huang | Yang Yang | Yuhang Yuan | Z. Qiu | Chun Wang | Xiaoqing Zhang | Yintong Ye | Zhiqiang Qiu
[1] T. Rajh,et al. Enhanced autonomic shutdown of Li-ion batteries by polydopamine coated polyethylene microspheres , 2014 .
[2] Inkjet printing colorimetric controllable and reversible poly-PCDA/ZnO composites , 2014 .
[3] Z. Sheng,et al. Porous Fe3O4 thin films by pulsed laser assisted chemical solution deposition at room temperature , 2019, Applied Surface Science.
[4] Chee Kai Chua,et al. Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review , 2017 .
[5] Luo Jian,et al. High-performance CuO/Cu composite current collectors with array-pattern porous structures for lithium-ion batteries , 2017 .
[6] S. Joo,et al. Ultra-thick Li-ion battery electrodes using different cell size of metal foam current collectors , 2015 .
[7] Simon Gaisford,et al. An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems , 2018, Pharmaceutical Research.
[8] Jun Lu,et al. 30 Years of Lithium‐Ion Batteries , 2018, Advanced materials.
[9] Kevin G. Gallagher,et al. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes , 2016 .
[10] J. Lewis,et al. 3D Printing of Customized Li‐Ion Batteries with Thick Electrodes , 2018, Advanced materials.
[11] A. Kurbatov,et al. Sputtered Porous Li-Fe-P-O Film Cathodes Prepared by Radio Frequency Sputtering for Li-ion Microbatteries , 2019, Scientific Reports.
[12] Y. Nho,et al. Electrochemical performances of inorganic membrane coated electrodes for li-ion batteries , 2010 .
[13] Xueliang Sun,et al. Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach. , 2018, ACS applied materials & interfaces.
[14] N. Job,et al. Electrochemical performances of Li4Mn5O12 films prepared by spray-coated sol-gel reaction , 2018, Journal of Power Sources.
[15] Vladimir Zalmanovich Mordkovich,et al. Carbon Nanofibers: A New Ultrahigh-Strength Material for Chemical Technology , 2003 .
[16] Yueping Fang,et al. Hierarchical Fe2O3@CNF fabric decorated with MoS2 nanosheets as a robust anode for flexible lithium-ion batteries exhibiting ultrahigh areal capacity , 2018 .
[17] Zhong Lin Wang,et al. Rationally designed graphene-nanotube 3D architectures with a seamless nodal junction for efficient energy conversion and storage , 2015, Science Advances.
[18] B. Blaiszik,et al. Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive Microspheres , 2012 .
[19] Philip J. Kitson,et al. Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.
[20] Ming-Chuan Leu,et al. A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing , 2017 .
[21] Zhenan Bao,et al. Fast and reversible thermoresponsive polymer switching materials for safer batteries , 2016, Nature Energy.
[22] Lei Zhang,et al. Recent progress in advanced electrode materials, separators and electrolytes for lithium batteries , 2018 .
[23] Keun-Ho Choi,et al. Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources , 2018 .
[24] Jun Yang,et al. 3D printing of ionic conductors for high-sensitivity wearable sensors , 2019, Materials Horizons.
[25] Qinglin Wu,et al. Hetero‐Nanonet Rechargeable Paper Batteries: Toward Ultrahigh Energy Density and Origami Foldability , 2015 .
[26] James E. Smay,et al. Catenary shape evolution of spanning structures in direct-write assembly of colloidal gels , 2012 .
[27] Xiaogang Han,et al. 3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage , 2017 .
[28] George Kenanakis,et al. 3D printed graphene-based electrodes with high electrochemical performance , 2017 .
[29] Jennifer X. Wen,et al. Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions , 2017 .
[30] Sung Chul Hong,et al. Effect of microporous structure on thermal shrinkage and electrochemical performance of Al2O3/poly(vinylidene fluoride-hexafluoropropylene) composite separators for lithium-ion batteries , 2010 .
[31] Benji Maruyama,et al. Composite batteries: a simple yet universal approach to 3D printable lithium-ion battery electrodes , 2016 .
[32] N. Rolland,et al. Micro-patterning of LiPON and lithium iron phosphate material deposited onto silicon nanopillars array for lithium ion solid state 3D micro-battery , 2011 .
[33] Diana Golodnitsky,et al. Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study , 2018 .
[34] Konstantinos G. Dassios,et al. 3D printed electrochemical energy storage devices , 2019, Journal of Materials Chemistry A.
[35] Sang-Hoon Park,et al. Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks , 2018, Advanced Functional Materials.
[36] Diana Golodnitsky,et al. Towards smart free form-factor 3D printable batteries , 2018 .
[37] W. Wang,et al. 3D direct writing fabrication of electrodes for electrochemical storage devices , 2017 .
[38] Massimiliana Carello,et al. Transient thermal analysis of a lithium-ion battery pack comparing different cooling solutions for automotive applications , 2017 .
[39] Hengyi Li,et al. In situ growth of copper rhodizonate complexes on reduced graphene oxide for high-performance organic lithium-ion batteries. , 2018, Chemical communications.
[40] Zhiyu Jiang,et al. Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique , 2008 .
[41] H. Munakata,et al. Preparation of micro-dot electrodes of LiCoO2 and Li4Ti5O12 for lithium micro-batteries , 2005 .
[42] Ian T. Norton,et al. Designing hydrocolloid based food-ink formulations for extrusion 3D printing , 2019, Food Hydrocolloids.
[43] Wei Zhu,et al. 3D optical printing of piezoelectric nanoparticle-polymer composite materials. , 2014, ACS nano.
[44] Martin Pumera,et al. 3D-printing technologies for electrochemical applications. , 2016, Chemical Society reviews.
[45] Feng Zhang,et al. 3D printing technologies for electrochemical energy storage , 2017 .
[46] Huaiguo Xue,et al. FeOx‐Based Materials for Electrochemical Energy Storage , 2018, Advanced science.
[47] S. Hao,et al. Multi-channel FeP@C octahedra anchored on reduced graphene oxide nanosheet with efficient performance for lithium-ion batteries , 2018, Carbon.
[48] J. Lewis,et al. 3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.
[49] O. Hussain,et al. Influence of Zr dopant on microstructural and electrochemical properties of LiCoO2 thin film cathodes by RF sputtering , 2018, Journal of Electroanalytical Chemistry.
[50] Y. Qu,et al. Carbon-assisted conversion reaction-based oxide nanomaterials for lithium-ion batteries , 2018 .
[51] Hong Yee Low,et al. 3D-Printed, Carbon-Nanotube-Wrapped, Thermoresponsive Polymer Spheres for Safer Lithium-Ion Batteries , 2018, Energy Technology.
[52] Yayue Pan,et al. Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries , 2018, Advanced materials.
[53] Dominique Guyomard,et al. Ink-jet printed porous composite LiFePO4 electrode from aqueous suspension for microbatteries , 2015 .
[54] Yan Zhang,et al. 3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.
[55] André W. Marshall,et al. Comprehensive analysis of dynamics and hazards associated with cascading failure in 18650 lithium ion cell arrays , 2019, Applied Energy.
[56] Myung‐Gil Kim,et al. Characterization of low-temperature solution-processed LiCoO2 thin-film cathode with molecular weight control of polyvinylpyrrolidone , 2018, Thin Solid Films.
[57] John F. Federici,et al. Fabrication of rechargeable lithium ion batteries using water-based inkjet printed cathodes , 2015 .
[58] Wei Liu,et al. 3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries , 2016, Advanced materials.
[59] Yong Hu,et al. Assembling carbon-coated α-Fe2O3 hollow nanohorns on the CNT backbone for superior lithium storage capability , 2012 .
[60] Bruce Dunn,et al. Three-dimensional battery architectures. , 2004, Chemical reviews.
[61] Francesco Mollica,et al. FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties , 2019, Polymers.
[62] A. Encinas,et al. 3D‐printed Current Collector Plates: Simulation and Performance Evaluation in a Mini Fuel Cell , 2018, Fuel Cells.
[63] Wei Wu. Inorganic nanomaterials for printed electronics: a review. , 2017, Nanoscale.
[64] Hyeong-Jin Kim,et al. Performance enhancement of Li-ion battery by laser structuring of thick electrode with low porosity , 2019, Journal of Industrial and Engineering Chemistry.
[65] Peter Dubruel,et al. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. , 2012, Biomaterials.
[66] C. Chua,et al. Metallic Nanoparticle Inks for 3D Printing of Electronics , 2019, Advanced Electronic Materials.
[67] M. Shobana,et al. Metal oxide coated cathode materials for Li ion batteries – A review , 2019, Journal of Alloys and Compounds.
[68] Bin Li,et al. Continuously 3D printed quantum dot-based electrodes for lithium storage with ultrahigh capacities , 2018 .
[69] James B. Robinson,et al. In-operando high-speed tomography of lithium-ion batteries during thermal runaway , 2015, Nature Communications.
[70] Tian Li,et al. Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries , 2016, Advanced materials.
[71] Joong Tark Han,et al. 3D Printing of Reduced Graphene Oxide Nanowires , 2015, Advanced materials.
[72] J. A. Lewis. Direct Ink Writing of 3D Functional Materials , 2006 .
[73] H. Munakata,et al. Fabrication of micro lithium-ion battery with 3D anode and 3D cathode by using polymer wall , 2012 .
[74] Jiecai Han,et al. Recent Development in Separators for High-Temperature Lithium-Ion Batteries. , 2019, Small.
[75] G. Yushin,et al. Towards Ultrathick Battery Electrodes: Aligned Carbon Nanotube – Enabled Architecture , 2012, Advanced materials.
[76] Horst Hahn,et al. Thick Electrodes for High Energy Lithium Ion Batteries , 2015 .
[77] Sylvie Grugeon,et al. Highly Loaded Graphite–Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing , 2018, Chemistry of Materials.
[78] Benji Maruyama,et al. 3D Printable Ceramic–Polymer Electrolytes for Flexible High‐Performance Li‐Ion Batteries with Enhanced Thermal Stability , 2017 .
[79] X. Duan,et al. Hierarchical 3D electrodes for electrochemical energy storage , 2018, Nature Reviews Materials.
[80] Akira Izumi,et al. Development of high capacity lithium-ion battery applying three-dimensionally patterned electrode , 2012 .
[81] Wei Yuan,et al. From Checkerboard‐Like Sand Barriers to 3D Cu@CNF Composite Current Collectors for High‐Performance Batteries , 2018, Advanced science.
[82] N. Hu,et al. Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .
[83] Hongli Zhu,et al. 3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose , 2019, Advanced materials.
[84] T. Kuruganti,et al. Laser Sintering of Printed Anodes for Al-Air Batteries , 2018 .
[85] Yang Shi,et al. Internal resistance and polarization dynamics of lithium-ion batteries upon internal shorting , 2018 .
[86] G. Blomgren. The development and future of lithium ion batteries , 2017 .
[87] G. Jabbour,et al. Inkjet Printing—Process and Its Applications , 2010, Advanced materials.
[88] Bin Li,et al. 3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries , 2018 .
[89] Jianqiu Li,et al. Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components , 2018, Applied Energy.
[90] Stefania Ferrari,et al. Latest advances in the manufacturing of 3D rechargeable lithium microbatteries , 2015 .
[91] Juan Carlos Ruiz-Morales,et al. Three dimensional printing of components and functional devices for energy and environmental applications , 2017 .
[92] J. Lewis,et al. Direct writing in three dimensions , 2004 .
[93] T. Bein,et al. Tin Oxide Based Nanomaterials and Their Application as Anodes in Lithium‐Ion Batteries and Beyond , 2019, ChemSusChem.
[94] Jong‐Won Lee,et al. Solid‐State Lithium Batteries: Bipolar Design, Fabrication, and Electrochemistry , 2019, ChemElectroChem.
[95] Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics , 2017, Scientific Reports.
[96] Alexandra M. Golobic,et al. Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.
[97] Huaiguo Xue,et al. FeS2 walnut-like microspheres wrapped with rGO as anode material for high-capacity and long-cycle lithium-ion batteries , 2018, Electrochimica Acta.
[98] Min-Sang Song,et al. Strategic dispersion of carbon black and its application to ink-jet-printed lithium cobalt oxide ele , 2011 .
[99] P. Poulin,et al. Graphene oxide dispersions: tuning rheology to enable fabrication , 2014 .
[100] Boyang Liu,et al. Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes , 2018, Advanced materials.
[101] Matthias Wessling,et al. 3D-printed conductive static mixers enable all-vanadium redox flow battery using slurry electrodes , 2018, 1804.05759.
[102] J. Pyrhönen,et al. Cylindrical Li-Ion Battery State of Health Evaluation by Differential Heat Analysis During Calendar Ageing , 2019, Journal of The Electrochemical Society.
[103] Ke Wang,et al. PVD synthesis of binder-free silicon and carbon coated 3D α-Fe2O3 nanorods hybrid films as high-capacity and long-life anode for flexible lithium-ion batteries , 2018, Energy.
[104] Peter J. Murphy,et al. Pure silicon thin-film anodes for lithium-ion batteries: A review , 2019, Journal of Power Sources.
[105] Dastan Sarbassov,et al. 3D printing: a critical review of current development and future prospects , 2019, Rapid Prototyping Journal.
[106] Xueliang Sun,et al. Carbon nanofiber-based nanostructures for lithium-ion and sodium-ion batteries , 2017 .
[107] Kepeng Song,et al. Self-supported Li4Ti5O12-C nanotube arrays as high-rate and long-life anode materials for flexible Li-ion batteries. , 2014, Nano letters.
[108] Yanlin Song,et al. Inkjet printing wearable electronic devices , 2017 .
[109] Shijie Tong,et al. In-plane nonuniform temperature effects on the performance of a large-format lithium-ion pouch cell , 2016 .
[110] Farhad Aslani,et al. Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges , 2019, Construction and Building Materials.
[111] Anand Kumar,et al. Classification of challenges in 3D printing for combined electrochemical and microfluidic applications: a review , 2019, Rapid Prototyping Journal.
[112] Jun Ma,et al. High mass loading ultrathick porous Li4Ti5O12 electrodes with improved areal capacity fabricated via low temperature direct writing , 2019, Electrochimica Acta.
[113] Jiangtao Hu,et al. 3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery , 2016 .
[114] Diana Golodnitsky,et al. Drop-on-Demand 3D Printing of Lithium Iron Phosphate Cathodes , 2018, Journal of The Electrochemical Society.
[115] Zhiyu Jiang,et al. A novel and facile route of ink-jet printing to thin film SnO2 anode for rechargeable lithium ion batteries , 2006 .
[116] X. Lou,et al. Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries , 2014 .
[117] Kejie Zhao,et al. Printing 3D Gel Polymer Electrolyte in Lithium-Ion Microbattery Using Stereolithography , 2017 .
[118] Zhiyu Jiang,et al. High-performance thin-film Li4Ti5O12 electrodes fabricated by using ink-jet printing technique and their electrochemical properties , 2009 .
[119] Yonggang Yao,et al. Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors , 2017 .
[120] Bruce Dunn,et al. Three-dimensional electrodes and battery architectures , 2011 .
[121] Shejun Hu,et al. Polypropylene-supported and nano-Al2O3 doped poly(ethylene oxide)–poly(vinylidene fluoride-hexafluoropropylene)-based gel electrolyte for lithium ion batteries , 2011 .
[122] Hongyang Ma,et al. Three-dimensional porous Zn2VO4/ZnO/C thin film anode materials for high-performance Li-ion batteries , 2019, Scripta Materialia.
[123] Dou Zhang,et al. 3D‐Printed Microelectrodes with a Developed Conductive Network and Hierarchical Pores toward High Areal Capacity for Microbatteries , 2018, Advanced Materials Technologies.
[124] Il-Doo Kim,et al. High-Power Aqueous Zinc-Ion Batteries for Customized Electronic Devices. , 2018, ACS nano.
[125] Jing Xia,et al. Fe2O3@C core@shell nanotubes: Porous Fe2O3 nanotubes derived from MIL-88A as cores and carbon as shells for high power lithium ion batteries , 2018, Journal of Alloys and Compounds.
[126] L. Saw,et al. Novel thermal management system using mist cooling for lithium-ion battery packs , 2018, Applied Energy.
[127] Jian Wang,et al. Experimental investigation of heat transfer and flow characteristics in finned copper foam heat sinks subjected to jet impingement cooling , 2019, Applied Energy.
[128] Adam W Perriman,et al. 3D Bioprinting: The Emergence of Programmable Biodesign , 2019, Advanced healthcare materials.
[129] Huisheng Peng,et al. Winding aligned carbon nanotube composite yarns into coaxial fiber full batteries with high performances. , 2014, Nano letters.
[130] W. He,et al. Compositional correlation and polymorphism in BaF2-PrF3 thin films deposited using electron-beam evaporation , 2019, Thin Solid Films.
[131] Ozan Toprakci,et al. A review of recent developments in membrane separators for rechargeable lithium-ion batteries , 2014 .
[132] John Evans,et al. Direct ink-jet printing of vertical walls , 2002 .
[133] Chen Chen,et al. Twisting Carbon Nanotube Fibers for Both Wire‐Shaped Micro‐Supercapacitor and Micro‐Battery , 2013, Advanced materials.
[134] Dominique Guyomard,et al. Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries , 2015 .