Explicit Discontinuous Deformation Analysis Method with Lumped Mass Matrix for Highly Discrete Block System

AbstractIn the traditional discontinuous deformation analysis (DDA) method, the implicit time integration scheme is used to integrate equations of motion for modeling the mechanical behavior of a h...

[1]  Jian-Hong Wu.  Applying discontinuous deformation analysis to assess the constrained area of the unstable Chiu-fen-erh-shan landslide slope , 2007 .

[2]  M. Tsesarsky,et al.  Tunnel roof deflection in blocky rock masses as a function of joint spacing and friction - A parametric study using discontinuous deformation analysis (DDA) , 2006 .

[3]  A. Munjiza.  The Combined Finite-Discrete Element Method: Munjiza/Discrete Element Method , 2004 .

[4]  T. Belytschko,et al.  The extended/generalized finite element method: An overview of the method and its applications , 2010 .

[5]  Qian Tian,et al.  Hydraulic fracturing modeling using the discontinuous deformation analysis (DDA) method , 2016 .

[6]  Musharraf Zaman,et al.  Thin‐layer element for interfaces and joints , 1984 .

[7]  H. Zheng,et al.  Numerical manifold space of Hermitian form and application to Kirchhoff's thin plate problems , 2013 .

[8]  G. Shi.  Contact theory , 2015 .

[9]  Hong Zheng,et al.  Modeling complex crack problems using the three-node triangular element fitted to numerical manifold method with continuous nodal stress , 2017 .

[10]  Wei Jiang,et al.  An efficient remedy for the false volume expansion of DDA when simulating large rotation , 2015 .

[11]  Guowei Ma,et al.  Footwall slope stability analysis with the numerical manifold method , 2011 .

[12]  H. Zheng,et al.  On generation of lumped mass matrices in partition of unity based methods , 2017 .

[13]  Chuangbing Zhou,et al.  Kinetic Energy Dissipation and Convergence Criterion of Discontinuous Deformations Analysis (DDA) for Geotechnical Engineering , 2013, Rock Mechanics and Rock Engineering.

[14]  Yossef H. Hatzor,et al.  Site response analysis with two‐dimensional numerical discontinuous deformation analysis method , 2014 .

[15]  Dimitri E. Beskos,et al.  Boundary Element Methods in Dynamic Analysis: Part II (1986-1996) , 1997 .

[16]  Chuangbing Zhou,et al.  A rigorous solution for the stability of polyhedral rock blocks , 2017 .

[17]  Hong Zheng,et al.  FDEM-flow3D: A 3D hydro-mechanical coupled model considering the pore seepage of rock matrix for simulating three-dimensional hydraulic fracturing , 2017 .

[18]  Jianmin Yin,et al.  Some modifications to the process of discontinuous deformation analysis , 2015 .

[19]  Hehua Zhu,et al.  Integration of three dimensional discontinuous deformation analysis (DDA) with binocular photogrammetry for stability analysis of tunnels in blocky rockmass , 2016 .

[20]  Feng Liu,et al.  The MLS-based numerical manifold method with applications to crack analysis , 2014, International Journal of Fracture.

[21]  Feng Liu,et al.  Primal mixed solution to unconfined seepage flow in porous media with numerical manifold method , 2015 .

[22]  P. A. Langston,et al.  Discrete element simulation of granular flow in 2D and 3D hoppers: Dependence of discharge rate and wall stress on particle interactions , 1995 .

[23]  Hong Zheng,et al.  Hydraulic fracturing modeling using the enriched numerical manifold method , 2018 .

[24]  Michael G. Katona,et al.  A simple contact–friction interface element with applications to buried culverts , 1983 .

[25]  Bernard Amadei,et al.  Extensions of discontinuous deformation analysis for jointed rock masses , 1996 .

[26]  H. Zheng,et al.  A rigorous and unified mass lumping scheme for higher-order elements , 2017 .

[27]  G. Ma,et al.  An explicit time integration scheme of numerical manifold method , 2014 .

[28]  Hong Zheng,et al.  A three-node triangular element fitted to numerical manifold method with continuous nodal stress for crack analysis , 2016 .

[29]  Hong Zheng,et al.  Mixed linear complementarity formulation of discontinuous deformation analysis , 2015 .

[30]  G. Shi.  DISCONTINUOUS DEFORMATION ANALYSIS: A NEW NUMERICAL MODEL FOR THE STATICS AND DYNAMICS OF DEFORMABLE BLOCK STRUCTURES , 1992 .

[31]  Hong Zheng,et al.  Discontinuous deformation analysis based on complementary theory , 2009 .

[32]  Hong Zheng,et al.  A four-node quadrilateral element fitted to numerical manifold method with continuous nodal stress for crack analysis , 2016 .

[33]  Zhiye Zhao,et al.  On the Implementation of augmented Lagrangian method in the two‐dimensional discontinuous deformation Analysis , 2014 .

[34]  Yu-Yong Jiao,et al.  A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing , 2015 .

[35]  Hong Zheng,et al.  New strategies for some issues of numerical manifold method in simulation of crack propagation , 2014 .

[36]  Q. H. Jiang,et al.  A Model of Point-to-Face Contact for Three-Dimensional Discontinuous Deformation Analysis , 2004 .

[37]  M. R. Yeung,et al.  A model of edge-to-edge contact for three-dimensional discontinuous deformation analysis , 2007 .

[38]  Qian Sheng,et al.  Modification of the discontinuous deformation analysis method and its application to seismic response analysis of large underground caverns , 2014 .

[39]  Feng Liu,et al.  Complementarity problem arising from static growth of multiple cracks and MLS-based numerical manifold method , 2015 .

[40]  H. Zheng,et al.  Three-dimensional fracture propagation with numerical manifold method , 2016 .

[41]  Louis Ngai Yuen Wong,et al.  Application of the numerical manifold method to model progressive failure in rock slopes , 2014 .

[42]  Na Chen,et al.  Automatic extraction of blocks from 3D point clouds of fractured rock , 2017, Comput. Geosci..

[43]  Kianoosh Hatami,et al.  Implementation of the finite element method in the three-dimensional discontinuous deformation analysis (3D-DDA) , 2008 .

[44]  S. Amir Reza Beyabanaki,et al.  High-order three-dimensional discontinuous deformation analysis (3-D DDA) , 2010 .