In situ synthesizing SiC particles and its strengthening effect on an Al–Si–Cu–Ni–Mg piston alloy

[1]  E. Acheson.  Carborundum: Its history, manufacture and uses , 1893 .

[2]  A. Rosengreen,et al.  Growth and Properties of β‐SiC Single Crystals , 1966 .

[3]  Maria A. Kuczmarski,et al.  Growth and Characterization of Cubic SiC Single‐Crystal Films on Si , 1987 .

[4]  L. L. Oden,et al.  Phase equilibria in the Al-Si-C system , 1987 .

[5]  C. Garcia-cordovilla,et al.  Reactivity of thermally oxidized and unoxidized SiC particulates with aluminium-silicon alloys , 1992 .

[6]  G. S. Upadhyaya,et al.  2014 and 6061 aluminium alloy-based powder metallurgy composites containing silicon carbide particles/fibres , 1995 .

[7]  F. Rodríguez-Reinoso,et al.  Synthesis of SiC and Si3N4: An overview , 1995 .

[8]  C. Garcia-cordovilla,et al.  Factors affecting pressure infiltration of packed SiC particulates by liquid aluminum , 1995 .

[9]  Su-Jien Lin,et al.  Effects of process parameters on the properties of squeeze-cast SiCp-6061 Al metal-matrix composite , 1996 .

[10]  P. Bowen,et al.  Tensile properties of particulate-reinforced metal matrix composites , 1996 .

[11]  C. Garcia-cordovilla,et al.  Abrasive wear resistance of aluminium alloy/ceramic particulate composites , 1996 .

[12]  G. S. Murty,et al.  Metal-ceramic composites via in-situ methods , 1997 .

[13]  B. M. Girish,et al.  Effect of SiC particle reinforcement on the unlubricated sliding wear behaviour of ZA-27 alloy composites , 1997 .

[14]  C. Oh,et al.  Effect of various processing methods on the interfacial reactions in SiCp/2024 Al composites , 1997 .

[15]  C. Kang,et al.  Effects of hot extrusion through a curved die on the mechanical properties of SiCp/Al composites fabricated by melt-stirring , 1999 .

[16]  Seh Chun Lim,et al.  The tribological properties of Al–Cu/SiCp metal–matrix composites fabricated using the rheocasting technique , 1999 .

[17]  Ernst Obermeier,et al.  High temperature piezoresistive β-SiC-on-SOI pressure sensor with on chip SiC thermistor , 1999 .

[18]  J. Bluet,et al.  Influence of growth conditions on the defect formation in SiC ingots , 1999 .

[19]  M. Diez,et al.  Influence of the carbon material on the synthesis of silicon carbide , 1999 .

[20]  C. Garcia-cordovilla,et al.  Pressure infiltration of packed ceramic particulates by liquid metals , 1999 .

[21]  Manoj Gupta,et al.  Effect of limited matrix–reinforcement interfacial reaction on enhancing the mechanical properties of aluminium–silicon carbide composites , 2001 .

[22]  D. Chaussende,et al.  Study of the interaction between graphite and Al-Si melts for the growth of crystalline silicon carbide , 2002 .

[23]  G. Ferro,et al.  On the growth of 4H–SiC by low-temperature liquid phase epitaxy in Al rich Al–Si melts , 2003 .

[24]  A. M. Irisarri,et al.  Study of the porosity produced in an aluminum alloy matrix composite due to a T6 heat treatment , 2004 .

[25]  D. Miracle.  Metal matrix composites – From science to technological significance , 2005 .

[26]  F. Rodríguez-Reinoso,et al.  Pressure infiltration of Al–12 wt.% Si–X (X = Cu, Ti, Mg) alloys into graphite particle preforms , 2006 .

[27]  J. Narciso,et al.  The role of the chemical reaction in the infiltration of porous carbon by NiSi alloys , 2006 .

[28]  J. Narciso,et al.  Reactive infiltration of porous graphite by NiSi alloys , 2008 .

[29]  G. Ferro,et al.  Vapor–Liquid–Solid Growth of 3C-SiC on α-SiC Substrates. 2. Growth Kinetics , 2008 .

[30]  Xiangfa Liu,et al.  Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy , 2009 .

[31]  M. Martínez-Escandell,et al.  The role of carbon biotemplate density in mechanical properties of biomorphic SiC , 2009 .

[32]  M. Martínez-Escandell,et al.  The combined effect of porosity and reactivity of the carbon preforms on the properties of SiC produced by reactive infiltration with liquid Si , 2009 .

[33]  J. Narciso,et al.  Wetting dynamics versus interfacial reactivity of AlSi alloys on carbon , 2010 .

[34]  J. Narciso,et al.  Pressureless infiltration versus wetting in AlSi/graphite system , 2010 .

[35]  Xiangfa Liu,et al.  Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys , 2010 .

[36]  Pengting Li,et al.  Distribution of TiB2 particles and its effect on the mechanical properties of A390 alloy , 2012 .

[37]  Xiangfa Liu,et al.  Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions , 2012 .

[38]  Pengting Li,et al.  Influence of carbon source on the microstructure of Al–Ti–C master alloy and its grain refining efficiency , 2013 .

[39]  M. Ferraris,et al.  Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results , 2013 .

[40]  Qianqian Sun,et al.  Morphological evolution of ZrAlSi phase and its impact on the elevated-temperature properties of Al–Si piston alloy , 2013 .

[41]  Xia Jiang,et al.  Extrusion textures in Al, 6061 alloy and 6061/SiCp nanocomposites , 2014 .

[42]  Xiaofan Du,et al.  A novel approach to synthesize SiC particles by in situ reaction in Al–Si–C alloys , 2014 .

[43]  Wenshu Yang,et al.  Aging behavior of 6061Al matrix composite reinforced with high content SiC nanowires , 2015 .

[44]  Weizheng Zhang,et al.  High-temperature mechanical properties and fracture mechanisms of Al–Si piston alloy reinforced with in situ TiB2 particles , 2015 .

[45]  R. Maheswaran,et al.  Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites , 2015 .

[46]  J. Eckert,et al.  The thermal expansion behaviour of SiCp/Al–20Si composites solidified under high pressures , 2015 .

[47]  J. Narciso,et al.  Effects of infiltration pressure on mechanical properties of Al–12Si/graphite composites for piston engines , 2016 .

[48]  Xiaofan Du,et al.  Phase transformation mechanism of Al4C3 by the diffusion of Si and a novel method for in situ synthesis of SiC particles in Al melt , 2016 .