A magnetorheological elastomer rail damper for wideband attenuation of rail noise and vibration

The noise and vibration effects of rails can have a significant impact on the environment surrounding the railways. Rail dampers are elements that are attached to the sides of the rail and can improve the track decay rate of rail and then enhance the rails’ ability to attenuate noises and vibrations. However, in practical applications, the most efficient rail damper design still cannot adjust its own parameters to adapt to different requirements because their stiffness and damping are fixed after designed. In this work, a tunable magnetorheological elastomer rail damper that works on the principle of a dynamic vibration absorber has been designed, analysed, characterised, and experimentally tested for the suppression of railway noise and vibration. The new rail damper incorporates variable stiffness magnetorheological elastomer layers, whose stiffness can be controlled by an externally applied magnetic field, to realise adaptive characteristics. Experimental characterisations of the magnetorheological elastomer rail damper were performed with an electromagnetic shaker. Subsequently, theoretical predictions of the track decay rate of a UIC-60 rail with different rail dampers and without rail damper were conducted; simulation results verified that magnetorheological elastomer rail dampers can improve the track decay rate of rail over a wider frequency range compared to conventional rail dampers and thus the performance of the magnetorheological elastomer rail damper outperforms other conventional rail dampers on rail noise reduction.

[1]  Huaxia Deng,et al.  Application of magnetorheological elastomer to vibration absorber , 2008 .

[2]  Huaxia Deng,et al.  Development of a novel variable stiffness and damping magnetorheological fluid damper , 2015 .

[3]  T. X. Wu,et al.  On the railway track dynamics with rail vibration absorber for noise reduction , 2008 .

[4]  Seung-Bok Choi,et al.  Effects of multiwall carbon nanotubes on viscoelastic properties of magnetorheological elastomers , 2016 .

[5]  John Matthew Ginder,et al.  Magnetorheological elastomers in tunable vibration absorbers , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  T. X. Wu,et al.  The influence of the non-linear stiffness behaviour of rail pads on the track component of rolling noise , 1999 .

[7]  Miao Yu,et al.  A new magnetorheological elastomer isolator in shear - Compression mixed mode , 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[8]  David Thompson,et al.  Decay rates of propagating waves in railway tracks at high frequencies , 2009 .

[9]  Xian-Xu Bai,et al.  Maximizing semi-active vibration isolation utilizing a magnetorheological damper with an inner bypass configuration , 2015 .

[10]  J Oertli.  The STAIRRS project, work package 1: a cost-effectiveness analysis of railway noise reduction on a European scale , 2003 .

[11]  Chris Jones,et al.  A tuned damping device for reducing noise from railway track , 2007 .

[12]  Huaxia Deng,et al.  Development of an adaptive tuned vibration absorber with magnetorheological elastomer , 2006 .

[13]  Kenneth A. Cunefare,et al.  Performance of MRE-based Vibration Absorbers , 2008 .

[14]  Chris Jones,et al.  A REVIEW OF THE MODELLING OF WHEEL/RAIL NOISE GENERATION , 2000 .

[15]  Gursel Alici,et al.  The development of an adaptive tuned magnetorheological elastomer absorber working in squeeze mode , 2014 .

[16]  Bijan Samali,et al.  Development and characterization of a magnetorheological elastomer based adaptive seismic isolator , 2013, Smart Materials and Structures.

[17]  Miao Yu,et al.  HALF CAR MAGNETORHEOLOGICAL SUSPENSION SYSTEM ACCOUNTING FOR NONLINEARITY AND TIME DELAY , 2005 .

[18]  C. J. C. Jonesa,et al.  The use of decay rates to analyse the performance of railway track in rolling noise generation , 2004 .

[19]  Masami Nakano,et al.  An adaptive tuned vibration absorber based on multilayered MR elastomers , 2015 .

[20]  Philip G. Harrison,et al.  Magnetic induction measurements and identification of the permeability of Magneto-Rheological Elastomers using finite element simulations , 2016 .

[21]  H P Liu,et al.  Reducing the rail component of rolling noise by vibration absorber: theoretical prediction , 2009 .

[22]  H. Du,et al.  A dynamic absorber with a soft magnetorheological elastomer for powertrain vibration suppression , 2009 .

[23]  David Thompson,et al.  Identification, modelling and reduction potential of railway noise sources: a critical survey , 2003 .

[24]  John Matthew Ginder,et al.  MAGNETOSTRICTIVE PHENOMENA IN MAGNETORHEOLOGICAL ELASTOMERS , 2002 .

[25]  Jie Fu,et al.  A new magnetorheological elastomer isolator in shear–compression mixed mode , 2015 .

[26]  Gursel Alici,et al.  A novel magnetorheological elastomer isolator with negative changing stiffness for vibration reduction , 2014 .

[27]  Faramarz Gordaninejad,et al.  Modeling of a new semi-active/passive magnetorheological elastomer isolator , 2014 .

[28]  David Thompson,et al.  Review of research into wheel/rail rolling noise reduction , 2006 .