Part Functionality Alterations Induced by Changes of Surface Integrity in Metal Milling Process: A Review

It has been proved that surface integrity alteration induced by machining process has a profound influence on the performance of a component. As a widely used processing technology, milling technology can process parts of different quality grades according to the processing conditions. The different cutting conditions will directly affect the surface state of the machined parts (surface texture, surface morphology, surface residual stress, etc.) and affect the final performance of the workpiece. Therefore, it is of great significance to reveal the mapping relationship between working conditions, surface integrity, and parts performance in milling process for the rational selection of cutting conditions. The effects of cutting parameters such as cutting speed, feed speed, cutting depth, and tool wear on the machined surface integrity during milling are emphatically reviewed. At the same time, the relationship between the machined surface integrity and the performance of parts is also revealed. Furthermore, problems that exist in the study of surface integrity and workpiece performance in milling process are pointed out and we also suggest that more research should be conducted in this area in future.

[1]  Jun Zhao,et al.  FEM-simulation of machining induced surface plastic deformation and microstructural texture evolution of Ti-6Al-4V alloy , 2017 .

[2]  P. T. Blotter,et al.  The Formation and Properties of Machining Burrs , 1976 .

[3]  Yuebin Guo,et al.  Superior surface integrity by sustainable dry hard milling and impact on fatigue , 2013 .

[4]  L. De Chiffre,et al.  Advantages and Industrial Applications of Three-Dimensional Surface Roughness Analysis , 1994 .

[5]  Erhan Budak,et al.  Analytical models for high performance milling. Part I: Cutting forces, structural deformations and tolerance integrity , 2006 .

[6]  Chen Zhitong,et al.  Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling , 2015 .

[7]  Jun Zhao,et al.  Research on the machined surface integrity under combination of various inclination angles in multi-axis ball end milling , 2014 .

[8]  David Taylor,et al.  THE FATIGUE PERFORMANCE OF MACHINED SURFACES , 1991 .

[9]  Jihong Hwang,et al.  Large strain deformation and ultra-fine grained materials by machining , 2005 .

[10]  Kishore,et al.  Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system , 2008 .

[11]  Yuebin Guo,et al.  Effect Tool Wear During End Milling on the Surface Integrity and Fatigue Life of Inconel 718 , 2014 .

[12]  Anselmo Eduardo Diniz,et al.  Influence of surface topography on the wear of hot forging dies , 2013 .

[13]  Shreyes N. Melkote,et al.  Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel , 2008 .

[14]  Zhenhua Wang,et al.  Surface topography and roughness of high-speed milled AlMn1Cu , 2016 .

[15]  Yuebin Guo,et al.  A comprehensive characterization of 3D surface topography induced by hard turning versus grinding , 2008 .

[16]  H. Jiang,et al.  Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys , 2013 .

[17]  Islam Shyha,et al.  Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V , 2018 .

[18]  Johanna Senatore,et al.  The effect of roughness and residual stresses on fatigue life time of an alloy of titanium , 2015 .

[19]  Somkiat Tangjitsitcharoen,et al.  Prediction of surface roughness in ball-end milling process by utilizing dynamic cutting force ratio , 2017, J. Intell. Manuf..

[20]  Junxue Ren,et al.  Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17 , 2017 .

[21]  T. I. El-Wardany,et al.  High-Speed Milling of Dies and Molds in Their Hardened State , 1997 .

[22]  Kepeng Qiu,et al.  Numerical Simulation of Machined Surface Topography and Roughness in Milling Process , 2006 .

[23]  Alain Iost,et al.  Sliding friction and wear performance of the nano-bioceramic α-Al2O3 prepared by high energy milling , 2015 .

[24]  Ramaraja Bhat,et al.  Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI-834 , 2003 .

[25]  Li-Min Zhu,et al.  Envelope Surface Modeling and Tool Path Optimization for Five-Axis Flank Milling Considering Cutter Runout , 2014 .

[26]  Min Wan,et al.  A New Algorithm for the Numerical Simulation of Machined Surface Topography in Multiaxis Ball-End Milling , 2008 .

[27]  R. C. McClung,et al.  A literature survey on the stability and significance of residual stresses during fatigue , 2007 .

[28]  S. Liang,et al.  Prediction of residual stress regeneration in multi-pass milling , 2016 .

[29]  Steven Y. Liang,et al.  Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part , 2015 .

[30]  David K. Aspinwall,et al.  The effect of machined topography and integrity on fatigue life , 2004 .

[31]  D. Yang,et al.  Surface integrity generated with peripheral milling and the effect on low-cycle fatigue performance of aeronautic titanium alloy Ti-6Al-4V , 2017, The Aeronautical Journal.

[32]  Xun Li,et al.  Influence of finish milling parameters on machined surface integrity and fatigue behavior of Ti1023 workpiece , 2017 .

[33]  Ismail Lazoglu,et al.  3D surface topography analysis in 5-axis ball-end milling , 2017 .

[34]  Yongshou Liang,et al.  Surface Integrity and Fatigue Behavior for High-Speed Milling Ti–10V–2Fe–3Al Titanium Alloy , 2014, Journal of Failure Analysis and Prevention.

[35]  Dinghua Zhang,et al.  Residual Stresses Analysis in Ball end Milling of Nickel-Based Superalloy Inconel 718 , 2017 .

[36]  Ronglei Sun,et al.  Analysis of chip morphology and surface topography in modulation assisted machining , 2016 .

[37]  Liu Xianli.  Research Progress of Machined Surface Integrity for High Stress Steel Cutting Process , 2011 .

[38]  Christopher J. Evans,et al.  White Layers and Thermal Modeling of Hard Turned Surfaces , 1997, Manufacturing Science and Engineering: Volume 2.

[39]  Xiaorong Zhou,et al.  Machining introduced microstructure modification in aluminium alloys , 2018, Journal of Alloys and Compounds.

[40]  M. Nouari,et al.  Surface integrity of dry machined titanium alloys , 2009 .

[41]  I. S. Jawahir,et al.  A review of surface integrity in machining and its impact on functional performance and life of machined products , 2008 .

[42]  Jing Ma,et al.  Hardening effect on machined surface for precise hard cutting process with consideration of tool wear , 2014 .

[43]  Ali Fatemi,et al.  Surface finish effect on fatigue behavior of forged steel , 2012 .

[44]  Jože Vižintin,et al.  Influence of surface preparation on roughness parameters, friction and wear , 2009 .

[45]  M. A. Mannan,et al.  Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools , 2004 .

[46]  Dwayne Arola,et al.  Estimating the fatigue stress concentration factor of machined surfaces , 2002 .

[47]  M. Jackson,et al.  Microstructural damage during high-speed milling of titanium alloys , 2010 .

[48]  I. Buj-Corral,et al.  Surface topography in ball-end milling processes as a function of feed per tooth and radial depth of cut , 2012 .

[49]  David K. Aspinwall,et al.  The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions , 2007 .

[50]  Haiyan Zhang,et al.  Modeling and predicting for surface topography considering tool wear in milling process , 2013 .

[51]  Ekkard Brinksmeier,et al.  Capability Profile of Hard Cutting and Grinding Processes , 2005 .

[52]  Wojciech Chrzanowski,et al.  Effect of surface treatment on the bioactivity of nickel-titanium. , 2008, Acta biomaterialia.

[53]  Jun Zhao,et al.  SURFACE INTEGRITY OF HIGH-SPEED FACE MILLED Ti-6Al-4V ALLOY WITH PCD TOOLS , 2013 .

[54]  George-Christopher Vosniakos,et al.  Predicting surface roughness in machining: a review , 2003 .

[55]  Dinghua Zhang,et al.  Evolution and empirical modeling of compressive residual stress profile after milling, polishing and shot peening for TC17 alloy , 2017 .

[56]  S. Liang,et al.  Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy , 2016 .

[57]  Zhanqiang Liu,et al.  Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy , 2014 .

[58]  D. Aspinwall,et al.  The effect of surface and subsurface condition on the fatigue life of Ti–25V–15Cr–2Al–0.2C %wt alloy , 2016 .

[59]  Domenico Umbrello,et al.  Investigation of surface integrity in dry machining of Inconel 718 , 2013 .

[60]  Kang Li,et al.  An approach for analyzing and controlling residual stress generation during high-speed circular milling , 2013 .

[61]  Song Zhang,et al.  Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steel , 2012, Prod. Eng..

[62]  Song Zhang,et al.  Influence of edge hone radius on cutting forces, surface integrity, and surface oxidation in hard milling of AISI H13 steel , 2018 .

[63]  Yuebin Guo,et al.  A comprehensive experimental study on surface integrity by end milling Ti―6Al―4V , 2009 .

[64]  D. Axinte,et al.  Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models , 2002 .

[65]  Berend Denkena,et al.  Prediction of the 3D surface topography after ball end milling and its influence on aerodynamics , 2015 .

[66]  Rlictlacl Field,et al.  A Review of Measuring Methods for Surface Integrity , 2005 .

[67]  Jun Zhao,et al.  Influence of tool path strategies on friction and wear behavior of high-speed ball-end-milled hardened AISI D2 steel , 2018 .

[68]  C. K. Toh,et al.  Surface topography analysis in high speed finish milling inclined hardened steel , 2004 .

[69]  Michael P Sealy,et al.  Fatigue performance of biodegradable magnesium–calcium alloy processed by laser shock peening for orthopedic implants , 2016 .

[70]  Min Wan,et al.  Theoretical prediction of machining-induced residual stresses in three-dimensional oblique milling processes , 2017 .

[71]  Steven Y. Liang,et al.  Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718 , 2018 .

[72]  Jun Zhao,et al.  Influence of tool path strategies on fatigue performance of high-speed ball-end-milled AISI H13 steel , 2018 .

[73]  W. Li,et al.  Process design space for optimal surface integrity in finish hard milling of tool steel , 2012, Prod. Eng..

[74]  George-Christopher Vosniakos,et al.  Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments , 2002 .

[75]  Youhong Tang,et al.  Formation of ultra-fine grained materials by machining and the characteristics of the deformation fields , 2009 .

[76]  Bin Zou,et al.  Experimental study of surface integrity and fatigue life in the face milling of inconel 718 , 2018 .

[77]  M. A. Mannan,et al.  Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools , 2004 .

[78]  Francisco J. Campa,et al.  Model for surface topography prediction in peripheral milling considering tool vibration , 2009 .

[79]  D. Ulutan,et al.  Machining induced surface integrity in titanium and nickel alloys: A review , 2011 .

[80]  H. Sidhom,et al.  Effect of near-surface residual stress and microstructure modification from machining on the fatigue endurance of a tool steel , 2002, Journal of Materials Engineering and Performance.

[81]  R. Chieragatti,et al.  Influence of Milling on the Fatigue Lifetime of a Ti6Al4V Titanium Alloy , 2015 .

[82]  Y. Shin,et al.  An experimental and numerical study on the face milling of Ti–6Al–4V alloy: Tool performance and surface integrity , 2011 .

[83]  W. König,et al.  Residual Stresses — Measurement and Causes in Machining Processes , 1982 .

[84]  Chung-Gil Kang,et al.  Estimation of die service life for a die cooling method in a hot forging process , 2005 .

[85]  Ekkard Brinksmeier,et al.  Surface integrity in material removal processes: Recent advances , 2011 .

[86]  P. Mativenga,et al.  White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools , 2008 .

[87]  Xiaohui Jiang,et al.  Effects of tool diameters on the residual stress and distortion induced by milling of thin-walled part , 2013 .

[88]  Imtiaz Ahmed Choudhury,et al.  Application of Taguchi method in the optimization of end milling parameters , 2004 .

[89]  Surface Damages Generated in Hole Making of a Cast Nickel-Based Alloy , 2011 .

[90]  Pedro Paulo Balestrassi,et al.  A normal boundary intersection approach to multiresponse robust optimization of the surface roughness in end milling process with combined arrays , 2014 .

[91]  Song Zhang,et al.  Taguchi Method Based Process Space for Optimal Surface Topography by Finish Hard Milling , 2009 .

[92]  Dong Yang,et al.  Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy , 2017 .

[93]  Dong Yang,et al.  The Effects of Machining-induced Surface Topography on Fatigue Performance of Titanium Alloy Ti-6Al-4V , 2018 .

[94]  S. Dominiak,et al.  Dry machining of Inconel 718, workpiece surface integrity , 2011 .

[95]  Yuebin Guo,et al.  SURFACE INTEGRITY CHARACTERIZATION AND PREDICTION IN MACHINING OF HARDENED AND DIFFICULT-TO-MACHINE ALLOYS: A STATE-OF-ART RESEARCH REVIEW AND ANALYSIS , 2009 .

[96]  K. J. Stout,et al.  Comprehensive study of parameters for characterising three- dimensional surface topography: III: Parameters for characterising amplitude and some functional properties , 1994 .

[97]  Kai Cheng,et al.  Characterization of the surface functionality on precision machined engineering surfaces , 2008 .