Parameters optimization of a novel 5-DOF gasbag polishing machine tool
暂无分享,去创建一个
[1] Bo Hu,et al. Kinematic analysis of two novel 3UPU I and 3UPU II PKMs , 2008, Robotics Auton. Syst..
[2] E. Castillo-Castaneda,et al. Improving path accuracy of a crank-type 6-dof parallel mechanism by stiction compensation , 2008 .
[3] J. A. Carretero,et al. Formulating Jacobian matrices for the dexterity analysis of parallel manipulators , 2006 .
[4] C. H. Liu,et al. The polishing of molds and dies using a compliance tool holder mechanism , 2005 .
[5] Takashi Miyoshi,et al. Automation of Polishing Process for a Cavity Surface on Dies and Molds by Using an Expert System , 1993 .
[6] Feng Gao,et al. Relationship Among Input-Force, Payload, Stiffness, and Displacement of a 6-DOF Perpendicular Parallel Micromanipulator , 2010 .
[7] Kenneth J. Waldron,et al. Kinematics of a Hybrid Series-Parallel Manipulation System , 1989 .
[8] Shiming Ji,et al. Novel gasbag polishing technique for free-form mold , 2007 .
[9] Yongsheng Zhao,et al. KINEMATIC ANALYSIS OF 5-UPS/PRPU 5-DOF PARALLEL MACHINE TOOL , 2004 .
[10] C. Gosselin,et al. Determination of maximal singularity-free zones in the workspace of planar three-degree-of-freedom parallel mechanisms , 2006 .
[11] Sug-Whan Kim,et al. The 'Precessions' tooling for polishing and figuring flat, spherical and aspheric surfaces. , 2003, Optics express.
[12] Mikael Norrlöf,et al. Closed-Loop Identification of an Industrial Robot Containing Flexibilities , 2003 .
[13] Li Ya,et al. Error modeling, sensitivity analysis and assembly process of a class of 3-DOF parallel kinematic machines with parallelogram struts , 2002 .
[14] Clément Gosselin,et al. Kinematic, static and dynamic analysis of a planar 2-DOF tensegrity mechanism , 2006 .
[15] Xin-Jun Liu,et al. Determination of the Link Lengths for a Spatial 3-DOF Parallel , 2006 .