Effects of ratios of Li2MnO3 and Li(Ni1/3Mn1/3Co1/3)O2 phases on the properties of composite cathode powders in spray pyrolysis

[1]  Debasish Mohanty,et al.  Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction , 2013 .

[2]  Seung M. Oh,et al.  Continuous activation of Li2MnO3 component upon cycling in Li1.167Ni0.233Co0.100Mn0.467Mo0.033O2 cathode material for lithium ion batteries , 2013 .

[3]  Jianming Zheng,et al.  Formation of the spinel phase in the layered composite cathode used in Li-ion batteries. , 2012, ACS nano.

[4]  Y. Kang,et al.  Electrochemical properties of nano-sized Li3V2(PO4)3/C composite powders prepared by spray pyrolysis from spray solution with chelating agent , 2011 .

[5]  Yongyao Xia,et al.  A new rechargeable lithium-ion battery with a xLi2MnO3·(1 − x) LiMn0.4Ni0.4Co0.2O2 cathode and a hard carbon anode , 2011 .

[6]  Tsutomu Ohzuku,et al.  High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mA h g−1 , 2011 .

[7]  Jianming Zheng,et al.  A comparison of preparation method on the electrochemical performance of cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2 for lithium ion battery , 2011 .

[8]  C. Ghanty,et al.  Synthesis and electrochemical characterization of xLi(Ni0.8Co0.15Mg0.05)O2–(1−x)Li[Li1/3Mn2/3]O2 (0.0 ≤ x ≤ 1.0) cathodes for Li rechargeable batteries , 2010 .

[9]  J. H. Lee,et al.  Characteristics of Li3V2(PO4)3/C powders prepared by ultrasonic spray pyrolysis , 2010 .

[10]  K. Amine,et al.  Nanostructured Lithium Nickel Manganese Oxides for Lithium-Ion Batteries , 2010 .

[11]  Feng Wu,et al.  Preparation and electrochemical performance of Li-rich layered cathode material, Li[Ni0.2Li0.2Mn0.6]O2, for lithium-ion batteries , 2010 .

[12]  Linda F. Nazar,et al.  Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .

[13]  Yang-Kook Sun,et al.  Electrochemical characterization of Li2MnO3–Li[Ni1/3Co1/3Mn1/3]O2–LiNiO2 cathode synthesized via co-precipitation for lithium secondary batteries , 2009 .

[14]  J. H. Huang,et al.  Understanding the phenomenon of increasing capacity of layered 0.65Li[Li1/3Mn2/3]O2·0.35Li(Ni1/3Co1/3Mn1/3)O2 , 2009 .

[15]  Joongpyo Shim,et al.  Characteristics of LiNi1/3Co1/3Mn1/3O2 Cathode Powder Prepared by Different Method in Lithium Rechargeable Batteries , 2008, International Journal of Electrochemical Science.

[16]  Yong Yang,et al.  Structural and electrochemical characterization of xLi[Li1/3Mn2/3]O2·(1 − x)Li[Ni1/3Mn1/3Co1/3]O2 (0 ≤ x ≤ 0.9) as cathode materials for lithium ion batteries , 2008 .

[17]  John T. Vaughey,et al.  Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3·(1 − x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7) , 2008 .

[18]  K. Amine,et al.  Physical and electrochemical properties of spherical Li1+x(Ni1/3Co1/3Mn1/3)1−xO2 cathode materials , 2008 .

[19]  Y. Kang,et al.  Al-doped Ni-rich cathode powders prepared from the precursor powders with fine size and spherical shape , 2007 .

[20]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[21]  K. Amine,et al.  Interpreting the structural and electrochemical complexity of 0.5Li2MnO3·0.5LiMO2 electrodes for lithium batteries (M = Mn0.5−xNi0.5−xCo2x, 0 ≤x≤ 0.5) , 2007 .

[22]  Y. S. Lee,et al.  Powder property and electrochemical characterization of Li2MnO3 material , 2007 .

[23]  Tsutomu Ohzuku,et al.  Solid-State Chemistry and Electrochemistry of LiCo1 ∕ 3Ni1 ∕ 3Mn1 ∕ 3O2 for Advanced Lithium-Ion Batteries III. Rechargeable Capacity and Cycleability , 2007 .

[24]  Christopher S. Johnson,et al.  Anomalous capacity and cycling stability of xLi2MnO3 · (1 − x)LiMO2 electrodes (M = Mn, Ni, Co) in lithium batteries at 50 °C , 2007 .

[25]  K. Amine,et al.  High capacity Li[Li0.2Ni0.2Mn0.6]O2 cathode materials via a carbonate co-precipitation method , 2006 .

[26]  K. Nahm,et al.  Synthesis and electrochemical properties of Li[Li0.07Ni0.1Co0.6Mn0.23]O2 as a possible cathode material for lithium-ion batteries , 2006 .

[27]  John T. Vaughey,et al.  Comments on the structural complexity of lithium-rich Li1+xM1−xO2 electrodes (M = Mn, Ni, Co) for lithium batteries☆ , 2006 .

[28]  John T. Vaughey,et al.  The Effects of Acid Treatment on the Electrochemical Properties of 0.5 Li2MnO3 ∙ 0.5 LiNi0.44Co0.25Mn0.31O2 Electrodes in Lithium Cells , 2006 .

[29]  Arumugam Manthiram,et al.  High Capacity, Surface-Modified Layered Li [ Li ( 1 − x ) ∕ 3Mn ( 2 − x ) ∕ 3Nix ∕ 3Cox ∕ 3 ] O2 Cathodes with Low Irreversible Capacity Loss , 2006 .

[30]  Christopher S. Johnson,et al.  Pre-conditioned layered electrodes for lithium batteries. , 2006 .

[31]  Soon Ho Chang,et al.  Investigation on the microscopic features of layered oxide Li[Ni1 / 3Co1 / 3Mn1 / 3]O2 and their influences on the cathode properties , 2006 .

[32]  P. Whitfield,et al.  Effects of synthesis on electrochemical, structural and physical properties of solution phases of Li , 2005 .

[33]  J. Prakash,et al.  Synthesis and Electrochemical Properties of Li [ Ni1 / 3Co1 / 3Mn ( 1 / 3 − x ) Mg x ] O 2 − y F y via Coprecipitation , 2004 .

[34]  John T. Vaughey,et al.  The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3 · (1 − x)LiMn0.5Ni0.5O2 electrodes , 2004 .

[35]  Yong Yang,et al.  Effects of preparation methods of LiNi0.8Co0.2O2 cathode materials on their morphology and electrochemical performance , 2004 .

[36]  Jung-Min Kim,et al.  Role of transition metals in layered Li[Ni, Co, Mn]O2 under electrochemical operation , 2004 .

[37]  I. Taniguchi,et al.  Relationship between the electrochemical and particle properties of LiMn2O4 prepared by ultrasonic spray pyrolysis , 2004 .

[38]  C. Yoon,et al.  Synthesis and structural characterization of layered Li[Ni1/3Co1/3Mn1/3]O2 cathode materials by ultrasonic spray pyrolysis method , 2004 .

[39]  J. Dahn,et al.  Lack of Cation Clustering in Li[NixLi1/3-2x/3Mn2/3-x/3]O2 (0 < x ≤ 1/2) and Li[CrxLi(1-x)/3Mn(2-2x)/3]O2 (0 < x < 1) , 2003 .

[40]  B. V. R. Chowdari,et al.  Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries , 2002 .

[41]  M. Wakihara,et al.  Electrochemical properties of LiM1/6Mn11/6O4 (M = Mn, Co, Al and Ni) as cathode materials for Li-ion batteries prepared by ultrasonic spray pyrolysis method , 2002 .

[42]  Zhonghua Lu,et al.  Synthesis, Structure, and Electrochemical Behavior of Li [ Ni x Li1 / 3 − 2x / 3Mn2 / 3 − x / 3 ] O 2 , 2002 .

[43]  M. Wakihara,et al.  Particle morphology and electrochemical performances of spinel LiMn2O4 powders synthesized using ultrasonic spray pyrolysis method , 2002 .

[44]  T. P. Kumar,et al.  Synthesis and surface treatment of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries , 2009 .