Numerical simulation and experimental validation of a large-area capacitive strain sensor for fatigue crack monitoring

A large-area electronics in the form of a soft elastomeric capacitor (SEC) has shown great promise as a strain sensor for fatigue crack monitoring in steel structures. The SEC sensors are inexpensive, easy to fabricate, highly stretchable, and mechanically robust. It is a highly scalable technology, capable of monitoring deformations on mesoscale systems. Preliminary experiments verified the SEC sensor's capability in detecting, localizing, and monitoring crack growth in a compact specimen. Here, a numerical simulation method is proposed to simulate accurately the sensor's performance under fatigue cracks. Such a method would provide a direct link between the SEC's signal and fatigue crack geometry, extending the SEC's capability to dense network applications on mesoscale structural components. The proposed numerical procedure consists of two parts: (1) a finite element (FE) analysis for the target structure to simulate crack growth based on an element deletion method; (2) an algorithm to compute the sensor's capacitance response using the FE analysis results. The proposed simulation method is validated based on test data from a compact specimen. Results from the numerical simulation show good agreement with the SEC's response from the laboratory tests as a function of the crack size. Using these findings, a parametric study is performed to investigate how the SEC would perform under different geometries. Results from the parametric study can be used to optimize the design of a dense sensor network of SECs for fatigue crack detection and localization.

[1]  Thomas Schumacher,et al.  Processing and Characterization of a Novel Distributed Strain Sensor Using Carbon Nanotube-Based Nonwoven Composites , 2015, Sensors.

[2]  Bo Cerup Simonsen,et al.  Experimental and numerical modelling of ductile crack propagation in large-scale shell structures , 2004 .

[3]  Filippo Ubertini,et al.  Dynamic Characterization of a Soft Elastomeric Capacitor for Structural Health Monitoring , 2015 .

[4]  Simon Laflamme,et al.  Damage detection on mesosurfaces using distributed sensor network and spectral diffusion maps , 2016 .

[5]  Haiying Huang,et al.  Monitoring fatigue crack growth and opening using antenna sensors , 2010 .

[6]  Ashok Saxena,et al.  Review and extension of compliance information for common crack growth specimens , 1978 .

[7]  S. Laflamme,et al.  Fatigue Crack Monitoring using Large-area , Flexible Capacitive Strain Sensors , 2015 .

[8]  Simon Laflamme,et al.  Soft Elastomeric Capacitor Network for Strain Sensing Over Large Surfaces , 2013, IEEE/ASME Transactions on Mechatronics.

[9]  Branko Glisic,et al.  Crack detection and characterization techniques—An overview , 2014 .

[10]  N. Kotov,et al.  Tailoring Piezoresistive Sensitivity of Multilayer Carbon Nanotube Composite Strain Sensors , 2008 .

[11]  Chul Min Yeum,et al.  Vision‐Based Automated Crack Detection for Bridge Inspection , 2015, Comput. Aided Civ. Infrastructure Eng..

[12]  Boris A. Zárate,et al.  Prediction of fatigue crack growth in steel bridge components using acoustic emission , 2011 .

[13]  J. Fisher,et al.  FATIGUE AND FRACTURE IN STEEL BRIDGES , 1984 .

[14]  Jerome J. Connor,et al.  Robust Flexible Capacitive Surface Sensor for Structural Health Monitoring Applications , 2013 .

[15]  Yang Wang,et al.  Passive wireless antenna sensor for strain and crack sensing—electromagnetic modeling, simulation, and testing , 2013 .

[16]  Jian Li,et al.  Smart sensing skin for detection and localization of fatigue cracks , 2015 .

[17]  F. Chang,et al.  Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics , 2004 .

[18]  John W. Fisher.  Fatigue and Fracture in Steel Bridges: Case Studies , 1984 .

[19]  Daniele Inaudi,et al.  Development of method for in-service crack detection based on distributed fiber optic sensors , 2012 .

[20]  Simon Laflamme,et al.  Model calibration for a soft elastomeric capacitor sensor considering slippage under fatigue cracks , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Branko Glisic,et al.  Detection of Steel Fatigue Cracks with Strain Sensing Sheets Based on Large Area Electronics , 2015, Sensors.

[22]  Achintya Haldar,et al.  Bridge fatigue damage evaluation and updating using non-destructive inspections , 1996 .

[23]  Filippo Ubertini,et al.  Investigation of Dynamic Properties of a Novel Capacitive-based Sensing Skin for Nondestructive Testing , 2015 .

[24]  N. Kotov,et al.  Multifunctional layer-by-layer carbon nanotube–polyelectrolyte thin films for strain and corrosion sensing , 2007 .

[25]  M. Gadala,et al.  Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian–Eulerian finite-element method , 2000 .

[26]  Sashi K. Kunnath,et al.  Macromodel-Based Simulation of Progressive Collapse: Steel Frame Structures , 2008 .

[27]  Ashutosh Bagchi,et al.  Image-based retrieval of concrete crack properties for bridge inspection , 2014 .

[28]  T. Belytschko,et al.  A comparative study on finite element methods for dynamic fracture , 2008 .