Fatigue delamination growth rates and thresholds of composite laminates under mixed mode loading

[1]  Libin Zhao,et al.  Mode I delamination growth of multidirectional composite laminates under fatigue loading , 2011 .

[2]  M. Benzeggagh,et al.  Experimental development of fatigue delamination threshold criterion , 2011 .

[3]  M. Bartsch,et al.  Simulation and experimental validation of mixed mode delamination in multidirectional CF/PEEK laminates under fatigue loading , 2011 .

[4]  Gerald Pinter,et al.  Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions , 2009 .

[5]  Bent F. Sørensen,et al.  Characterizing delamination of fibre composites by mixed mode cohesive laws , 2009 .

[6]  A. Canteli,et al.  Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading , 2008 .

[7]  J. Botsis,et al.  Bridging tractions in mode I delamination: Measurements and simulations , 2008 .

[8]  A. Morais,et al.  Mixed mode I + II interlaminar fracture of carbon/epoxy laminates , 2008 .

[9]  Barry D. Davidson,et al.  An Accurate Mixed-mode Delamination Failure Criterion for Laminated Fibrous Composites Requiring Limited Experimental Input , 2007 .

[10]  Masaki Hojo,et al.  Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf , 2006 .

[11]  Leif Asp,et al.  Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading , 2004 .

[12]  Emile S. Greenhalgh,et al.  Delamination Growth and Thresholds in a Carbon/Epoxy Composite under Fatigue Loading , 2001 .

[13]  V. Tamužs,et al.  Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens , 2001 .

[14]  Jr. J. Crews,et al.  A Mixed-Mode Bending Apparatus for Delamination Testing , 1998 .

[15]  B. Davidson,et al.  Evaluation of Data Reduction Methods , 1997 .

[16]  J. H. Crews,et al.  Redesign of the Mixed-Mode Bending Delamination Test to Reduce Nonlinear Effects , 1992 .

[17]  Roderick H. Martin.  INTERLAMINAR FRACTURE CHARACTERIZATION: A CURRENT REVIEW , 1991 .

[18]  J. Williams,et al.  Corrections needed in double-cantilever beam tests for assessing the interlaminar failure of fibre-composites , 1989 .

[19]  T. Adachi,et al.  Mode I fatigue delamination of Zanchor-reinforced CF/epoxy laminates , 2010 .

[20]  D. Le,et al.  A total fatigue life model for mode I delaminated composite laminates , 2006 .

[21]  F. Brandt.  New load introduction concept for improved and simplified delamination beam testing , 1998 .

[22]  M. Benzeggagh,et al.  Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading , 1997 .

[23]  B. Davidson,et al.  Evaluation of Data Reduction Methods for the Mixed Mode Bending Test , 1996 .

[24]  J. G. Williams,et al.  The mixed-mode delamination of fibre composite materials , 1993 .

[25]  J. Williams.  End corrections for orthotropic DCB specimens , 1989 .

[26]  P. Gradin,et al.  Fatigue Thresholds of Delamination Crack Growth in Orthotropic Graphite/Epoxy Laminates , 1985 .

[27]  W. S. Johnson.  Delamination and Debonding of Materials , 1985 .

[28]  J. Eisenmann,et al.  Characterizing delamination growth in graphite-epoxy , 1982 .