Non-Invasive Oxygen Determination in Intelligent Packaging Using a Smartphone

Here, we present a technique for the determination of the gaseous oxygen concentration inside packed food. It is based on the use of a luminescent membrane sensitive to O2 that is optically excited and read by a smartphone. The flash of the smartphone along with an optical filter is used as the light source for the optical stimulation of the membrane. The luminescence generated, which is quenched by the surrounding gaseous oxygen, is registered by the rear camera of the same device. The response parameter is defined by combining the registered intensities at two different wavelength ranges corresponding to the emission and the absorption peaks of the sensitive membrane. Thanks to this novel response parameter, the sensitivity is increased and, more importantly, the thermal dependence of the membrane is significantly reduced. This approach allows the use of a luminescent O2-sensitive membrane for intelligent packaging with no need of any associated electronics for its excitation and reading. This means that an oxygen sensor is developed, where a luminescent compound acts as an indicator, therefore combining the advantages of both schemes, that is, the simplicity and reduced cost of indicators with the high sensitivity and accuracy of selective sensors.

[1]  Peter Douglas,et al.  A Novel Luminescence-Based Colorimetric Oxygen Sensor with a “Traffic Light” Response , 2006, Journal of Fluorescence.

[2]  O. Wolfbeis,et al.  Dual fluorescence sensor for trace oxygen and temperature with unmatched range and sensitivity. , 2008, Analytical chemistry.

[3]  Jung H. Han,et al.  Innovations in food packaging , 2014 .

[4]  Lirong Zheng,et al.  Radio frequency identification enabled wireless sensing for intelligent food logistics , 2014, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[5]  Dmitri B. Papkovsky,et al.  Nondestructive Monitoring of Oxygen Profiles in Packaged Foods Using Phase-Fluorimetric Oxygen Sensor , 2001 .

[6]  Andrew Mills,et al.  Simple inkjet-printed UV-activated oxygen indicator , 2013 .

[7]  L. Capitán-Vallvey,et al.  Water based-ionic liquid carbon dioxide sensor for applications in the food industry , 2017 .

[8]  L. Capitán-Vallvey,et al.  Screen printed flexible radiofrequency identification tag for oxygen monitoring. , 2013, Analytical chemistry.

[9]  Ruth Shinar,et al.  Structurally integrated organic light emitting device-based sensors for gas phase and dissolved oxygen. , 2006, Analytica chimica acta.

[10]  Kenneth T. V. Grattan,et al.  Investigations on exponential lifetime measurements for fluorescence thermometry , 2000 .

[11]  M. L Rooney,et al.  Active Food Packaging , 1995 .

[12]  Sergey M Borisov,et al.  Low cost referenced luminescent imaging of oxygen and pH with a 2-CCD colour near infrared camera. , 2014, The Analyst.

[13]  D. Dong,et al.  Temperature effect on fluorescence of PtOEP embedded in sol–gel membrane used in oxygen sensor , 2013 .

[14]  Paul Takhistov,et al.  Intelligent Packaging: Concepts and Applications , 2005 .

[15]  A. Mills.  Oxygen indicators and intelligent inks for packaging food. , 2005, Chemical Society reviews.

[16]  Hana Lee,et al.  Integration of an oxygen indicator sensor with a passive UHF band RFID tag , 2016 .

[17]  Ki Hwan Eom,et al.  The Vegetable Freshness Monitoring System Using RFID with Oxygen and Carbon Dioxide Sensor , 2012, Int. J. Distributed Sens. Networks.

[18]  A. Palma,et al.  Flexible Passive near Field Communication Tag for Multigas Sensing. , 2017, Analytical chemistry.

[19]  O. Wolfbeis,et al.  Optical methods for sensing and imaging oxygen: materials, spectroscopies and applications. , 2014, Chemical Society reviews.

[20]  Masoud Ghaani,et al.  An overview of the intelligent packaging technologies in the food sector , 2016 .

[21]  J. Kerry,et al.  Nondestructive and continuous monitoring of oxygen levels in modified atmosphere packaged ready-to-eat mixed salad products using optical oxygen sensors, and its effects on sensory and microbiological counts during storage. , 2013, Journal of food science.

[22]  Alberto J. Palma,et al.  Flexible passive tag based on light energy harvesting for gas threshold determination in sealed environments , 2016 .

[23]  Daniele Tosi,et al.  Design of a Smartphone Plastic Optical Fiber Chemical Sensor for Hydrogen Sulfide Detection , 2017, IEEE Sensors Journal.

[24]  U. Samotyja,et al.  The use of oxygen content determination method based on fluorescence quenching for rapeseed oil shelf-life assessment , 2013 .

[25]  Jongwon Park,et al.  Color Intensity Method for Hydrogel Oxygen Sensor Array , 2010, IEEE Sensors Journal.

[26]  Andrew Mills,et al.  An O2 smart plastic film for packaging. , 2012, The Analyst.

[27]  K. Bremer,et al.  Fibre optic surface plasmon resonance sensor system designed for smartphones. , 2015, Optics express.

[28]  Edible films and coatings : characteristics and properties , 2022 .

[29]  Andrew Mills,et al.  UV-Activated Luminescence/Colourimetric O2 Indicator , 2008 .

[30]  Keehoon Won,et al.  Novel water-resistant UV-activated oxygen indicator for intelligent food packaging. , 2013, Food chemistry.

[31]  A. Chiralt,et al.  Edible films and coatings to prevent the detrimental effect of oxygen on food quality: Possibilities and limitations , 2012 .

[32]  J. Kerry,et al.  Assessment of oxygen levels in convenience‐style muscle‐based sous vide products through optical means and impact on shelf‐life stability , 2004 .

[33]  Alberto J. Palma,et al.  Determination of O2 using colour sensing from image processing with mobile devices , 2012 .

[34]  Raija Ahvenainen,et al.  Novel food Packaging techniques , 2003 .