Ionically Cross‐Linked Proton Conducting Membranes for Fuel Cells

For improving stability without sacrificing ionic conductivity, ionically cross-linked proton conducting membranes are fabricated from Na+-form sulfonated poly(phthalazinone ether sulfone kentone) (SPPESK) and H+-formed sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO). Ionically acid-base cross-linking between sulfonic acid groups in SPPO and phthalazone groups in SPPESK impart the composite membranes the good miscibility and electrochemical performance. In particular, the composite membranes possess proton conductivity of 60–110 mS cm−1 at 30 °C. By controlling the protonation degree of SPPO within 40–100 %, the composite membranes with favorable cross-linking degree are qualified for application in fuel cells. The maximum power density of the composite membrane reaches approximately 1100 mW cm−2 at the current density of 2800 mA cm−2 at 70 °C.

[1]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[2]  Liang Wu,et al.  Synthesis and properties of side-chain-type sulfonated poly(phenylene oxide) for proton exchange membranes , 2011 .

[3]  M. Ueda,et al.  Synthesis and properties of sulfonated multiblock copoly(ether sulfone)s by a chain extender , 2008 .

[4]  N. Kim,et al.  Hyperbranched poly(benzimidazole-co-benzene) with honeycomb structure as a membrane for high-temperature proton-exchange membrane fuel cells , 2010 .

[5]  J. Mcgrath,et al.  Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic–hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells , 2009 .

[6]  S. Moon,et al.  Modifying a proton conductive membrane by embedding a "barrier". , 2010, Journal of Physical Chemistry B.

[7]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[8]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[9]  Bruno Scrosati,et al.  New types of Brönsted acid-base ionic liquids-based membranes for applications in PEMFCs. , 2007, Chemphyschem : a European journal of chemical physics and physical chemistry.

[10]  Tomoya Higashihara,et al.  Locally and Densely Sulfonated Poly(ether sulfone)s as Proton Exchange Membrane , 2009 .

[11]  S. Moon,et al.  Hydrogen bonding: a channel for protons to transfer through acid-base pairs. , 2009, The journal of physical chemistry. B.

[12]  L. Cleemann,et al.  Crosslinked Hexafluoropropylidene Polybenzimidazole Membranes with Chloromethyl Polysulfone for Fuel Cell Applications , 2013 .

[13]  P. Ekdunge,et al.  Proton Conductivity of Nafion 117 as Measured by a Four‐Electrode AC Impedance Method , 1996 .

[14]  G. J Schaeffer,et al.  Fuel cell adventures. Dynamics of a technological community in a quasi-market of technological options , 1998 .

[15]  Signe Kjelstrup,et al.  Transport and equilibrium properties of Nafion® membranes with H+ and Na+ ions , 1998 .

[16]  J. Kerres,et al.  Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells , 1999 .

[17]  Dong Won Shin,et al.  Fluorene-Based Poly(arylene ether sulfone)s Containing Clustered Flexible Pendant Sulfonic Acids as Proton Exchange Membranes , 2011 .

[18]  C. Heitner-Wirguin.  Recent advances in perfluorinated ionomer membranes : structure, properties and applications , 1996 .

[19]  Qingfeng Li,et al.  Cross-Linked Polybenzimidazole Membranes for Fuel Cells , 2007 .

[20]  Xiangcun Li,et al.  Synthesis and characteristics of sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK) for direct methanol fuel cell (DMFC) , 2006 .

[21]  J. Mcgrath,et al.  Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone)s as novel proton exchange membranes – Part B , 2008 .

[22]  Ram Devanathan,et al.  Recent developments in proton exchange membranes for fuel cells , 2008 .

[23]  Hsiu-Li Lin,et al.  Poly(benzimidazole)-epoxide crosslink membranes for high temperature proton exchange membrane fuel cells , 2012 .

[24]  S. Hsu,et al.  Phosphoric acid-doped cross-linked porous polybenzimidazole membranes for proton exchange membrane fuel cells , 2011 .

[25]  Gang Zhang,et al.  Cross-linked polybenzimidazole with enhanced stability for high temperature proton exchange membrane fuel cells , 2011 .

[26]  M. Guiver,et al.  Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs) , 2011 .

[27]  M. Dresselhaus,et al.  Alternative energy technologies , 2001, Nature.

[28]  Qingfeng Li,et al.  Partially Fluorinated Arylene Polyethers and Their Ternary Blend Membranes with PBI and H3PO4. Part I. Synthesis and Characterisation of Polymers and Binary Blend Membranes , 2008 .

[29]  I. Honma,et al.  A biopolymer composite material as an anhydrous proton-conducting membrane. , 2004, Angewandte Chemie.

[30]  M. Xiao,et al.  Novel polyaromatic ionomers with large hydrophilic domain and long hydrophobic chain targeting at highly proton conductive and stable membranes , 2011 .

[31]  Zhen Yang,et al.  Copolymerization of ethylene, tetrafluoroethylene, and an olefin-containing fluorosulfonyl fluoride: synthesis of high-proton-conductive membranes for fuel-cell applications. , 2005, Angewandte Chemie.