Simulation of Broadband Noise Sources of an Axial Fan under Rotating Stall Conditions

Study on the influence of rotating stall on the aerodynamic noise of axial fan has important value to warn of the occurrence of stall through monitoring the noise variations. The present work is to analyze the aerodynamic noise before and after the phenomenon of rotating stall by solving Navier-Stokes equations, coupled with the throttle condition and the broadband noise sources model. The impeller exit rotational Mach number and rotational Reynolds number are separately 0.407 and 8.332 × 106. The results show that the aerodynamic noise source of the fan is mainly the rotation noise under the design condition. The vortex noise accounts for the major part of fan noise after the occurrence of stall, and the maximum acoustic power level of the fan appears in the rotor domains. In the evolution process from the stall inception to the stall cell, the high noise regions of the rotor develop along the radial, circumferential, and axial directions, and the area occupied by high noise regions increases from 33% to 46% impeller channels area. On rotating stall condition, the high noise regions occupying about 46% impeller channels area propagate with the stall cell along the circumferential direction at a half of rotor speed.

[1]  Sung-Eun Kim,et al.  On Predicting Aeroacoustic Performance of Ducts with Broadband Noise Source Models , 2005 .

[2]  Ali Pinarbasi,et al.  Numerical simulation of the stalled flow within a vaned centrifugal pump , 2004 .

[3]  François Avellan,et al.  Experimental Evidence of Rotating Stall in a Pump-Turbine at Off-Design Conditions in Generating Mode , 2011 .

[4]  N. Curle The influence of solid boundaries upon aerodynamic sound , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[5]  F Shen,et al.  A three-dimensional vaneless diffuser stall model , 2010 .

[6]  Zhaohui Du,et al.  Internal Flow and Noise Investigations About the Cross-Flow Fan With Different Blade Angles , 2012 .

[7]  Ivor Day,et al.  A study of spike and modal stall phenomena in a low-speed axial compressor , 1997 .

[8]  Ye Xuemi Numerical Simulation on Internal Flow Field of a Two-stage Variable Vane Axial Flow Fan , 2013 .

[9]  E. Brian Fite,et al.  Low-Speed Fan Noise Reduction with Trailing Edge Blowing , 2002 .

[10]  Matthew M. Duquette,et al.  Numerical Implications of Solidity and Blade Number on Rotor Performance of Horizontal-Axis Wind Turbines , 2003 .

[11]  Nicolas Gourdain,et al.  Simulation of rotating stall in a whole stage of an axial compressor , 2010 .

[12]  Vitaliy Yu. Nezym Use of Turning Additional Blades in Compressor Rotor , 2005 .

[13]  Lakshmi N. Sankar,et al.  Numerical Studies of Stall and Surge Alleviation in a High-Speed Transonic Fan Rotor , 2000 .

[14]  Mehdi Vahdati,et al.  Effects of Fan Speed on Rotating Stall Inception and Recovery , 2011 .

[15]  Damien Leclercq,et al.  Predicting the noise generated by a bluff body in a fluctuating flow , 2004 .

[16]  Ken Morinushi The influence of geometric parameters on F.C. centrifugal fan noise , 1987 .

[17]  I. Proudman,et al.  The generation of noise by isotropic turbulence , 1952, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[18]  Ye Xuemin Influence of Abnormal Blade Installation Angle on Aerodynamic and Acoustic Characteristics of Axial Flow Fan Under Variable Working Conditions , 2013 .

[19]  N. le S. Filleul An investigation of axial flow fan noise , 1966 .

[20]  Thomas Carolus,et al.  Axial flow fan broad-band noise and prediction , 2007 .

[21]  M. Y. Hussaini,et al.  Computation of the sound generated by isotropic turbulence , 1993 .

[22]  Gunther Brenner,et al.  Numerical Simulation and Evaluation of Velocity Fluctuations During Rotating Stall of a Centrifugal Pump , 2011 .

[23]  Rafael Ballesteros-Tajadura,et al.  Experimental determination of the tonal noise sources in a centrifugal fan , 2006 .

[24]  Perry Johnson,et al.  Broadband Noise Source Models as Aeroacoustic Tools in Designing Low NVH HVAC Ducts , 2006 .

[25]  Ivor Day,et al.  1997 Best Paper Award—Turbomachinery Committee: A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor , 1998 .

[26]  Choon‐Man Jang,et al.  Tip clearance noise of axial flow fans operating at design and off-design condition , 2004 .

[27]  Jorge Parrondo,et al.  Numerical analysis of the unsteady flow in the near-tongue region in a volute-type centrifugal pump for different operating points , 2010 .

[28]  Stefan Becker,et al.  Effect of blade wrap angle on efficiency and noise of small radial fan impellers—A computational and experimental study , 2012 .

[29]  G. Koopmann,et al.  Reduction of centrifugal fan noise by use of resonators , 1980 .

[30]  Feng Sheng,et al.  A three-dimensional compressible flow model for rotating waves in vaneless diffusers with unparallel walls , 2012 .

[31]  Geoffrey M. Lilley,et al.  THE RADIATED NOISE FROM ISOTROPIC TURBULENCE REVISITED , 1993 .

[32]  C. Santolaria Morros,et al.  Numerical prediction of tonal noise generation in an inlet vaned low-speed axial fan using a hybrid aeroacoustic approach , 2009 .

[33]  Alessandro Corsini,et al.  Using sweep to extend the stall-free operational range in axial fan rotors , 2004 .

[34]  Yingzi Jin,et al.  Effects of rotor structure on performance of small size axial flow fans , 2011 .

[35]  Yoshinobu Tsujimoto,et al.  Numerical Study of Rotating Stall in a Pump Vaned Diffuser , 2002 .