Reliability Practices for Design and Application of Space-Based MEMS

[1]  R. Howe,et al.  Critical Review: Adhesion in surface micromechanical structures , 1997 .

[2]  M. J. Cushing,et al.  Comparison of electronics-reliability assessment approaches , 1993 .

[3]  P. Lall,et al.  A physics-of-failure (POF) approach to addressing device reliability in accelerated testing of MCMs , 1995, Proceedings of 1995 IEEE Multi-Chip Module Conference (MCMC-95).

[4]  Suri Sastri,et al.  Anti-stiction coatings for MEMS service , 2004 .

[5]  Mike Davison,et al.  Processing variables for the reduction of stiction on MEMS devices , 1999, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[6]  Jeremy A. Walraven,et al.  Failure mechanisms in mems , 2003, International Test Conference, 2003. Proceedings. ITC 2003..

[7]  L. Felton,et al.  Effect of die-attach adhesives on the stress evolution in MEMS packaging , 2003 .

[8]  X. Zhang,et al.  Residual stress and fracture of thick dielectric films for power MEMS applications , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[9]  Jeremy A. Walraven,et al.  Electrostatic discharge/electrical overstress susceptibility in MEMS: a new failure mode , 2000, SPIE MOEMS-MEMS.

[10]  Seyed Allameh,et al.  An introduction to mechanical-properties-related issues in MEMS structures , 2003 .

[11]  Michael Pecht,et al.  Understanding and solving the real reliability assurance problems , 1995, Annual Reliability and Maintainability Symposium 1995 Proceedings.

[12]  Francis Pressecq,et al.  MEMS physical analysis in order to complete experimental results return , 2000, Design, Test, Integration, and Packaging of MEMS/MOEMS.

[13]  Francis Pressecq,et al.  CNES reliability approach for the qualification of MEMS for space , 2001, SPIE MOEMS-MEMS.

[14]  Lawrence E. Felton,et al.  Tailoring of Stress Development in MEMS Packaging Systems , 2002 .

[15]  Kin F. Man,et al.  MEMS reliability for space applications by elimination of potential failure modes through testing and analysis , 1999, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[16]  M. Pecht,et al.  Physics-of-failure: an approach to reliable product development , 1995, IEEE 1995 International Integrated Reliability Workshop. Final Report.

[17]  Bruce W. Dudley,et al.  MEMS reliability, process monitoring, and quality assurance , 1999, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.