Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting

[1]  Brigitte Weiss,et al.  Phase instabilities during high temperature exposure of 316 austenitic stainless steel , 1972 .

[2]  W. Kurz,et al.  Fundamentals of Solidification , 1990 .

[3]  J. Brooks,et al.  Microstructural development and solidification cracking susceptibility of austenitic stainless steel welds , 1991 .

[4]  T. Okane,et al.  Solidification microstructures selection of Fe-Cr-Ni and Fe-Ni alloys , 2001 .

[5]  P. L. Ferrandini,et al.  Solute segregation and microstructure of directionally solidified austenitic stainless steel , 2006 .

[6]  A. Esnaola,et al.  Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies , 2010 .

[7]  J. Kruth,et al.  The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts , 2011 .

[8]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[9]  Chih-Chun Hsieh,et al.  Overview of Intermetallic Sigma () Phase Precipitation in Stainless Steels , 2012 .

[10]  A. F. Padilha,et al.  Delta Ferrite Formation in Austenitic Stainless Steel Castings , 2012 .

[11]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[12]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[13]  Lucas Dembinski,et al.  The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder , 2013 .

[14]  Thomas Tröster,et al.  Highly Anisotropic Steel Processed by Selective Laser Melting , 2013, Metallurgical and Materials Transactions B.

[15]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[16]  E. Chlebus,et al.  Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology , 2014 .

[17]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[18]  Wei Qingsong,et al.  Effect of molten pool boundaries on the mechanical properties of selective laser melting parts , 2014 .

[19]  Zhijian Shen,et al.  Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting , 2015 .

[20]  Johann Sienz,et al.  Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting , 2014, The International Journal of Advanced Manufacturing Technology.

[21]  Y. Zhong,et al.  Hardened austenite steel with columnar sub-grain structure formed by laser melting , 2015 .

[22]  Alastair A. MacDowell,et al.  Damage evolution and failure mechanisms in additively manufactured stainless steel , 2016 .

[23]  Y. Zhong,et al.  Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting , 2016 .

[24]  W. Yeong,et al.  Selective laser melting of stainless steel 316L with low porosity and high build rates , 2016 .

[25]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[26]  A. Röttger,et al.  Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material , 2016 .

[27]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[28]  Maurizio Vedani,et al.  Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting , 2016 .

[29]  Yong-qiang Yang,et al.  Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts , 2016 .

[30]  J. Sienz,et al.  Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion , 2017 .

[31]  U. Ramamurty,et al.  Mechanical behavior of selective laser melted 316L stainless steel , 2017 .

[32]  A. Mclean,et al.  Effect of alloy addition on inclusion evolution in stainless steels , 2017 .