Concept for an augmented intelligence-based quality assurance of assembly tasks in global value networks

Abstract The aim of this paper is to present a conceptual approach to an augmented intelligence-based worker assistance system in manual assembly. This approach is designed to address current challenges in global value networks. We propose a self-learning multi-camera system that (1) provides augmented reality-based assembly instructions and (2) enables automated real-time in-process testing of complex manual assembly operations by using visual camera and CAD data, operational experiences and expert knowledge. As the proposed solution is targeted at enabling SMEs, cost-effectiveness is a main goal of the conceptual approach. Consequently, weak artificial intelligence is applied to realise the algorithmic chain subject to performance restricted hardware. The approach states a novelty in research and development and contributes to practical application in the field of augmented intelligence.

[1]  Engelbert Westkämper,et al.  Analytical Approach for the Examination of the Feasibility of Rework in Flow Assembly Lines , 2016 .

[2]  Ali Farhadi,et al.  You Only Look Once: Unified, Real-Time Object Detection , 2015, 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR).

[3]  Ann-Christine Falck,et al.  The impact of poor assembly ergonomics on product quality: A cost–benefit analysis in car manufacturing , 2010 .

[4]  Detlef Zühlke,et al.  A System Architecture for Assistance in Manual Tasks , 2016, Intelligent Environments.

[5]  Robert Schmitt,et al.  Conceptual Approach to Integrated Human-Centered Performance Management on the Shop Floor , 2018 .

[6]  Sebastian Büttner,et al.  Exploring Design Opportunities for Intelligent Worker Assistance: A New Approach Using Projetion-Based AR and a Novel Hand-Tracking Algorithm , 2017, AmI.

[7]  Hans-Peter Kriegel,et al.  A Density-Based Algorithm for Discovering Clusters in Large Spatial Databases with Noise , 1996, KDD.

[8]  Thomas Schlegl,et al.  Smart Workbench: A multimodal and bidirectional assistance system for industrial application , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.

[9]  J. Gausemeier,et al.  Industrie 4 . 0 in a Global Context Strategies for Cooperating with International Partners , 2016 .

[10]  Marian Kelley,et al.  One size does not fit all. , 2011, Bioanalysis.

[11]  Paulo Dias,et al.  Comparing Spatial and Mobile Augmented Reality for Guiding Assembling Procedures with Task Validation , 2019, 2019 IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC).

[12]  A. Schmidt,et al.  motionEAP : An Overview of 4 Years of Combining Industrial Assembly with Augmented Reality for Industry 4 . 0 , 2016 .

[13]  Sebastian Wrede,et al.  Interactive Learning of Assembly Processes using Digital Assistance , 2019 .

[14]  R. Klevit,et al.  One size does not fit all: The oligomeric states of αB crystallin , 2013, FEBS letters.

[15]  Jürgen Beyerer,et al.  Smart Information Visualization for First-Time Quality within the Automobile Production Assembly Line , 2018 .

[16]  Nanning Zheng,et al.  Hybrid-augmented intelligence: collaboration and cognition , 2017, Frontiers of Information Technology & Electronic Engineering.

[17]  Ann-Christine Falck,et al.  The impact of poor assembly ergonomics on product quality: A cost-benefit analysis in car manufacturing: Poor Assembly Ergonomics and Product Quality , 2010 .

[18]  Robert Schmitt,et al.  Aligning the Social Perspective with the Technical Vision of the Smart Factory , 2018, Advances in Production Research.

[19]  Choon Ki Ahn,et al.  Camera Position Estimation for UAVs Using SolvePnP with Kalman Filter , 2018, 2018 1st IEEE International Conference on Hot Information-Centric Networking (HotICN).

[20]  Sascha Wischniewski,et al.  Evaluation of Assistance Systems for Manual Assembly Work , 2019, 2019 IEEE/SICE International Symposium on System Integration (SII).

[21]  Renato Vidoni,et al.  Requirements for the Design of Flexible and Changeable Manufacturing and Assembly Systems: A SME-survey , 2016 .

[22]  Stefan Sauer,et al.  A Human-Centered Perspective on Software Quality: Acceptance Criteria for Work 4.0 , 2017, HCI.

[23]  Steffen Kinkel,et al.  Globale Produktion von einer starken Heimatbasis aus: Verlagerungsaktivitäten deutscher Unternehmen auf dem Tiefstand , 2013 .

[24]  刘 子熠,et al.  Hybrid-augmented intelligence: collaboration and cognition , 2017, Frontiers of Information Technology & Electronic Engineering.

[25]  Yu Xiao,et al.  Unsupervised Workflow Extraction from First-Person Video of Mechanical Assembly , 2018, HotMobile.