A probabilistic approach to generation maintenance scheduler with network constraints

Abstract Most generating unit maintenance scheduling packages consider the preventive maintenance schedule of generating units over a one or two year operational planning period in order to minimize the total operating cost while satisfying system energy requirements and maintenance constraints. In a global maintenance scheduling problem, we propose to consider network constraints and generating unit outages in generation maintenance scheduling. The inclusion of network constraints in generating unit maintenance will increase the complexity of the problem, so we decompose the global generator scheduling problem into a master problem and sub-problems using Benders decomposition. At the first stage, a master problem is solved to determine a solution for maintenance schedule decision variables. In the second stage, sub-problems are solved to minimize operating costs while satisfying network constraints and generators’ forced outages. Benders cuts based on the solution of the sub-problem are introduced to the master problem for improving the existing solution. The iterative procedure continues until an optimal or near optimal solution is found.

[1]  H.H. Zurn,et al.  Generator maintenance scheduling via successive approximations dynamic programming , 1975, IEEE Transactions on Power Apparatus and Systems.

[2]  Junichi Toyoda,et al.  Optimal generating unit maintenance scheduling for multi-area system with network constraints , 1991 .

[3]  M. Morozowski,et al.  Transmission constrained maintenance scheduling of generating units: a stochastic programming approach , 1995 .

[4]  Chanan Singh,et al.  A new approach to reliability evaluation of interconnected power systems including planned outages and frequency calculations , 1992 .

[5]  A. H. Palmer,et al.  A Technique for the Automated Scheduling of the Maintenance of Generating Facilities , 1972 .

[6]  K. Hara,et al.  A Method for Planning Economic Unit Commitment and Maintenance of Thermal Power Systems , 1966 .

[7]  Probability Subcommittee,et al.  IEEE Reliability Test System , 1979, IEEE Transactions on Power Apparatus and Systems.

[8]  Jeremy A. Bloom,et al.  Solving an Electricity Generating Capacity Expansion Planning Problem by Generalized Benders' Decomposition , 1983, Oper. Res..

[9]  Leon S. Lasdon,et al.  Optimization Theory of Large Systems , 1970 .

[10]  M. F. Pereira,et al.  A Decomposition Approach To Automated Generation/Transmission Expansion Planning , 1985, IEEE Transactions on Power Apparatus and Systems.

[11]  Mohammad Shahidehpour,et al.  The IEEE Reliability Test System-1996. A report prepared by the Reliability Test System Task Force of the Application of Probability Methods Subcommittee , 1999 .

[12]  Jay Yellen,et al.  A decomposition approach to unit maintenance scheduling , 1992 .

[13]  L. L. Garver,et al.  Adjusting Maintenance Schedules to Levelize Risk , 1972 .

[14]  Tharam S. Dillon,et al.  An Experimental Method of Determination of Optimal Maintenance Schedules in Power Systems Using the Branch-and-Bound Technique , 1976, IEEE Transactions on Systems, Man, and Cybernetics.

[15]  J.F. Dopazo,et al.  Optimal generator maintenance scheduling using integer programming , 1975, IEEE Transactions on Power Apparatus and Systems.