Enhanced strength and ductility of the low-carbon steel with heterogeneous lamellar dual-phase structure produced by cyclic intercritical rolling

[1]  Min Song,et al.  Superior strength–ductility combination in Al alloys via dislocation gradient structure , 2022, Materials Research Letters.

[2]  Peng Wang,et al.  Prominent role of reversed austenite on corrosion property of super 13Cr martensitic stainless steel , 2022, Journal of Materials Research and Technology.

[3]  P. Peng,et al.  Simultaneous improvement of strength and ductility in ZK60 magnesium alloy by constructing the bimodal grain structure , 2022, Journal of Materials Research and Technology.

[4]  Hong Wang,et al.  High strength and high ductility achieved in a heterogeneous lamella-structured magnesium alloy , 2022, Materials Research Letters.

[5]  D. Xiong,et al.  Simultaneously enhanced strength and ductility in graphene nanosheet/Al-Cu-Mg nano-laminated composites by incorporating coarse domains , 2022, Materials Research Letters.

[6]  I. Beyerlein,et al.  Heterostructured stainless steel: Properties, current trends, and future perspectives , 2022, Materials Science and Engineering: R: Reports.

[7]  Hao Zhou,et al.  Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy , 2022, Journal of Materials Research and Technology.

[8]  K. Ameyama,et al.  Harmonic structure, a promising microstructure design , 2022, Materials Research Letters.

[9]  Z. Cai,et al.  The Effect of Vanadium Content on Hierarchical Martensite Structure and Yield Strength of Petroleum Casing Steels , 2022, SSRN Electronic Journal.

[10]  Baocai Yin,et al.  Tracking the sliding of grain boundaries at the atomic scale , 2022, Science.

[11]  P. Guan,et al.  Direct Atomic-Scale Observation of Ultrasmall Ag Nanowires that Exhibit fcc, bcc, and hcp Structures under Bending. , 2022, Physical review letters.

[12]  F. Yuan,et al.  Enhanced tensile properties by heterogeneous grain structures and coherent precipitates in a CoCrNi-based medium entropy alloy , 2022, Materials Science and Engineering: A.

[13]  Chong-xiang Huang,et al.  Mechanical response of the constrained nanostructured layer in heterogeneous laminate , 2022, Scripta Materialia.

[14]  Y. Liu,et al.  Dual-phase hetero-structured strategy to improve ductility of a low carbon martensitic steel , 2021, Materials Science and Engineering: A.

[15]  Jianfeng Wang,et al.  Revolutionizing car body manufacturing using a unified steel metallurgy concept , 2021, Science advances.

[16]  Chong-xiang Huang,et al.  Activating dispersed strain bands in tensioned nanostructure layer for high ductility: the effects of microstructure inhomogeneity , 2021, International Journal of Plasticity.

[17]  C. Tasan,et al.  In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: Slip mechanisms, strain localization, and partitioning , 2021, International Journal of Plasticity.

[18]  Xiaolei Wu,et al.  Heterostructured Materials , 2021, Progress in Materials Science.

[19]  Yuntian Zhu.  Introduction to Heterostructured Materials: A Fast Emerging Field , 2021, Metallurgical and Materials Transactions A.

[20]  Y. Chew,et al.  Additive manufacturing of multi-scale heterostructured high-strength steels , 2021 .

[21]  Fucheng Zhang,et al.  Strain-hardening behavior and mechanisms of a lamellar-structured low-alloy TRIP steel , 2021, Materials Science and Engineering: A.

[22]  Li Jin,et al.  Simultaneously improving strength and ductility through laminate structure design in Mg–8.0Gd–3.0Y-0.5Zr alloys , 2021 .

[23]  Xuefei Chen,et al.  Strengthening and ductilization of laminate dual-phase steels with high martensite content , 2021 .

[24]  Q. Lu,et al.  Mesoscopic origin of damage nucleation in dual-phase steels , 2021 .

[25]  M. Herbig,et al.  Carbon redistribution in quenched and tempered lath martensite , 2021 .

[26]  Xiaolei Wu,et al.  Heterogeneous materials: a new class of materials with unprecedented mechanical properties , 2017, Heterostructured Materials.

[27]  Huajian Gao,et al.  Heterostructured materials: superior properties from hetero-zone interaction , 2020, Materials Research Letters.

[28]  R. Soltani,et al.  Improved properties of dual-phase steel via pre-intercritical annealing treatment and thermal cycling , 2020 .

[29]  Xiaolei Wu,et al.  Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling , 2020, Science Advances.

[30]  B. Ögel,et al.  Recrystallization, grain growth and austenite formation in cold rolled steels during intercritical annealing , 2020 .

[31]  Zhen-bao Liu,et al.  Influence of refined hierarchical martensitic microstructures on yield strength and impact toughness of ultra-high strength stainless steel , 2020 .

[32]  Dianzhong Li,et al.  Effect of matrix carbon content and lath martensite microstructures on the tempered precipitates and impact toughness of a medium-carbon low-alloy steel , 2020 .

[33]  Chong-xiang Huang,et al.  Shear band stability and uniform elongation of gradient structured material: Role of lateral constraint , 2020 .

[34]  Q. Lu,et al.  Lognormal Distribution of Local Strain: A Universal Law of Plastic Deformation in Material. , 2020, Physical review letters.

[35]  F. Qiu,et al.  Simultaneously increased strength and ductility via the hierarchically heterogeneous structure of Al-Mg-Si alloys/nanocomposite , 2020 .

[36]  M. Shamsujjoha,et al.  Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels , 2020 .

[37]  R. Scattergood,et al.  Dense dispersed shear bands in gradient-structured Ni , 2020, International Journal of Plasticity.

[38]  Xin-bo Ji,et al.  An ultrahigh-strength steel produced by heavy warm rolling of the metastable austenite , 2019 .

[39]  X. Wang,et al.  Effect of bainite morphology on deformation compatibility of mesostructure in ferrite/bainite dual-phase steel: Mesostructure-based finite element analysis , 2019, Materials & Design.

[40]  Yang Cao,et al.  A high-strength heterogeneous structural dual-phase steel , 2019, Journal of Materials Science.

[41]  Y. Mazaheri,et al.  Correlation of ferrite and martensite micromechanical behavior with mechanical properties of ultrafine grained dual phase steels , 2019, Materials Science and Engineering: A.

[42]  Xiaolei Wu,et al.  Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.

[43]  Sheng-wu Guo,et al.  A low-alloy high-carbon martensite steel with 2.6 GPa tensile strength and good ductility , 2018, Acta Materialia.

[44]  Y. F. Wang,et al.  Interface affected zone for optimal strength and ductility in heterogeneous laminate , 2018, Materials Today.

[45]  H. Mirzadeh,et al.  Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite , 2018, Vacuum.

[46]  R. Misra,et al.  Effect of volume fraction of bainite on strain hardening behavior and deformation mechanism of F/B multi-phase steel , 2018, Materials Science and Engineering: A.

[47]  Xiaolei Wu,et al.  Ductility and Plasticity of Nanostructured Metals: Differences and Issues , 2018, Heterostructured Materials.

[48]  H. Mirzadeh,et al.  Refinement of Banded Structure via Thermal Cycling and Its Effects on Mechanical Properties of Dual Phase Steel , 2018 .

[49]  Zhengyi Jiang,et al.  Thermomechanical processing of advanced high strength steels , 2018 .

[50]  H. Yen,et al.  Coopetitive micro-mechanisms between recrystallization and transformation during/after dynamic strain-induced transformation in aluminum-containing low-carbon steel , 2017 .

[51]  A. Shan,et al.  Effect of heavy warm rolling on microstructures and mechanical properties of AISI 4140 steel , 2017 .

[52]  G. Sha,et al.  Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy , 2017, Metallurgical and Materials Transactions A.

[53]  E. Ghassemali,et al.  Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels , 2016 .

[54]  M. Santofimia,et al.  Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite , 2016, Metallurgical and Materials Transactions A.

[55]  O. Bouaziz,et al.  Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel , 2016, Metallurgical and Materials Transactions A.

[56]  Thomas Pardoen,et al.  Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: Experiments and micromechanical modeling , 2016 .

[57]  F. Yuan,et al.  Back stress strengthening and strain hardening in gradient structure , 2016 .

[58]  F. Yuan,et al.  Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility , 2015, Proceedings of the National Academy of Sciences.

[59]  D. Chakrabarti,et al.  Development of Ultrafine-Grained Dual-Phase Steels: Mechanism of Grain Refinement During Intercritical Deformation , 2013, Metallurgical and Materials Transactions A.

[60]  Saeed Ziaei-Rad,et al.  Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels , 2011 .

[61]  B. Eghbali.  Study on the ferrite grain refinement during intercritical deformation of a microalloyed steel , 2010 .

[62]  V. Colla,et al.  Strain Hardening Behavior of Dual-Phase Steels , 2009 .

[63]  B. Eghbali,et al.  Deformation-induced ferrite transformation in a low carbon Nb–Ti microalloyed steel , 2007 .

[64]  Han Dong,et al.  Deformation induced ferrite transformation in low carbon steels , 2005 .

[65]  Yuichiro Koizumi,et al.  Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite , 2002 .

[66]  J. Hutchinson.  Plasticity at the micron scale , 2000 .

[67]  Huajian Gao,et al.  Mechanism-based strain gradient plasticity— I. Theory , 1999 .