Zero Poisson's ratio PTFE in uniaxial extension

[1]  Cong-jie Gao,et al.  Preparation and properties of porous polytetrafluoroethylene hollow fiber membrane through mechanical operations , 2015 .

[2]  M. Ansari,et al.  Paste Extrusion and Mechanical Properties of PTFE , 2015 .

[3]  A. Rahimi,et al.  Lubricant facilitated thermo-mechanical stretching of PTFE and morphology of the resulting membranes , 2014 .

[4]  Hesam Anvari Ardakani,et al.  Rheology of pastes : effects of fibrillation, thixotropy and structure , 2014 .

[5]  J. Reis,et al.  Influence of the temperature and strain rate on the tensile behavior of post-consumer recycled high-density polyethylene , 2013 .

[6]  G. Heinrich,et al.  Relationship between Structure and Mechanical Properties of Melt Processable PTFE: Influence of Molecular Weight and Comonomer Content , 2013 .

[7]  E. Mitsoulis,et al.  Polytetrafluoroethylene Paste Extrusion: A Fibrillation Model and Its Relation to Mechanical Properties , 2013 .

[8]  E. Mitsoulis,et al.  A simple improved mathematical model for polytetrafluoroethylene (PTFE) paste extrusion , 2013 .

[9]  E. Mitsoulis,et al.  Capillary flow of low-density polyethylene , 2012 .

[10]  Huaping Wang,et al.  Melt processability of polytetrafluoroethylene: Effect of melt treatment on tensile deformation mechanism , 2012 .

[11]  Xiaoqing Zhang,et al.  Mechanical and electrical properties of laminated polytetrafluoroethylene films , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[12]  J. Spruiell,et al.  Structure development in multistage stretching of PTFE films , 2010 .

[13]  S. Syrjälä,et al.  Measurement technique and data analysis of extensional viscosity for polymer melts by Sentmanat extensional rheometer (SER) , 2010 .

[14]  S. Chen,et al.  Pore size control of PTFE membranes by stretch operation with asymmetric heating system , 2008 .

[15]  Shi‐Qing Wang,et al.  From elastic deformation to terminal flow of a monodisperse entangled melt in uniaxial extension , 2008 .

[16]  S. Hatzikiriakos,et al.  Thermorheological properties of LLDPE/LDPE blends , 2008 .

[17]  L. J. Lee,et al.  Paste extrusion control and its influence on pore size properties of PTFE membranes , 2007 .

[18]  James J. Feng,et al.  Constitutive modeling and flow simulation of polytetrafluoroethylene (PTFE) paste extrusion , 2006 .

[19]  E. Mitsoulis,et al.  Paste Extrusion of Polytetrafluoroethylene: Temperature, Blending and Processing Aid Effects , 2006 .

[20]  I. Ochoa.  Paste extrusion of polytetrafluoroethylene (PTFE) fine powder resin : the effects of processing aid physical properties , 2006 .

[21]  S. Hatzikiriakos,et al.  Paste extrusion of polytetrafluoroethylene (PTFE): Surface tension and viscosity effects , 2005 .

[22]  E. Brown,et al.  The properties of poly(tetrafluoroethylene) (PTFE) in tension , 2004 .

[23]  S. Hatzikiriakos,et al.  Polytetrafluoroethylene paste preforming: viscosity and surface tension effects , 2004 .

[24]  M. Sentmanat.  Miniature universal testing platform: from extensional melt rheology to solid-state deformation behavior , 2004 .

[25]  S. Hatzikiriakos,et al.  Paste Extrusion of Polytetrafluoroethylene (PTFE) Fine Powder Resins , 2002 .

[26]  P. Mallick,et al.  Effects of temperature and strain rate on the tensile behavior of short fiber reinforced polyamide-6 , 2002 .

[27]  S. Hatzikiriakos,et al.  Properties of polytetrafluoroethylene (PTFE) paste extrudates , 2002 .

[28]  S. Hatzikiriakos,et al.  Preforming behavior of polytetrafluoroethylene paste , 2001 .

[29]  K. Kurumada,et al.  Structure generation in PTFE porous membranes induced by the uniaxial and biaxial stretching operations , 1998 .

[30]  R. Porter,et al.  Uniaxial drawing of polytetrafluoroethylene virgin powder by extrusion plus cold tensile draw , 1998 .

[31]  B. D. Caddock,et al.  Microporous materials with negative Poisson's ratios. I. Microstructure and mechanical properties , 1989 .

[32]  A. Włochowicz,et al.  Effect of molecular weight on the mechanical properties of polytetrafluoroethylene (PTFE) , 1989 .

[33]  J. Collier,et al.  Solid state extrusion of polytetrafluoroethylene fibers , 1986 .

[34]  C. Coleman.  The effect of extrusion on the mechanical properties of polytetrafluoroethylene paste , 1978 .

[35]  R. D. Andrews,et al.  Mechanical behavior of polytetrafluoroethylene around the room‐temperature first‐order transition , 1969 .

[36]  C. Speerschneider,et al.  A Correlation of Mechanical Properties and Microstructure of Polytetrafluoroethylene at Various Temperatures , 1963 .