A uni-directional ring-slot antenna achieved by using an electromagnetic band-gap surface

Slot antennas offer a number of advantages including low-profile, ease of fabrication, and ease of integration with electronics. Their main drawback, however, is that they are inherently bi-directional radiators. One common technique to redirect the back radiation forward is to place a conducting reflector at a fixed distance away from the antenna. This distance is usually chosen to be a quarter wavelength so that the reflected back radiation incurs an additional phase of 360/spl deg/ and thus adds in phase with the forward directed radiation. However, in this case the parallel-plate geometry permits the excitation of the dominant transverse electromagnetic mode, which drastically reduces the overall radiation efficiency. This work describes a solution to this problem and shows how to achieve uni-directional slot antenna elements by backing them with an electromagnetic band-gap surface, instead of the uniform conducting reflector. This structure, when operated in its band-gap, inhibits the propagation of electromagnetic waves over all possible azimuthal directions, in the region between the antenna ground plane and the periodic surface.

[1]  Gabriel M. Rebeiz.  Millimeter-wave and terahertz integrated circuit antennas , 1992, Proc. IEEE.

[2]  L. Brillouin,et al.  Wave Propagation in Periodic Structures , 1946 .

[3]  Tatsuo Itoh,et al.  A novel TEM waveguide using uniplanar compact photonic-bandgap (UC-PBG) structure , 1999 .

[4]  Dean P. Neikirk,et al.  Use of broadside twin element antennas to increase efficiency on electrically thick dielectric substrates , 1988 .

[5]  L. Katehi,et al.  Parallel-plate mode reduction in conductor-backed slots using electromagnetic bandgap substrates , 1999 .

[6]  Gabriel M. Rebeiz,et al.  Self and mutual admittance of slot antennas on a dielectric half-space , 1993 .

[7]  George V. Eleftheriades,et al.  High-gain meanderless slot arrays on electrically thick substrates at millimeter-wave frequencies , 2002 .

[8]  Y. Yoshimura.  A Microstripline Slot Antenna (Short Papers) , 1972 .

[9]  Y. Qian,et al.  An improved low-profile cavity-backed slot antenna loaded with 2D UC-PBG reflector , 2001, IEEE Antennas and Propagation Society International Symposium. 2001 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.01CH37229).

[10]  George V. Eleftheriades,et al.  Efficiency and gain of slot antennas and arrays on thick dielectric substrates for millimeter-wave applications: a unified approach , 2002 .

[11]  George V. Eleftheriades,et al.  Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuits , 2003 .

[12]  D. Sievenpiper,et al.  High-impedance electromagnetic surfaces with a forbidden frequency band , 1999 .