An fast Fourier transform–based correlation coefficient approach for structural damage diagnosis

We present a novel approach to evaluating mechanical features of structures using correlation coefficients and fast Fourier transform analysis. Although correlation coefficient is always a sensitiv...

[1]  Zhichun Yang,et al.  On the cross correlation function amplitude vector and its application to structural damage detection , 2007 .

[2]  Shirley J. Dyke,et al.  Structural health monitoring for flexible bridge structures using correlation and sensitivity of modal data , 2007 .

[3]  Bo Alfredsson,et al.  Fretting fatigue of a shrink-fit pin subjected to rotating bending : Experiments and simulations , 2009 .

[4]  Timothy P. Waters,et al.  Structural damage detection using cross correlation functions of vibration response , 2010 .

[5]  Seok-Jin Kwon,et al.  Characterization of fretting damage in a press-fitted shaft below the fretting fatigue limit , 2010 .

[6]  Marie-Christine Baietto,et al.  A multi-model X-FEM strategy dedicated to frictional crack growth under cyclic fretting fatigue loadings , 2010 .

[7]  Noel M. Harrison,et al.  A finite element methodology for wear–fatigue analysis for modular hip implants , 2013 .

[8]  Xian‐Fang Li,et al.  Exact frequency equations of free vibration of exponentially functionally graded beams , 2013 .

[9]  D. Hills,et al.  Mechanics of fretting fatigue—Oxford's contribution , 2014 .

[10]  K. Asai.  Experimental validation of a fracture-mechanics model for evaluating fretting-fatigue strength by focusing on non-propagating cracks , 2014 .

[11]  Leonardo Bertini,et al.  Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling , 2015 .

[12]  S. Fouvry,et al.  FEM modeling of crack nucleation and crack propagation fretting fatigue maps: Plasticity effect , 2015 .

[13]  Lizhi Sun,et al.  Dynamical behavior of a double-beam system interconnected by a viscoelastic layer , 2016 .

[14]  Timon Rabczuk,et al.  Detection of material interfaces using a regularized level set method in piezoelectric structures , 2016 .

[15]  M. Luke,et al.  Experimental and numerical study on crack initiation under fretting fatigue loading , 2016 .

[16]  N. T. Khiem,et al.  Frequency response of a beam-like structure to moving harmonic forces , 2016 .

[17]  Jung Youn Lee,et al.  Free vibration analysis using the transfer-matrix method on a tapered beam , 2016 .

[18]  T. Zeng,et al.  Free vibration of two-directional functionally graded beams , 2016 .

[19]  S. Beretta,et al.  Defect acceptability under full-scale fretting fatigue tests for railway axles , 2016 .

[20]  Shougen Zhao,et al.  Vibration and buckling analysis of double-functionally graded Timoshenko beam system on Winkler-Pasternak elastic foundation , 2017 .

[21]  Jung Woo Lee,et al.  Free vibration analysis of functionally graded Bernoulli-Euler beams using an exact transfer matrix expression , 2017 .

[22]  Yang Zhao,et al.  A novel approach for free vibration of axially functionally graded beams with non-uniform cross-section based on Chebyshev polynomials theory , 2017 .

[23]  Danhui Dan,et al.  An exact solution for dynamic analysis of a complex double-beam system , 2018, Composite Structures.

[24]  M. Wahab,et al.  Fretting fatigue crack nucleation: A review , 2018 .

[25]  L. Lu,et al.  Finite element simulation of the influence of fretting wear on fretting crack initiation in press-fitted shaft under rotating bending , 2018 .

[26]  N. Khiem,et al.  Analysis and identification of multiple-cracked beam subjected to moving harmonic load , 2018 .

[27]  N. T. Khiem,et al.  A closed-form solution to the problem of crack identification for a multistep beam based on Rayleigh quotient , 2018, International Journal of Solids and Structures.

[28]  Han Fei,et al.  Analysis on the dynamic characteristic of a tensioned double-beam system with a semi theoretical semi numerical method , 2018 .

[29]  Wei Zhang,et al.  Free vibration of axially functionally graded beams using the asymptotic development method , 2018, Engineering Structures.

[30]  J. Banerjee,et al.  Free vibration of functionally graded beams and frameworks using the dynamic stiffness method , 2018 .

[31]  Jung Youn Lee,et al.  An exact transfer matrix expression for bending vibration analysis of a rotating tapered beam , 2018 .

[32]  A. Obradovic,et al.  Free vibration analysis of axially functionally graded tapered, stepped, and continuously segmented rods and beams , 2018, Composites Part B: Engineering.

[33]  M. Wahab,et al.  Fretting fatigue damage nucleation under out of phase loading using a continuum damage model for non-proportional loading , 2018 .

[34]  Armagan Karamanli.  Free vibration analysis of two directional functionally graded beams using a third order shear deformation theory , 2018 .

[35]  Danhui Dan,et al.  Exact dynamic characteristic analysis of a double-beam system interconnected by a viscoelastic layer , 2019, Composites Part B: Engineering.

[36]  M. Yao,et al.  Analytical analysis of free vibration of non-uniform and non-homogenous beams: Asymptotic perturbation approach , 2019, Applied Mathematical Modelling.

[37]  Bingen Yang,et al.  A closed-form analytical solution method for vibration analysis of elastically connected double-beam systems , 2019, Composite Structures.

[38]  Naif Alajlan,et al.  Artificial Neural Network Methods for the Solution of Second Order Boundary Value Problems , 2019, Computers, Materials & Continua.

[39]  L. Lu,et al.  Fretting wear and fatigue in press-fitted railway axle: A simulation study of the influence of stress relief groove , 2019, International Journal of Fatigue.

[40]  Hung Nguyen-Xuan,et al.  Balancing composite motion optimization , 2020, Inf. Sci..