Probing interfacial electrochemistry by in situ atomic force microscope for battery characterization

Lithium‐ion batteries (LIBs) have been widely used in electric vehicles and energy storage industries. An understanding of the reaction processes and degradation mechanism in LIBs is crucial for optimizing their performance. In situ atomic force microscopy (AFM) as a surface‐sensitive tool has been applied in the real‐time monitoring of the interfacial processes within lithium batteries. Here, we reviewed the recent progress of the application of in situ AFM for battery characterizations, including LIBs, lithium–sulfur batteries, and lithium–oxygen batteries. We summarized advances in the in situ AFM for recording electrode/electrolyte interface, mechanical properties, morphological changes, and surface evolution. Future directions of in situ AFM for the development of lithium batteries were also discussed in this review.

[1]  Luyi Yang,et al.  Surface Defects Reinforced Polymer‐Ceramic Interfacial Anchoring for High‐Rate Flexible Solid‐State Batteries , 2023, Advanced Functional Materials.

[2]  Zhuangnan Li,et al.  Lithiated metallic molybdenum disulfide nanosheets for high-performance lithium–sulfur batteries , 2023, Nature Energy.

[3]  Chaoyang Wang,et al.  Fast charging of energy-dense lithium-ion batteries , 2022, Nature.

[4]  Yu‐Guo Guo,et al.  Surface Degradation of Single-crystalline Ni-rich Cathode and Regulation Mechanism by Atomic Layer Deposition in Quasi-Solid-State Lithium Batteries. , 2022, Angewandte Chemie.

[5]  Xianluo Hu,et al.  The pursuit of commercial silicon-based microparticle anodes for advanced lithium-ion batteries: A review , 2022, Nano Research Energy.

[6]  Shanqing Zhang,et al.  Evolving aprotic Li-air batteries. , 2022, Chemical Society reviews.

[7]  Xiaodi Ren,et al.  Molecular understanding of interphase formation via operando polymerization on lithium metal anode , 2022, Cell Reports Physical Science.

[8]  Luyi Yang,et al.  Intermolecular Chemistry for Designing Functional Binders in Silicon/Carbon Composite Anodes , 2022, Materials Today Energy.

[9]  Yu‐Guo Guo,et al.  Direct Tracking of Additive‐Regulated Evolution on the Lithium Anode in Quasi‐Solid‐State Lithium–Sulfur Batteries , 2022, Advanced Energy Materials.

[10]  R. Wen,et al.  In Situ Visualization of Electrochemical Processes in Solid-State Lithium Batteries , 2022, ACS Energy Letters.

[11]  Zhaoping Liu,et al.  Revealing the Cathode Electrolyte Interphase on Li- and Mn-rich Materials by In-situ Electrochemical Atomic Force Microscopy , 2022, Applied Surface Science.

[12]  Z. Seh,et al.  Understanding the Cathode‐Electrolyte Interphase in Lithium‐Ion Batteries , 2022, Energy Technology.

[13]  A. Nwanya,et al.  Anode materials for lithium-ion batteries: A review , 2022, Applied Surface Science Advances.

[14]  N. Fleck,et al.  Mechanical properties of cathode materials for lithium-ion batteries , 2022, Joule.

[15]  Su Yeon Lee,et al.  Real-Time Observation of Mechanical Evolution of Micro-Sized Si Anodes by In Situ Atomic Force Microscopy , 2022, ACS Materials Letters.

[16]  R. Wen,et al.  Revealing the Correlations between Morphological Evolution and Surface Reactivity of Catalytic Cathodes in Lithium-Oxygen Batteries. , 2021, Journal of the American Chemical Society.

[17]  X. Qin,et al.  Promoting the reversibility of lithium ion/lithium metal hybrid graphite anode by regulating solid electrolyte interface , 2021, Nano Energy.

[18]  Yongbing Tang,et al.  Interface engineering toward high‐efficiency alloy anode for next‐generation energy storage device , 2021, EcoMat.

[19]  Gui-Cheng Liu,et al.  Dual impact of superior SEI and separator wettability to inhibit lithium dendrite growth , 2021, Rare Metals.

[20]  Yu‐Guo Guo,et al.  Insights into the nitride-regulated processes at the electrolyte/electrode interface in quasi-solid-state lithium-metal batteries , 2021, Journal of Energy Chemistry.

[21]  Qingliang Liao,et al.  In situ microscopy techniques for characterizing the mechanical properties and deformation behavior of two-dimensional (2D) materials , 2021, Materials Today.

[22]  W. Kays,et al.  From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing. , 2021, Chemical reviews.

[23]  Shi-gang Lu,et al.  Interface stabilization of 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether to high-voltage Li-rich Mn-based layered cathode materials , 2021, Rare Metals.

[24]  Shiwen Li,et al.  Electrolyte-dependent formation of solid electrolyte interphase and ion intercalation revealed by in situ surface characterizations , 2021, Journal of Energy Chemistry.

[25]  L. Wan,et al.  Insights into evolution processes and degradation mechanisms of anion-tunable interfacial stability in all-solid-state lithium-sulfur batteries , 2021 .

[26]  Erik A. Wu,et al.  Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes , 2021, Science.

[27]  Rui Zhang,et al.  The carrier transition from Li atoms to Li vacancies in solid-state lithium alloy anodes , 2021, Science advances.

[28]  Huisheng Peng,et al.  Scalable production of high-performing woven lithium-ion fibre batteries , 2021, Nature.

[29]  D. Brett,et al.  Characterizing Batteries by In Situ Electrochemical Atomic Force Microscopy: A Critical Review , 2021, Advanced Energy Materials.

[30]  Luyi Yang,et al.  PIM‐1 as a Multifunctional Framework to Enable High‐Performance Solid‐State Lithium–Sulfur Batteries , 2021, Advanced Functional Materials.

[31]  Xin Chen,et al.  In Situ Characterization of Over-Lithiation of Organosulfide-Based Lithium Metal Anodes. , 2021, ACS applied materials & interfaces.

[32]  Yuki Yamada,et al.  Frontiers in Theoretical Analysis of Solid Electrolyte Interphase Formation Mechanism , 2021, Advanced materials.

[33]  J. Shapter,et al.  Recent progress of advanced anode materials of lithium-ion batteries , 2021 .

[34]  H. Weinstein,et al.  Localization atomic force microscopy , 2021, Nature.

[35]  Jihong Yu,et al.  A highly stable and flexible zeolite electrolyte solid-state Li–air battery , 2021, Nature.

[36]  Baohua Li,et al.  Effect of Fluoroethylene Carbonate on Solid Electrolyte Interphase Formation of the SiO/C Anode Observed by In Situ Atomic Force Microscopy , 2021 .

[37]  Yu‐Guo Guo,et al.  Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution. , 2020, Journal of the American Chemical Society.

[38]  Yu‐Guo Guo,et al.  Dynamic Evolution of a Cathode Interphase Layer at the Surface of LiNi0.5Co0.2Mn0.3O2 in Quasi-Solid-State Lithium Batteries. , 2020, Journal of the American Chemical Society.

[39]  G. Hummer,et al.  Atomic Force Microscopy-Based Force Spectroscopy and Multiparametric Imaging of Biomolecular and Cellular Systems. , 2020, Chemical reviews.

[40]  Hao Yan,et al.  Evaluating Solid-Electrolyte Interphases for Lithium and Lithium-free Anodes from Nanoindentation Features , 2020, Chem.

[41]  Tongchao Liu,et al.  A disordered rock salt anode for fast-charging lithium-ion batteries , 2020, Nature.

[42]  L. Wan,et al.  Surface Mechanism of Catalyst in Lithium-Oxygen Batteries: How Nanostructures Mediate the Interfacial Reactions. , 2020, Journal of the American Chemical Society.

[43]  Ricardo Garcia.  Nanomechanical mapping of soft materials with the atomic force microscope: methods, theory and applications. , 2020, Chemical Society reviews.

[44]  D. Brett,et al.  Operando Electrochemical Atomic Force Microscopy of Solid–Electrolyte Interphase Formation on Graphite Anodes: The Evolution of SEI Morphology and Mechanical Properties , 2020, ACS applied materials & interfaces.

[45]  V. Wood,et al.  Spontaneous and reversible hollowing of alloy anode nanocrystals for stable battery cycling , 2020, Nature Nanotechnology.

[46]  Xiulin Fan,et al.  Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries , 2020, Nature Energy.

[47]  T. Ichitsubo,et al.  Circumventing huge volume strain in alloy anodes of lithium batteries , 2020, Nature Communications.

[48]  Jaephil Cho,et al.  Cyclic Aminosilane‐Based Additive Ensuring Stable Electrode–Electrolyte Interfaces in Li‐Ion Batteries , 2020, Advanced Energy Materials.

[49]  Jing Luo,et al.  Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design. , 2020, Chemical Society reviews.

[50]  C. Grey,et al.  Current Challenges and Routes Forward for Nonaqueous Lithium-Air Batteries. , 2020, Chemical reviews.

[51]  Yan Yu,et al.  Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries. , 2020, Chemical Society reviews.

[52]  O. Borodin,et al.  Real-time mass spectrometric characterization of the solid–electrolyte interphase of a lithium-ion battery , 2020, Nature Nanotechnology.

[53]  Luyi Yang,et al.  Revealing the anion intercalation behavior and surface evolution of graphite in dual-ion batteries via in situ AFM , 2020, Nano Research.

[54]  B. Dunn,et al.  Electrode Degradation in Lithium-Ion Batteries. , 2020, ACS nano.

[55]  H. Masuda,et al.  Dynamically visualizing battery reactions by operando Kelvin probe force microscopy , 2019, Communications Chemistry.

[56]  J. Mauzeroll,et al.  Effect of Substrate Permeability on Scanning Ion Conductance Microscopy: Uncertainty in Tip-Substrate Separation and Determination of Ionic Conductivity. , 2019, Analytical chemistry.

[57]  Ravindra Kempaiah,et al.  Scanning probe microscopy based characterization of battery materials, interfaces, and processes , 2019, Nano Energy.

[58]  L. Wan,et al.  Ultra-thin solid electrolyte interphase evolution and wrinkling processes in molybdenum disulfide-based lithium-ion batteries , 2019, Nature Communications.

[59]  Kiran Mahankali,et al.  In situ Electrochemical Mapping of Lithium-Sulfur Battery Interfaces using AFM-SECM. , 2019, Nano letters.

[60]  Yuming Zhao,et al.  Stable Li Metal Anode by a Hybrid Lithium Polysulfidophosphate/Polymer Cross-Linking Film , 2019, ACS Energy Letters.

[61]  L. Wan,et al.  Revealing the Surface Effect of the Soluble Catalyst on Oxygen Reduction/Evolution in Li-O2 Batteries. , 2019, Journal of the American Chemical Society.

[62]  David P. Hickey,et al.  Scalable and safe synthetic organic electroreduction inspired by Li-ion battery chemistry , 2019, Science.

[63]  A. Hubin,et al.  Direct Correlation between Local Surface Potential Measured by Kelvin Probe Force Microscope and Electrochemical Potential of LiNi0.80Co0.15Al0.05O2 Cathode at Different State of Charge , 2018, The Journal of Physical Chemistry C.

[64]  M. Winter,et al.  Before Li Ion Batteries. , 2018, Chemical reviews.

[65]  Tongchao Liu,et al.  In situ quantification of interphasial chemistry in Li-ion battery , 2018, Nature Nanotechnology.

[66]  M. Inaba,et al.  Artificial lithium fluoride surface coating on silicon negative electrodes for the inhibition of electrolyte decomposition in lithium-ion batteries: visualization of a solid electrolyte interphase using in situ AFM. , 2018, Nanoscale.

[67]  Yu‐Guo Guo,et al.  Interfacial Mechanism in Lithium-Sulfur Batteries: How Salts Mediate the Structure Evolution and Dynamics. , 2018, Journal of the American Chemical Society.

[68]  Shuwei Wang,et al.  Effect of LiFSI Concentrations To Form Thickness- and Modulus-Controlled SEI Layers on Lithium Metal Anodes , 2018 .

[69]  Xuan Hu,et al.  A lithium–oxygen battery with a long cycle life in an air-like atmosphere , 2018, Nature.

[70]  Arumugam Manthiram,et al.  Electrode–electrolyte interfaces in lithium-based batteries , 2018 .

[71]  Jun Lu,et al.  High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries , 2018, Electrochemical Energy Reviews.

[72]  Chenglong Zhao,et al.  Advances in Understanding Materials for Rechargeable Lithium Batteries by Atomic Force Microscopy , 2018 .

[73]  Xianlong Wei,et al.  Mechanical Properties of 2D Materials Studied by In Situ Microscopy Techniques , 2018 .

[74]  Ya‐Xia Yin,et al.  A Flexible Solid Electrolyte Interphase Layer for Long-Life Lithium Metal Anodes. , 2018, Angewandte Chemie.

[75]  Ji‐Guang Zhang,et al.  Direct Observation of the Growth of Lithium Dendrites on Graphite Anodes by Operando EC‐AFM , 2018 .

[76]  Deyu Wang,et al.  Operando study of Fe3O4 anodes by electrochemical atomic force microscopy , 2017 .

[77]  A. Kholkin,et al.  Quantitative characterization of the ionic mobility and concentration in Li-battery cathodes via low frequency electrochemical strain microscopy. , 2017, Nanoscale.

[78]  Yu‐Guo Guo,et al.  High-Temperature Formation of a Functional Film at the Cathode/Electrolyte Interface in Lithium-Sulfur Batteries: An In Situ AFM Study. , 2017, Angewandte Chemie.

[79]  Shuru Chen,et al.  Organosulfide-plasticized solid-electrolyte interphase layer enables stable lithium metal anodes for long-cycle lithium-sulfur batteries , 2017, Nature Communications.

[80]  M. Stich,et al.  In Situ Studies of Solid Electrolyte Interphase (SEI) Formation on Crystalline Carbon Surfaces by Neutron Reflectometry and Atomic Force Microscopy. , 2017, ACS applied materials & interfaces.

[81]  Tongchao Liu,et al.  Effect of sulfur-containing additives on the formation of a solid-electrolyte interphase evaluated by in situ AFM and ex situ characterizations , 2017 .

[82]  L. Wan,et al.  Direct Visualization of Nucleation and Growth Processes of Solid Electrolyte Interphase Film Using in Situ Atomic Force Microscopy. , 2017, ACS applied materials & interfaces.

[83]  W. Lu,et al.  In Situ Visualized Cathode Electrolyte Interphase on LiCoO2 in High Voltage Cycling. , 2017, ACS applied materials & interfaces.

[84]  Xuejie Huang,et al.  Dendrite-Free Lithium Deposition with Self-Aligned Columnar Structure in a Carbonate–Ether Mixed Electrolyte , 2017 .

[85]  Li Lu,et al.  Temperature-Dependent Lithium-Ion Diffusion and Activation Energy of Li1.2Co0.13Ni0.13Mn0.54O2 Thin-Film Cathode at Nanoscale by Using Electrochemical Strain Microscopy. , 2017, ACS applied materials & interfaces.

[86]  H. Masuda,et al.  Internal potential mapping of charged solid-state-lithium ion batteries using in situ Kelvin probe force microscopy. , 2017, Nanoscale.

[87]  Yi Cui,et al.  Designing high-energy lithium-sulfur batteries. , 2016, Chemical Society reviews.

[88]  Chunzeng Li,et al.  In Situ and Operando Investigations of Failure Mechanisms of the Solid Electrolyte Interphase on Silicon Electrodes , 2016 .

[89]  Hyun-Wook Lee,et al.  Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries , 2016, Nature Energy.

[90]  Deyu Wang,et al.  Direct visualization of solid electrolyte interphase on Li4Ti5O12 by in situ AFM , 2016 .

[91]  Rui Zhang,et al.  Li2S5-based ternary-salt electrolyte for robust lithium metal anode , 2016 .

[92]  Chunzeng Li,et al.  Control and Optimization of the Electrochemical and Mechanical Properties of the Solid Electrolyte Interphase on Silicon Electrodes in Lithium Ion Batteries , 2016 .

[93]  W. Han,et al.  In Situ AFM Imaging of Solid Electrolyte Interfaces on HOPG with Ethylene Carbonate and Fluoroethylene Carbonate-Based Electrolytes. , 2015, ACS applied materials & interfaces.

[94]  W. Schuhmann,et al.  Combined AFM/SECM Investigation of the Solid Electrolyte Interphase in Li‐Ion Batteries , 2015 .

[95]  R. Atkin,et al.  Structure and nanostructure in ionic liquids. , 2015, Chemical reviews.

[96]  L. Wan,et al.  In situ observation of electrolyte-concentration-dependent solid electrolyte interphase on graphite in dimethyl sulfoxide. , 2015, ACS applied materials & interfaces.

[97]  Dong Wang,et al.  Facet dependent SEI formation on the LiNi(0.5)Mn(1.5)O4 cathode identified by in situ single particle atomic force microscopy. , 2014, Chemical communications.

[98]  Yu‐Guo Guo,et al.  Single nanowire electrode electrochemistry of silicon anode by in situ atomic force microscopy: solid electrolyte interphase growth and mechanical properties. , 2014, ACS applied materials & interfaces.

[99]  Arumugam Manthiram,et al.  Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.

[100]  Collin R. Becker,et al.  In situ atomic force microscopy nanoindentation of lithiated silicon nanopillars for lithium ion batteries , 2014 .

[101]  Brian W. Sheldon,et al.  In situ atomic force microscopy study of initial solid electrolyte interphase formation on silicon electrodes for Li-ion batteries. , 2014, ACS applied materials & interfaces.

[102]  A. Kornyshev,et al.  Ionic liquids at electrified interfaces. , 2014, Chemical reviews.

[103]  H. Byon,et al.  In situ monitoring of the Li-O2 electrochemical reaction on nanoporous gold using electrochemical AFM. , 2014, Chemical communications.

[104]  Kang Xu,et al.  In situ and quantitative characterization of solid electrolyte interphases. , 2014, Nano letters.

[105]  Quinn P. McAllister,et al.  In situ atomic force microscopy of lithiation and delithiation of silicon nanostructures for lithium ion batteries. , 2013, ACS nano.

[106]  H. Byon,et al.  In situ AFM imaging of Li-O2 electrochemical reaction on highly oriented pyrolytic graphite with ether-based electrolyte. , 2013, Journal of the American Chemical Society.

[107]  B. Chowdari,et al.  Metal oxides and oxysalts as anode materials for Li ion batteries. , 2013, Chemical reviews.

[108]  Li Lu,et al.  Nanoscale mapping of lithium-ion diffusion in a cathode within an all-solid-state lithium-ion battery by advanced scanning probe microscopy techniques. , 2013, ACS Nano.

[109]  Albert L. Lipson,et al.  Nanoscale In Situ Characterization of Li‐ion Battery Electrochemistry Via Scanning Ion Conductance Microscopy , 2011, Advanced materials.

[110]  Robert Kostecki,et al.  In situ AFM studies of SEI formation at a Sn electrode , 2009 .

[111]  Tongchao Liu,et al.  Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries , 2021 .