Novel hollow mesoporous 1D TiO2 nanofibers as photovoltaic and photocatalytic materials.

Hollow mesoporous one dimensional (1D) TiO(2) nanofibers are successfully prepared by co-axial electrospinning of a titanium tetraisopropoxide (TTIP) solution with two immiscible polymers; polyethylene oxide (PEO) and polyvinylpyrrolidone (PVP) using a core-shell spinneret, followed by annealing at 450 °C. The annealed mesoporous TiO(2) nanofibers are found to having a hollow structure with an average diameter of 130 nm. Measurements using the Brunauer-Emmett-Teller (BET) method reveal that hollow mesoporous TiO(2) nanofibers possess a high surface area of 118 m(2) g(-1) with two types of mesopores; 3.2 nm and 5.4 nm that resulted from gaseous removal of PEO and PVP respectively during annealing. With hollow mesoporous TiO(2) nanofibers as the photoelectrode in dye sensitized solar cells (DSSC), the solar-to-current conversion efficiency (η) and short circuit current (J(sc)) are measured as 5.6% and 10.38 mA cm(-2) respectively, which are higher than those of DSSC made using regular TiO(2) nanofibers under identical conditions (η = 4.2%, J(sc) = 8.99 mA cm(-2)). The improvement in the conversion efficiency is mainly attributed to the higher surface area and mesoporous TiO(2) nanostructure. It facilitates the adsorption of more dye molecules and also promotes the incident photon to electron conversion. Hollow mesoporous TiO(2) nanofibers with close packing of grains and crystals intergrown with each other demonstrate faster electron diffusion, and longer electron recombination time than regular TiO(2) nanofibers as well as P25 nanoparticles. The surface effect of hollow mesoporous TiO(2) nanofibers as a photocatalyst for the degradation of rhodamine dye was also investigated. The kinetic study shows that the hollow mesoporous surface of the TiO(2) nanofibers influenced its interactions with the dye, and resulted in an increased catalytic activity over P25 TiO(2) nanocatalysts.

[1]  F. Besenbacher,et al.  Light-driven wettability changes on a photoresponsive electrospun mat. , 2011, ACS nano.

[2]  Xiaoming Yin,et al.  Electrospun porous SnO2 nanotubes as high capacity anode materials for lithium ion batteries , 2010 .

[3]  Jun Song,et al.  Controlled wall thickness and porosity of polymeric hollow nanofibers by coaxial electrospinning , 2010 .

[4]  Baozhu Tian,et al.  Comparative studies of operational parameters of degradation of azo dyes in visible light by highly efficient WOx/TiO2 photocatalyst. , 2010, Journal of hazardous materials.

[5]  S. Zakeeruddin,et al.  Enhanced electron collection efficiency in dye-sensitized solar cells based on nanostructured TiO(2) hollow fibers. , 2010, Nano letters.

[6]  Dong Young Kim,et al.  Charge Transport Characteristics of High Efficiency Dye-Sensitized Solar Cells Based on Electrospun TiO2 Nanorod Photoelectrodes , 2009 .

[7]  C. Grimes,et al.  Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells. , 2009, Nature nanotechnology.

[8]  Seeram Ramakrishna,et al.  Electron transport in electrospun TiO2 nanofiber dye-sensitized solar cells , 2009 .

[9]  Fanming Meng,et al.  Photocatalytic activity of TiO2 thin films deposited by RF magnetron sputtering , 2009 .

[10]  Meifang Zhu,et al.  Highly porous fibers prepared by electrospinning a ternary system of nonsolvent/solvent/poly(l-lactic acid) , 2009 .

[11]  Y. Mortazavi,et al.  Nano-ceria–zirconia promoter effects on enhanced coke combustion and oxidation of CO formed in regeneration of silica–alumina coked during cracking of triisopropylbenzene , 2009 .

[12]  Jinxian Wang,et al.  Preparation of LaFeO3 Porous Hollow Nanofibers by Electrospinning , 2009 .

[13]  Mohammad Khaja Nazeeruddin,et al.  Fabrication of screen‐printing pastes from TiO2 powders for dye‐sensitised solar cells , 2007 .

[14]  M. Paoli,et al.  Dye-sensitized solar cells based on TiO2 nanotubes and a solid-state electrolyte , 2007 .

[15]  Farook Adam,et al.  Indium incorporated silica from rice husk and its catalytic activity , 2007 .

[16]  J. Leckie,et al.  An efficient bicomponent TiO2/SnO2 nanofiber photocatalyst fabricated by electrospinning with a side-by-side dual spinneret method. , 2007, Nano letters.

[17]  S. Yoshikawa,et al.  Synthesis, characterization, photocatalytic activity and dye-sensitized solar cell performance of nanorods/nanoparticles TiO2 with mesoporous structure , 2006 .

[18]  C. Zheng,et al.  Study of the electronic structure and photocatalytic activity of the BiOCl photocatalyst , 2006 .

[19]  D. Y. Kim,et al.  Ultrasensitive chemiresistors based on electrospun TiO2 nanofibers. , 2006, Nano letters.

[20]  Craig A Grimes,et al.  Use of highly-ordered TiO(2) nanotube arrays in dye-sensitized solar cells. , 2006, Nano letters.

[21]  Michael Grätzel,et al.  Solar energy conversion by dye-sensitized photovoltaic cells. , 2005, Inorganic chemistry.

[22]  W. Sigmund,et al.  Bicontinuous porosity in ceramics utilizing polymer spinodal phase separation , 2005 .

[23]  Younan Xia,et al.  Electrospinning of Nanofibers: Reinventing the Wheel? , 2004 .

[24]  Younan Xia,et al.  Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning , 2004 .

[25]  Taiho Park,et al.  A supramolecular approach to lithium ion solvation at nanostructured dye sensitised inorganic/organic heterojunctions. , 2003, Chemical communications.

[26]  Brian A. Gregg,et al.  Excitonic Solar Cells , 2003 .

[27]  W. Ho,et al.  Preparation of highly photocatalytic active nano-sized TiO2 particles via ultrasonic irradiation. , 2001, Chemical communications.

[28]  C. Brabec,et al.  Origin of the Open Circuit Voltage of Plastic Solar Cells , 2001 .

[29]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .

[30]  A. J. Frank,et al.  Comparison of Dye-Sensitized Rutile- and Anatase-Based TiO2 Solar Cells , 2000 .

[31]  Albert Compte,et al.  Anomalous transport effects in the impedance of porous film electrodes , 1999 .

[32]  Mohammad Khaja Nazeeruddin,et al.  Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes , 1993 .

[33]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[34]  Geoffrey Ingram Taylor,et al.  Disintegration of water drops in an electric field , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[35]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .

[36]  M. Grätzel.  Photoelectrochemical cells , 2001, Nature.